Looking For Help - what is this?

[mr2u]

Hi everyone,
just trying to work out my new Toy and im looking for help working out the buttons

Its a ST1300 PA 2006

what does the switch with   " * 1 2 3 " do ?
what does the switch with   /\ ( arrow pointing up ) do?   ..... im guessing it was spot lights?
what does the switch with    "On   Off"  do ??

Everything else i have worked out

Thanks in advance

[saaz]

The workings of the police switch block are the same as the ST1100.  Here is an explanation http://ozstoc.com/index.php?topic=2031.0

[Biggles]

Just looking at the corrosion on the bolt heads in that pic gives a clue to why your start switch was corroded.  The bike has obviously spent a lot of its life exposed to the elements.  (I assume that's what it is, and not white paint over-spray like on the switch block.)

[Brock]

That is a police switch block, and should be connected to a loom the ends under the back seat.

1 :-  Turns on strobes
2:-   Turns on the blue light on the extending pole at the rear
3 :-  Momentary on for siren
^ (or 4) :- Siren on
on Switch (5) ;_ Power on off for siren strobe package (Maybe radio as well)
7&8 Switch (the one that looks like a lighting switch):- Not used in Oz (I use it for spot light enable)

[mr2u]

Just looking at the corrosion on the bolt heads in that pic gives a clue to why your start switch was corroded.  The bike has obviously spent a lot of its life exposed to the elements.  (I assume that's what it is, and not white paint over-spray like on the switch block.)

Actually Biggles, the pic is a little miss leading as there is no over spray and really no corrosion either, it was something to do with the flash on the camera and using a HD filter/splitter. it merges two shots together to give a richer color depth than in normal photos, but as you can see, not so good for close ups with a flash.