OzSTOC
Farkles, Gear & Accessories => Farkles and Gear General Section => Topic started by: Streak on July 21, 2012, 01:09:39 PM
-
Well it is all up and running, photos are below, so can run and charge my GPS, and Both Teela's and my iPhones:
this is what i call the budget model as due to budget constraints is whati could afford.
GPS: Navman F15 $50
Ram Mounts, 3 of arms, 3 plates 1 smaller ball plate for the GPS ball plates $99
2 iphone USB Cables & Plugs: $10
1 double 12V Plug $5
Dash Shelf (Made by Tipsy) $20
1 Black 2 Pack Spray Pack $12.50
Total: $196.50
This is not the Be all and and end all of a setup, but it is certainly functional, and will do until i can step out and buy some more top of the line gear!
This is the Car GPS mount from the Navman that i adapted a Ram Mount Ball to fit:
(http://i1222.photobucket.com/albums/dd499/ozstoc/4946bd5d.jpg)
(http://i1222.photobucket.com/albums/dd499/ozstoc/90e98aed.jpg)
These are the USB and double 12v adaptor from Ebay again:
(http://i1222.photobucket.com/albums/dd499/ozstoc/43d2b6c3.jpg)
this is how it looks not plugged in with the ram mounts fitted:
(http://i1222.photobucket.com/albums/dd499/ozstoc/8b42b4a3.jpg)
This is the Finished product, everything is all powered up and working perfectly in the shed i am looking forward to taking it out for a proper run.
(http://i1222.photobucket.com/albums/dd499/ozstoc/e54af9d4.jpg)
-
looks neat an tidy :thumb
-
Very nice. That center spot for the GPS is the go. I bet yah after a few Kays you will tilt the Ram Mount Arm all the way towards you. near flat and tilt the GPS back towards the front on an angle
-
:thumbs well done
-
Looks awesome :thumb
-
I like how you put everything not too far off you eyeline. I've got a ram ball and power socket that mount just below the keys coming snail mail from motorcycle larry in the states. I can tell you that you saved yourself some bucks. Well done!!
-
i have discovered my centre ram arm is a touch to long, Paul from Ram Mount Australia was very helpful and found me the right length arm, so it all should be setup and good to go for Dugandan run.
Thanks for all the good words from everyone, it was pretty cool seeing it all come together!
-
Thats probably the same one I ordered.
RAM-B-323-AU or similar, a RAM short double socket with two 1" balls
-
I heard the Biggles has got hold of a LOCKABLE RAM MOUNT so that he can leave his uhf on the bike and it cannot be 'lifted' without the key to unlock the mount.
Lockable Ram Mount.... hmmmmmmm! :think1
-
I heard the Biggles has got hold of a LOCKABLE RAM MOUNT so that he can leave his uhf on the bike and it cannot be 'lifted' without the key to unlock the mount.
Lockable Ram Mount.... hmmmmmmm! :think1
Had me one for a couple of years now and it works perfect :thumb
(http://i21.photobucket.com/albums/b268/terryjohns/21sc74jrY0L.jpg)
-
Could you tell me what the shelf is made from?
-
i think tipsy used a Alloy sheet to make it
-
Thats probably the same one I ordered.
RAM-B-323-AU or similar, a RAM short double socket with two 1" balls
Not Roper then.
-
:eek :eek :eek :eek :eek :law :law
-
It's almost certainly 4mm Aluminium sheet, that's what he wanted to use for mine bu we ahd to go to 5mm 'cause the supplier had no 4mm left.
-
bu we ahd to
Me thinks its past some ones bed time. Close to mine as well.
-
Sorry Brock, didn't see your reply till 3am when I woke up with my forehead on the keyboard having typed 8 million spaces and worn out the battery in my wireless keyboard! :rofl :crackup