OzSTOC

General Category => General Discussion => Topic started by: Wal on January 10, 2013, 06:54:34 AM

Title: zumo to Iphone
Post by: Wal on January 10, 2013, 06:54:34 AM

Hi people I need help, I have a J&M Intergrata 4 Hard wired intercom to Zumo 660, Ifone 4 bluetoothed to 660.When phone rings I can hear it in intercom but I cant talk back through intercom, does any one have this combo or know whats going on.

Cheers wal


                                                                                                                   :slvr13

Title: Re: zumo to Iphone
Post by: saaz on January 10, 2013, 08:45:49 AM

Wal, I don't have the J&M setup, but had a similar issue with an Autocom system.  The Zumo wire into the base unit needed to be in a socket that was for mobile phone use to allow for talking back. If it was in the other input only sockets you could hear but not speak.

Title: Re: zumo to Iphone
Post by: Wal on January 10, 2013, 09:13:54 AM

Thanks Saaz ill give that a try

Cheers Wal

Title: Re: zumo to Iphone
Post by: DaleMcLean on January 10, 2013, 06:29:46 PM

Dont forget the cable from Zumo to system MUST have 2 connections to Zumo cable, one (2,5mm mono)  is the voice back to the Zumo thence phone, and the 2nd (3.5mm stereo) is audio out of the Zumo to the system.
As SAAZ says the system socket used must be the PHONE one not the "GPS" one
 o:)