OzSTOC
Welcome - Getting started & FAQs - Read Here First... => Introduce Yourself & Your Bike => Topic started by: Chrish on June 30, 2022, 12:28:26 PM
-
Hi Everyone
My much loved ST1100 1998 has a failed alternator. My brother and I are starting the process of pulling the bike apart to remedy. A few things. I need to get the special tool needed for swing arm removal. And can anyone advise me about having the alternator rebuilt. I live in the Midwest of WA so any help would be greatly appreciated as there is no one in my location that can assist.
Regards
Chris Holt.
-
First up, a big welcome from Sth Gippsland Victoria, Chris... :beer
Not sure if this is any help to you??? https://tinyurl.com/44uv9hnh
-
There's also this: https://youtu.be/Fzbe4dSdYwc
Be sure to also read the comments... :thumbs
And then there's this: https://youtu.be/wD89Unfn7uw
Probably best viewed with the volume turned down... :whistle
-
Welcome to the group!
For the swingarm tool I bought a cheap 2nd-hand 1-3/16 socket from a tool seller at the local markets and attacked it with an angle grinder.