OzSTOC
Farkles, Gear & Accessories => Lights and Lighting => Topic started by: caverboo on June 20, 2015, 05:01:45 PM
-
have just fitted a classic towbar but dont have a clue how to wire it.can someone help me please.
-
have just fitted a classic towbar but dont have a clue how to wire it.can someone help me please.
G'day Caverboo and welcome along to OzSTOC.
Are you working on a ST1100 or a ST1300 ??
Here is a link that may help you if yours is a 1100.....http://ozstoc.com/index.php?topic=5647.0 (http://ozstoc.com/index.php?topic=5647.0) You will see a pic in the thread that may help you..... If this is any good to you it was posted by Pezzz from WA.
Come and introduce yourself in the Intro section on our forum.....members are a lot more likely to provide assistance to those who drop in and say howdy :think1
:beer
-
Here's a direct link to the wiring for the plugs. http://www.narva.com.au/products/browse/wiring-diagrams (http://www.narva.com.au/products/browse/wiring-diagrams) I connected mine in behind the rear lights.
-
thanks for your help i have a 2010 1300 and a small cargo trailer already wired.fitted tow bar ok but not sure where to get the wires from for power.cheers
-
Caverboo, the wiring harness you will need to access is in the tail of the ST, unfortunately their is no plug & play option and you will need to splice in.....
If you are at all concerned about your ability to locate, splice, solder the trailer wire into the ST.....just run the trailer wire from ther plug wired as per Allans diagram into the tail and have a local Auto Elec complete......it would honestly take them well less than an hour to complete properly.
cheers
-
thanks chris,im going to do that.cheers