OzSTOC

Honda ST1300 Section => Plastic, Fairings, Panniers and Top Box's 1300 => Topic started by: BCinOZ on March 15, 2026, 03:20:55 PM

Title: Fairing buttons
Post by: BCinOZ on March 15, 2026, 03:20:55 PM
Where can I get some of the larger plastic push thingies that hold the plastic on?
Some of mine have become brittle with heart. Some of the smaller ones that have the push button would be good too.
Thanks people.
Brad.
Title: Re: Fairing buttons
Post by: ruSTynutz on March 15, 2026, 03:37:14 PM
Search panel clips honda st1300 on eBay and you should find some...  :thumbsup
Title: Re: Fairing buttons
Post by: Brookester on March 15, 2026, 04:05:29 PM
Available at motor accessory stores, Supercheap, Repco, etc. Called plastic push rivets https://www.supercheapauto.com.au/p/champion-champion-plastic-push-rivets---pp66-panel-pack/6468.html (https://www.supercheapauto.com.au/p/champion-champion-plastic-push-rivets---pp66-panel-pack/6468.html)
Title: Re: Fairing buttons
Post by: BCinOZ on March 15, 2026, 04:05:53 PM
Thanks Rusty.
I was hoping for; They’ve got em a Bunnings!,
Title: Re: Fairing buttons
Post by: ruSTynutz on March 15, 2026, 04:37:35 PM
I must check them out...  :crackup
Title: Re: Fairing buttons
Post by: BCinOZ on March 16, 2026, 04:11:08 PM
Quote from: Brookester on March 15, 2026, 04:05:29 PM
Available at motor accessory stores, Supercheap, Repco, etc. Called plastic push rivets https://www.supercheapauto.com.au/p/champion-champion-plastic-push-rivets---pp66-panel-pack/6468.html (https://www.supercheapauto.com.au/p/champion-champion-plastic-push-rivets---pp66-panel-pack/6468.html)

Thanks very much for that mate!
I’d already bought the exact ones from repco! Was hoping for originals, but I’m sure they’ll be fine.
Regards
Brad.
Title: Re: Fairing buttons
Post by: DaleAP on March 16, 2026, 04:15:02 PM
I recently ordered some through my local Honda dealer, but there aren't many OEM's left.
Title: Re: Fairing buttons
Post by: Williamson on March 16, 2026, 04:44:28 PM
Have a bag of assorted fairing clips and studs.  Got a pack of  around 100 off eBay.  Lots of shapes and sizes, but not all needed for the ST1300 were included.   But sorting them usually found what was needed.  Mostly black and some grey, even used some when refitting some trim on the Honda Civic. 

Bought 'em years back, so now can't find the listing, but something like this.

(https://i.ibb.co/jkGvRbjw/fairing-clips.webp) (https://ibb.co/TMRBLYN0)

If any of the VIC's are interested, I'll bring 'em to Blackwood, or if someone interstate wants 'em, I'll post at their cost (probably around $5 to $10).
Title: Re: Fairing buttons
Post by: ruSTynutz on March 16, 2026, 07:47:05 PM
From my limited research there are 5 different pins/clips used on the ST1300...
Here are the part numbers and quantity:

I've found that searching the part number in Google "AI Mode" will give you info on the size hole and length...
Cheers  :beer
Title: Re: Fairing buttons
Post by: Shiney on March 16, 2026, 08:38:19 PM
Quote from: ruSTynutz on March 16, 2026, 07:47:05 PM
From my limited research there are 5 different pins/clips used on the ST1300...
Here are the part numbers and quantity:
  • 91549-MW0-790ZA - (8x)
  • 90683-MBW-003 - (4x)
  • 90116-SP0-003 - (4x)
  • 90116-MCS-G00 - (4x)
  • 90657-SB0-003 - (6x)

I've found that searching the part number in Google "AI Mode" will give you info on the size hole and length...
Cheers  :beer


That is very helpful info mate, thanks for sharing :-++
I'm sure it's going to be very useful to lots of people going forward :thumbsup

Title: Re: Fairing buttons
Post by: ruSTynutz on March 16, 2026, 08:45:55 PM
Thanks Dave... :beer