OzSTOC
Honda ST1300 Section => Honda ST1300 Tools and Handy Gadgets => Topic started by: ruSTynutz on March 10, 2026, 06:11:40 PM
-
(https://i.ibb.co/4w6gxZ9Z/Spark-Plug-Socket.png)
I ordered a pair of swivel spark plug sockets online from Amazon when I decided to swap out the Iridium Plugs for some standard plugs recently.
There is a spark plug socket in the bike's tool kit but as it's a bit of a pain having to dig it out from under the seat every time you want to check
the plugs I figured this new swivel spark plug socket would be a good addition to my tool box.
Of course the new plugs arrived before the spark plug sockets so I was forced to use the bike tool kit anyhow! :fp
The sockets finally arrived today and they appear to be of reasonable quality and should do the job...
I actually only needed the 16mm one but figured the 14mm one may be of use elsewhere... :/
If anyone is interested in purchasing a set for themselves, here's a link: https://tinyurl.com/33ep6a3p
Cheers :beer
-
They look very handy.
-
Hopefully! :grin
They have a very strong magnet inside that will easily hold the sparkplug as you withdraw it... :thumbs
-
They have a very strong magnet inside that will easily hold the sparkplug as you withdraw it... :thumbs
Shut up and take my money! I've been undoing plugs and then reaching down the hole with a set of spring tweezers to fish the spark plug out.
-
Piece of 3/8th rubber hose works well too.
-
Piece of 3/8th rubber hose works well too.
We're still talking about spark plug removal, yeah? :think1 ;-* :rofl
-
Piece of 3/8th rubber hose works well too.
We're still talking about spark plug removal, yeah? :think1 ;-* :rofl
:Norty
-
Don't know what you blokes are on about but this is what I use.