OzSTOC

Buy Swap & Sell => Buy, Sell, Swap, Trade, Wanted.... => Topic started by: Z900owner on June 16, 2019, 08:02:39 PM

Title: Selling everything in the shed in one lot
Post by: Z900owner on June 16, 2019, 08:02:39 PM: It has come to that stage where I am going to sell the house and downsize so this lot has to go. :agro:

Some of these parts I have accumulated over many years and no longer need the rest come from a bike that was stripped to get the low Km motor out of it,

I want to sell the whole lot in one package, I have been selling the panniers for $250 each and there are 4 of them here so there is $1,000 value alone.

1 x main frame build date 10/2006 complete with rear sub frame to suit a police bike, left and right foot peg pillion bracket mounts (frames that the foot pegs bolt onto )(includes front foot pegs only)
with a set of triple trees, a pair of pannier box release handles, the rear pillion grab rail, the right hand handle bar, the frame that goes around the front of the headlight and fairing, a rear police pod

2 x tail light surrounds one is the light red off the 2004 ST1300 :rd13 the other is a white one :wht13
Complete ABS brake system including calipers, lines and master cylinders, taken off the bike in one piece
1 x tail light assembly
1 x dash fascia surround
1 x front wheel with tyre
3 x brake discs
1 x left hand panel (white) that covers the battery (has a split but can be repaired)
1 x right hand glove box pocket
3 x left hand panniers
1 x right hand pannier
1 x left and 1 x right hand pannier lid (white)
2 x right hand lower fairings (dark grey)
2 x left hand lower fairings (white)
2 x adjustable seat brackets
1 x horn
2 x pannier lock assemblies

$1,200 the lot, come and take it away. I am hopeless at uploading photos but I can send them by phone if you need any.
Title: Re: ST1300 PARTS Shed cleanout
Post by: RubenCan on June 18, 2019, 10:11:33 PM: You wouldn't happen to have highway blades, would you? Something to stretch my weary legs on on those long rides.

Ruben
Title: Re: ST1300 PARTS Shed cleanout
Post by: Z900owner on June 19, 2019, 02:47:09 AM: Sorry but I don't have any.
Title: Re: ST1300 PARTS Shed cleanout
Post by: Skip on June 19, 2019, 10:56:50 AM: Is the single Police seat different to the standard one? I wouldn't mind getting hold of an OEM riders seat.
Title: Re: ST1300 PARTS Shed cleanout
Post by: Z900owner on June 19, 2019, 01:18:05 PM: Hi

They are the same seat but the bracket that bolts on the back is different, if you have an old seat they are easy to swap over

Regards

John
Title: Re: ST1300 PARTS Shed cleanout
Post by: Draco (Heartbreak Kid) on June 19, 2019, 04:39:57 PM: :blu13 By any slim chance do you happen to have a spare alternator there? :grin :grin :think1 :blu13left
Title: Re: ST1300 PARTS Shed cleanout
Post by: Z900owner on June 19, 2019, 07:27:34 PM: Hi, there are no engine parts at all, Sorry
Title: Re: ST1300 PARTS Shed cleanout
Post by: Draco (Heartbreak Kid) on June 20, 2019, 02:45:53 AM: :blu13 No worries thanks for that. Have a great day ++ :blu13left
Title: Re: ST1300 PARTS Shed cleanout
Post by: richo on July 07, 2019, 04:50:33 PM: Is the right hand pannier still available? What colour is it
Title: Re: ST1300 PARTS Shed cleanout
Post by: Brock on July 07, 2019, 07:14:53 PM: Probably white, knowing John.
Title: Re: ST1300 PARTS Shed cleanout
Post by: alans1100 on July 07, 2019, 07:32:48 PM: Quote from: Z900owner on June 16, 2019, 08:02:39 PM

2 x tail light surrounds one is the light red off the 2004 ST1300 :rd13 the other is a white one :wht13 $30 each

I'd be interested in the red one if it is not damaged. See image of mine where the side panel bolts on. Both sides are the same.

(https://live.staticflickr.com/4888/45210464704_c96d507efa_b.jpg) (https://flic.kr/p/2bT6s3L)20181118_174241 (https://flic.kr/p/2bT6s3L) by Alan (https://www.flickr.com/photos/152195423@N05/), on Flickr
Title: Re: ST1300 PARTS Shed cleanout
Post by: West Aussie Glen on July 07, 2019, 08:09:43 PM: Guys Z900 lives close to me and I am doing the border run on the goldwing so have a little carrying capacity it helps anyone by getting stuff to the border. Also about 15/16 Sept I will be heading for Tassie via Victor Harbor and Melbourne in the sidecar. I will be by myself so shall have a fair amount of space. Shall be in Melbourne by 23rd Sept.
Title: Re: ST1300 PARTS Shed cleanout
Post by: Z900owner on July 07, 2019, 09:56:43 PM: Hi

I do have one in red, it is in good condition but has a couple of light scratches on the back section that may polish out, they are not very noticeable, I can send photos if you like

Regards John
Title: Re: ST1300 PARTS Shed cleanout
Post by: Z900owner on July 07, 2019, 09:59:30 PM: I have a right hand pannier complete and I also have a right hand pannier lid, (the last right hand ones that are left)
I have 3 left hand panniers and 1 left hand pannier lid,

Regards John
Title: Re: ST1300 PARTS Shed cleanout
Post by: richo on July 07, 2019, 10:04:14 PM: Hi John. Sounds like it could do the job. What are you asking? I still have to talk to my insurer and see what they want but I always like to be in the front foot.
Title: Re: ST1300 PARTS Shed cleanout
Post by: alans1100 on July 07, 2019, 11:38:25 PM: Quote from: Z900owner on July 07, 2019, 09:56:43 PM
Hi

I do have one in red, it is in good condition but has a couple of light scratches on the back section that may polish out, they are not very noticeable, I can send photos if you like

Regards John

Thanks, a photo would be fine. I don't expect perfection from a used 2004 part. There are some minor scratches on the bikes LH side case anyway. A new part costs about $US100 which is a lot just to fix up two holes.