OzSTOC

Honda ST1300 Section => Honda ST1300 General Questions => Topic started by: STMick on June 13, 2024, 06:34:07 PM

Title: 1300ABS front wheel removal..
Post by: STMick on June 13, 2024, 06:34:07 PM

Hey guys, regarding removing the front wheel on the ABS bikes, do I need to undo and remove the ABS pickup thing? Undone the 2 caliper bolts but it seems to not want to move, figured I would ask before I force and break something..🙂
Thanks
Mick

Title: Re: 1300ABS front wheel removal..
Post by: STMick on June 13, 2024, 07:14:49 PM

Sorted, discs are a bit worn and lipped..

Title: Re: 1300ABS front wheel removal..
Post by: Brock on June 14, 2024, 12:57:45 PM

New good quality disks and pads can be found at Metal Gear

http://metalgear.com.au (http://metalgear.com.au)

Title: Re: 1300ABS front wheel removal..
Post by: Biggles on June 14, 2024, 03:05:47 PM

Your bio and profile don't say where you are, but if you're in Brisbane, their warehouse and shop is in Brendale.

Title: Re: 1300ABS front wheel removal..
Post by: STMick on June 14, 2024, 06:06:57 PM

Thank you both.. Was tossing up between metal gear and EBC when I bite the bullet.

Title: Re: 1300ABS front wheel removal..
Post by: STMick on June 14, 2024, 06:08:13 PM

PS . I'm in South Australia.

Title: Re: 1300ABS front wheel removal..
Post by: ruSTynutz on June 14, 2024, 10:08:24 PM

I'm running the Metal Gear sintered S2 pads on my 2005 ST300 and have been more than happy with them.  :thumbs
I thought the prices for the pads were pretty reasonable too...

https://www.metalgear.com.au/part-finder/honda/2005/st-1300-a-abs/ (https://www.metalgear.com.au/part-finder/honda/2005/st-1300-a-abs/)

Title: Re: 1300ABS front wheel removal..
Post by: STMick on June 19, 2024, 03:03:19 PM

Quote from: ruSTynutz on June 14, 2024, 10:08:24 PM

I'm running the Metal Gear sintered S2 pads on my 2005 ST300 and have been more than happy with them.  :thumbs
I thought the prices for the pads were pretty reasonable too...

https://www.metalgear.com.au/part-finder/honda/2005/st-1300-a-abs/ (https://www.metalgear.com.au/part-finder/honda/2005/st-1300-a-abs/)

Thanks for that..