Author Topic: Airhawk or gel seat  (Read 2956 times)

Offline Sabie

  • Riding a Blue Angel
  • Supreme "2000" Club Member
  • *****
  • Posts: 2757
  • Thanked: 194 times
Airhawk or gel seat
« on: February 18, 2013, 08:56:47 PM »
Hi, I'm looking for a bit of comfort for the ride to SA for the rally.

Airhawk or a Gel Seat or is there is another recommendation?????

Thanks everyone....
(Sabie pronounced Sab bee)

2004 Honda ST1300 Blue (Current)
2007 Yamaha VStar XVS 650 Classic (Current)
2011 Suzuki Boulevard C50T VL 800
2007 Yamaha XV 250 Virago
1980 CX500 Red
1980 CX500 Black
1979 CX500 Blue
1981 Honda XL 500s
1982 Yamaha XZ 550
1981 Honda XL 250s
1974 Honda Elsinore MT 250
 

Offline Biggles

  • "Top Dog" 10000 club
  • *****
  • Posts: 14269
  • Thanked: 2769 times
  • Bridgeman Downs, Brisbane
Re: Airhawk or gel seat
« Reply #1 on: February 18, 2013, 09:12:49 PM »
I tried a gel seat and couldn't sell it quickly enough.  Airhawks have the advantage that you set the hardness.  I put mine under the sheepy.  It looks better and can't be pinched as easily (they're not cheap).  Protected from the elements there also.  I recall the gel seat from a local bike shop was about $40 dearer than I got the Airhawk for.
For the modern man who lives in the city, riding a bike might be one of the only ways to escape the humdrum monotony. To take off and ride. To be both at one with nature and one with the bike. To feel masculine. Adam Piggott

OzSTOC #16  STOC #6135  FarR #509  IBA #54927
 

Offline Sabie

  • Riding a Blue Angel
  • Supreme "2000" Club Member
  • *****
  • Posts: 2757
  • Thanked: 194 times
Re: Airhawk or gel seat
« Reply #2 on: February 18, 2013, 10:15:23 PM »
Thanks biggles... Looks like it might be the way to go..

I was planning to do the same thing an put it under the sheepy... :thumb
(Sabie pronounced Sab bee)

2004 Honda ST1300 Blue (Current)
2007 Yamaha VStar XVS 650 Classic (Current)
2011 Suzuki Boulevard C50T VL 800
2007 Yamaha XV 250 Virago
1980 CX500 Red
1980 CX500 Black
1979 CX500 Blue
1981 Honda XL 500s
1982 Yamaha XZ 550
1981 Honda XL 250s
1974 Honda Elsinore MT 250
 

Offline WendyL

  • Legendary "1000 Club" Member
  • *****
  • Posts: 1717
  • Thanked: 332 times
  • Extremely nice person, angelic even....
Re: Airhawk or gel seat
« Reply #3 on: February 18, 2013, 11:28:29 PM »
I haven't tried either on the bike, but have seen/used both as wheelchair cushions. I would definitely recommend the air hawk for pressure relief
:KissBlow
Wendy
2005 ST1300
FarRider #913
 

Online Marcus

  • Insert amusing quip here...
  • Supreme "2000" Club Member
  • *****
  • Posts: 3147
  • Thanked: 399 times
  • It says Stringo on my shirt
Re: Airhawk or gel seat
« Reply #4 on: February 19, 2013, 11:36:10 AM »
I use the airhawke, I love it, I have mine inflated alot, I know you're only suppose to have a small amount of air in it, but I get num bum if it's not inflated enough.
 

Offline Biggles

  • "Top Dog" 10000 club
  • *****
  • Posts: 14269
  • Thanked: 2769 times
  • Bridgeman Downs, Brisbane
Re: Airhawk or gel seat
« Reply #5 on: February 19, 2013, 11:44:43 AM »
I use the airhawke, I love it, I have mine inflated alot, I know you're only suppose to have a small amount of air in it, but I get num bum if it's not inflated enough.

The problem others have reported (and I experienced) with over-inflation is a tendency to move back and forward on the seat with acceleration and deceleration.

Might be related to the acreage of one's stern.   :think1   

Wot thuh   

:grin
For the modern man who lives in the city, riding a bike might be one of the only ways to escape the humdrum monotony. To take off and ride. To be both at one with nature and one with the bike. To feel masculine. Adam Piggott

OzSTOC #16  STOC #6135  FarR #509  IBA #54927
 

Offline alans1100

  • 1999 ST1100A
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6248
  • Thanked: 1161 times
  • Alan, Peterborough, SA
Re: Airhawk or gel seat
« Reply #6 on: February 19, 2013, 12:00:55 PM »
I bought the gel seat to replace my OEM which need recovering. Gel seat is better than OEM but we still make it a little more comfy with a goat skin seat cover. Home made but it works.
1999 :bl11  2004 :13Candy

FarRider #921- BR15, BR17, CR1

 

Online Marcus

  • Insert amusing quip here...
  • Supreme "2000" Club Member
  • *****
  • Posts: 3147
  • Thanked: 399 times
  • It says Stringo on my shirt
Re: Airhawk or gel seat
« Reply #7 on: February 19, 2013, 12:02:09 PM »
The problem others have reported (and I experienced) with over-inflation is a tendency to move back and forward on the seat with acceleration and deceleration.
Yeah I get that a bit when braking hard, but I've grown accustomed to it so no problems.