OzSTOC

General Category => General Discussion => Topic started by: Robert Knight on August 04, 2022, 10:29:49 AM

Title: Rear brake disc spec
Post by: Robert Knight on August 04, 2022, 10:29:49 AM

Hi,Can someone tell me the minimum thickness allowed on rear brake discs fo an ST1100,also are abs and normal rear discs all the same fit up,and are rear brake pedal travel distances adjustable,or is travel strictly determined by pad and disc thickness?Tia.

Title: Re: Rear brake disc spec
Post by: Biggles on August 04, 2022, 11:03:09 AM

I recall 4mm was stamped on the disk itself.

Title: Re: Rear brake disc spec
Post by: Brock on August 04, 2022, 01:06:28 PM

From page 1-13 of the owners hand book, min thickness is 4.0mm  front or rear.

Metal gear are a good source of pads and replacement discs for the 1100 and 1300


https://www.metalgear.com.au/part-finder/honda/2001/st-1100-pan-european/ (https://www.metalgear.com.au/part-finder/honda/2001/st-1100-pan-european/)