OzSTOC

Honda ST1100 Section => Honda ST1100 General Questions => Topic started by: royst1100 on February 23, 2012, 02:43:43 PM

Title: heat shielding
Post by: royst1100 on February 23, 2012, 02:43:43 PM
ive been thinking that if i get some "dynamat" heat sheild and put on the inside of some lower panels and air filter cover may increase comfort. has anyone tried this or have an opinion of if this will work
Title: Re: heat shielding
Post by: saaz on February 23, 2012, 02:58:43 PM
I have heard of people doing it as the heat got to them.  It should work, but the heat will go somewhere else.
Title: Re: heat shielding
Post by: royst1100 on February 23, 2012, 03:32:09 PM
hopefully out the side vents and around both mine and her legs. also it should absord heat going to those areas
Title: Re: heat shielding
Post by: Brock on February 23, 2012, 04:15:27 PM
I ride my 1100 every day, and havent noticed any heat discomfort. Maybe some on the under side of the shelter might help. but along the fairing sides???
Title: Re: heat shielding
Post by: royst1100 on February 23, 2012, 04:34:09 PM
ive had my autocom in right locked poket untill i tried bluetooth two weeks ago (ozstoc qld rte) after stripping autocom then i used the pockets for THINGS. didnt realise the pockets got so hot which got me thinking of a solution that may help the groin and inner thigh area
Title: Re: heat shielding
Post by: Brock on February 23, 2012, 06:48:52 PM
Stop wearing board shorts, and wear Kevlar lined Jeans. No problem :thumbsup :thumbsup
Title: Re: heat shielding
Post by: alans1100 on February 23, 2012, 09:19:22 PM
I haven't noticed any excessive heat. There is some heat on hotter days from air through the vents in the access panels but is nothing compared to a Honda 750 that I owned previously

Title: Re: heat shielding
Post by: royst1100 on February 24, 2012, 03:38:35 AM
maybe looking for the wrong solution! so new question is where does the temp gauge on other 1100s sit as mine is very low at reasonable speed but just of high temp in slow or stop speed "rises quickly" then drops just as quick when i move of

Title: Re: heat shielding
Post by: saaz on February 24, 2012, 07:47:14 AM
Sounds normal to me. Mine sits down near the bottom  while on the higway and goes up about 2/3rds until the fan kicks in.
Title: Re: heat shielding
Post by: Tipsy on February 24, 2012, 08:13:11 AM
mine as well

Tipsy
Title: Re: heat shielding
Post by: alans1100 on February 24, 2012, 10:48:31 AM
Normal for mine in warmer months is about a quarter of the solid line, a little less in the cooler months. I did notice that in city traffic that is about half way and will go to three quarters before the fan cuts in when sitting at the lights.
Title: Re: heat shielding
Post by: terrydj on February 24, 2012, 01:36:46 PM
I've never heard of an ST1100 giving off heat. The ST1300, the Yammy and Kawasaki just cook people but the ST1100 even when in the Over 40's has never been a problem. Probably why the cops liked em so much
Title: Re: heat shielding
Post by: STeveo on February 26, 2012, 05:23:11 PM
Have not had a problem with heat as I don't ride with my knees touching the panels. Am looking forward to the heat in coming winter, definatley going to flick the little square panels out that sit just in front of my knees. Maybe not so painful for my old knee joints with a warm blast on them. Anybody thought about making bigger vents for frosty mornings, or not worth the trouble? :bl11
Title: Re: heat shielding
Post by: royst1100 on February 26, 2012, 05:34:22 PM
due to the history of the my1100 i may have cracked or broken panel seals