OzSTOC

General Category => General Discussion => Topic started by: Bill Held on September 12, 2015, 08:47:23 PM

Title: Metal Polishing
Post by: Bill Held on September 12, 2015, 08:47:23 PM

Hi all,
chasing a quality metal polisher in the Redlands, Qld if anyone can point me in the right direction.
I have a riser that I would like to have given the bling treatment.
 :blu13

Title: Re: Metal Polishing
Post by: Brock on September 12, 2015, 08:54:51 PM

You should be able to do it your self, all you need is a buffing wheel and polishing compound and patience. Just dont press to hard. You could use brasso and a soft cloth, but it would take a while.

Title: Re: Metal Polishing
Post by: Bill Held on September 12, 2015, 08:57:03 PM

Thanks Brock,
have none of the above so will keep looking.
 :blu13

Title: Re: Metal Polishing
Post by: Brock on September 12, 2015, 09:14:18 PM

Its a good reason to get the equipment, and then it will be there for the next job, no need to keep paying some one...

(And it will get you out of the house)   o:) o:)

Title: Re: Metal Polishing
Post by: Brian on September 13, 2015, 06:24:40 AM

Google is your friend 😊

Title: Re: Metal Polishing
Post by: Bill Held on September 13, 2015, 09:08:53 AM

Thanks Brian. They do call me Mr Google at home but personal recommendations are alway better recieved.
 :blu13

Title: Re: Metal Polishing
Post by: Tipsy on September 15, 2015, 11:57:54 AM

I actually have some buff wheels and compound etc to fit a drill
here in Vicky Point if you would like to borrow or do it here.
if you are interested pm me
Tipsy & Turvy

Title: Re: Metal Polishing
Post by: Bill Held on September 15, 2015, 01:02:11 PM

Many thanks Laurie,
I have put my additions into the hands of a Metal Polisher in Tingalpa.
Many thanks for your kind offer friend.
 :blu13

Title: Re: Metal Polishing
Post by: Abe on September 15, 2015, 09:00:56 PM

I use this:-

http://autosol.com.au/product/autosol-metal-polish/ (http://autosol.com.au/product/autosol-metal-polish/)

Title: Re: Metal Polishing
Post by: Bill Held on September 16, 2015, 06:30:25 AM

Many thanks Dave,
With health issues I have at the moment that Spanish fella, "Manual Labor", isn't on the menu.
But in saying that I have used Autosol many times and have found it to be a great product.
 :blu13