OzSTOC

General Category => General Discussion => Topic started by: excopper on August 19, 2014, 01:27:56 PM

Title: front disc's
Post by: excopper on August 19, 2014, 01:27:56 PM

 :bl11hello all,
            ok,bike is almost finished,thanks yorkie for parts, however the front disc's are bent and two wheel wreckers have been unable to replace or straighten them.
            so am looking for a supplier of after market or Honda disc's.....can anyone help.

                                cheers      Rob

Title: Re: front disc's
Post by: Biggles on August 19, 2014, 02:27:21 PM

Metal Gear at Brendale Qld are on eBay.
Good product.  Reliable supplier.

Title: Re: front disc's
Post by: saaz on August 19, 2014, 08:37:29 PM

The metal gear rotors are as good as OEM and a lot cheaper. A set will also come with matching brake pads.

Title: Re: front disc's
Post by: Yorkie on August 19, 2014, 08:39:50 PM

I have a pair Rob, you should have got in when you wanted the rest of the gear because Wombat wants the r/h, his is warped.

Title: Re: front disc's
Post by: Brock on August 19, 2014, 09:13:11 PM

I wouldnt want to be using "straightened" disks(discs, shiny round things in the middle of the wheel) Metal gear is the way to go.

Title: Re: front disc's
Post by: excopper on August 19, 2014, 11:04:25 PM

 :bl11ha ha didn't know I needed them then yorkie, but sounds like metal gear are the go,thanks again blokes :like

Title: Re: front disc's
Post by: ruSTyEB on August 20, 2014, 07:32:00 AM

I got mine from here. 
http://www.s3performance.com.au/buy/disc-brake-rotor-front-honda-st1100-shadow-triumph-900/DBFSST1192 (http://www.s3performance.com.au/buy/disc-brake-rotor-front-honda-st1100-shadow-triumph-900/DBFSST1192)

Title: Re: front disc's
Post by: excopper on August 20, 2014, 12:59:56 PM

 :bl11 Hi rustyeb,
               thanks bit cheaper,howd you find them,do the job

Title: Re: front disc's
Post by: ruSTyEB on August 20, 2014, 07:47:59 PM

Performance is great.  After rain and sitting a little while there is some small surface rust,  no more then the OEM that I can remember.

I'm happy enough that I will go a rear disc soon.