OzSTOC
Honda ST1100 Section => Electrics & Electronics - Volts, Amps and Fuses ST1100 => Topic started by: bobSTer on June 16, 2013, 01:28:41 PM
-
Hello Brilliant Minded and Fellow St .. ers,
My '98 St1100 . for whatever reason has a Front Brake Stop Light Switch malfunction......
It has not been removed nor has any fitting near or around the lever been altered, played with or otherwise buggered up . . has me stumped, the switch still clicks when activated and I can see / find nil loose connection with dismantling.
Would one of our fellow members have suggestion/s to alleviate / repair / discard ?????
All help appreciated.
I ride ................. :dred11.............. :dred11............. :dred11............. :dred11
-
Replace.....the little micro switch inside tends to fail after some time. I go through one every 12-18 months or so.
Buy two and keep one on hand as a spare.
SWITCH ASS.. 35340-MM5-600 1 10.87 from here http://www.bluecitymotorcycles.com.au (http://www.bluecitymotorcycles.com.au) so local dealer should have similar price
-
Mine stopped working not long after I got it. I put plenty of contact cleaner through it while clicking it on, while removed of course. The connections can be a bit tricky so make sure they are on.
-
Mine suddenly stopped a couple of months ago, down to the local dealers for a new one,its the best solution. :thumbs
:wht11
-
Replace.....the little micro switch inside tends to fail after some time. I go through one every 12-18 months or so.
Sheesh! What do you do to them? Maybe every 5 years, but not 12-18 months!
Could be that harsh SA climate?
-
After I cleaned mine I have not done anything to it for 4 years or so.
-
Replace.....the little micro switch inside tends to fail after some time. I go through one every 12-18 months or so.
Sheesh! What do you do to them? Maybe every 5 years, but not 12-18 months!
Could be that harsh SA climate?
I've only replaced once while back in SA (2 years ago) but 3 over four years while living in Port Hedland and Karratha. All three had the little return spring fail so switch wouldn't work.
-
Thanks for the replies and suggestions:
Will contact Mr Honda to ascertain availability and his cost.
I Ride :dred11 :dred11 :dred11 :dred11 :dred11 :dred11