OzSTOC
Farkles, Gear & Accessories => Farkles and Gear General Section => Topic started by: terrydj on May 02, 2012, 04:02:28 PM
-
So I'm in SuperCheap having a look round and come across those Back Fairning clip, screw things that hold things together, so I buys me a couple of boxes that have 2 in em each. Now the things sell for more than gold from your frienly :rofl HONDA dealer but from SuperCheap their like $3.00 for a box of 2 :thumbsup. Heres a pic or 2 of the things I mean. No idea if their the right size or whatever but they fit my ST1100 just like the ones from HONDA made out of Black Plastic Gold
(http://i21.photobucket.com/albums/b268/terryjohns/photo.jpg) (http://i21.photobucket.com/albums/b268/terryjohns/photo1.jpg)
-
:thumbs :thumbs :thumbs :beer :beer
And now for a slight thread drift.....
Who has been monkeying with my signature, (Just noticed it) Diesel....... :law :law
-
And now for a slight thread drift.....
Diesel, Streak!! We have a :hijacked
Smite him!! :well
-
:thumbs :thumbs :thumbs :beer :beer
And now for a slight thread drift.....
Who has been monkeying with my signature, (Just noticed it) Diesel....... :law :law
Took your time mate - hope you had a good'n.
And don't worry - I'll take over the investigations into the mischievous monkey who dillied your sig and take all the appropriate action. :wink1
Meanwhile - thanks Terry for the tip - your are right about the STealership prices on these things! :cuss
-
When I needed one for the front fairing on my 1100 I went to the local panel beater and he just gave me one, said it was too much trouble to write a docket. :bl11
-
I got some from the States last year from a place called Cyclemax or Big Bike Parts.
They're listed as GL1800 parts but they fit the 1300 just fine.
You get 10 in a box. I got 3 types (3 boxes) and even with postage it only came to $30.
Item numbers: B3-104 1800 Rivets. $6
B3-106 1800 Low Profile Plastic Rivets $6
B3-112 Flush Reusable Rivets $8
Shipping. $10
LOTS CHEAPER THAN HONDA
-
Just bought a pack of 10 bullet rivets from my local Honda dealer $6.00. Look better than the ST1300 rivets and seem stronger, I think they're used in their quad bikes.....just another option!
(http://i1213.photobucket.com/albums/cc462/DownUnder193/IMG_1642.jpg)
-
Just got these delivered offs Ebay. $7.00 for 20. Tried one out on the ST1100 and bloody perfect. Maybe I can sell em to honda cheap and still makes heaps of proffit.
Link: http://www.ebay.com/itm/20-x-Plastic-Fender-Fastener-Rivet-Honda-Prelude-92?item=250764698238&cmd=ViewItem&_trksid=p5197.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D5%26po%3DLVI%26ps%3D63%26clkid%3D8655047834033373870
-
I got some from the States last year from a place called Cyclemax or Big Bike Parts.
They're listed as GL1800 parts but they fit the 1300 just fine.
You get 10 in a box. I got 3 types (3 boxes) and even with postage it only came to $30.
Item numbers: B3-104 1800 Rivets. $6
B3-106 1800 Low Profile Plastic Rivets $6
B3-112 Flush Reusable Rivets $8
Shipping. $10
LOTS CHEAPER THAN HONDA
Shipping costs have gone up since then $30 now BigBike Parts
$42 Cyclemax
-
Thanks for that Gavo :like
I have place them on my shopping list :wink1
-
:dred11
are these the same?
http://www.ebay.com/itm/20-x-Nylon-Fastener-Rivet-Push-Type-Retainer-Clips-Fender-Honda-18-x-15-x-8mm/250929579172?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D24189%26meid%3D784d9421d1724d42a40c35bacde0d974%26pid%3D100011%26prg%3D10283%26rk%3D1%26rkt%3D10%26sd%3D250764698238 (http://www.ebay.com/itm/20-x-Nylon-Fastener-Rivet-Push-Type-Retainer-Clips-Fender-Honda-18-x-15-x-8mm/250929579172?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D24189%26meid%3D784d9421d1724d42a40c35bacde0d974%26pid%3D100011%26prg%3D10283%26rk%3D1%26rkt%3D10%26sd%3D250764698238)