« previous next »
Pages: [1]   Go Down

Author Topic: Starting problems  (Read 3313 times)

Offline Damien ball

  • Jr. Member
  • **
  • Posts: 97
  • Thanked: 30 times
  • ST Legend
Starting problems
« on: October 13, 2016, 06:07:35 PM »
Hi all having problems starting the 1100.
Turn the key dash lights up ok but push the start button and nothing. Wont happen all the time if i wiggle the engine cut off switch it starts but sometimes it takes a while. Today i had to clutch start it because after 20 min it still didn't start it clutch started fine. When i got home i turned it off and on a few times and it was all ok. Any ideas

Sent from my SM-N910G using Tapatalk

Logged


 

Offline Brock

  • Tardis Tech
  • UNBELIEVABLE "5000 Posts" Member
  • ***
  • Posts: 8962
  • Thanked: 1945 times
  • White is the fastest
Re: Starting problems
« Reply #1 on: October 13, 2016, 06:17:26 PM »
try putting in neutral with sidestand up.

Sometimes the sidestand switch plays up, sometimes its the clutch switch
Logged
Brock
Asian Correspondent
2003 Honda ST1100PY



Ulysses #32829
STOC #8239
OzSToc # ??
Kinross WA
 

alans1100

  • Guest
Re: Starting problems
« Reply #2 on: October 13, 2016, 07:34:32 PM »
Could also be some dirty contacts in the e-stop switch and/or the start switch

If you're having issue starting while in neutral it's more than likely a dirty contact in RH switch block

When starting in gear then more than likely it's clutch or side stand switch contacts. - also check to make sure the wires to the clutch and side stand switches are ok.

Process of elimination to find the fault.

Logged
 

Offline Damien ball

  • Jr. Member
  • **
  • Posts: 97
  • Thanked: 30 times
  • ST Legend
Re: Starting problems
« Reply #3 on: October 13, 2016, 07:44:46 PM »
Thanks for the response it is in neutral when the problem occurs so i will check it out over the weekend. :thumbs

Sent from my SM-N910G using Tapatalk

Logged
 

Offline johnnyYTED

  • Supreme "2000" Club Member
  • *****
  • Posts: 2257
  • Thanked: 866 times
  • STranger 1100 n BEEstY 1330cc
Re: Starting problems
« Reply #4 on: October 13, 2016, 08:02:31 PM »
 :dred11
Damien does it STart in neutral with the side STand up, my ST1100 :cop ex police had a side STand sensor problem and would only STart in neutral with the STand up...  ;-*
Logged
Picton  if it doesn’t flood higher than previous times.
mobile 047 4488 436 
IBA#59147, FarRider #732
STranger 1998 ST1100, x Police
STrangler ST1300 2007 Charcoal Grey.
BEEstY 2017 Can-Am Daytona 1330.
maybe something with a little extra
:dred11 :Spyder
 

Offline Damien ball

  • Jr. Member
  • **
  • Posts: 97
  • Thanked: 30 times
  • ST Legend
Re: Starting problems
« Reply #5 on: October 13, 2016, 08:51:47 PM »
Quote from: johnnyYTED on October 13, 2016, 08:02:31 PM
:dred11
Damien does it STart in neutral with the side STand up, my ST1100 :cop ex police had a side STand sensor problem and would only STart in neutral with the STand up...  ;-*
Hey johnnyYTED . Yeah it starts  in neutral with the side stand up or down. Also starts in gear with the side stand up when its running and i put the stand down the engine stops so i dont think it's the side stand sensor.

Sent from my SM-N910G using Tapatalk

Logged
 

Offline Brock

  • Tardis Tech
  • UNBELIEVABLE "5000 Posts" Member
  • ***
  • Posts: 8962
  • Thanked: 1945 times
  • White is the fastest
Re: Starting problems
« Reply #6 on: October 13, 2016, 09:07:24 PM »
Could be the clutch switch, or a dirty contact on the kill switch or starter button.

My bike plays up occasionally as well.
Logged
Brock
Asian Correspondent
2003 Honda ST1100PY



Ulysses #32829
STOC #8239
OzSToc # ??
Kinross WA
 
The following users thanked this post: Shiney

Offline Shiney

  • Dave
  • Global Moderator
  • UNBELIEVABLE "5000 Posts" Member
  • *****
  • Posts: 7095
  • Thanked: 2662 times
  • RTE Coordinator - Strathpine, QLD
Re: Starting problems
« Reply #7 on: October 13, 2016, 09:44:25 PM »
From what I've read, the most common problem that causes starting issues is a dirty contact on the kill switch or starter button (As suggested above :-++) .
So try cleaning them up first :thumb and if that doesn't fix it let us know.
Logged
My Ride: 2023 ST1800   :thumb
OzSTOC #104   STOC# 8512   IBA # 59142
Find me in The Who's Who of OzSTOC!

I like shiney things :grin
One of the Dave, Dave, Dave and Duncan crew 8)
 

Offline Damien ball

  • Jr. Member
  • **
  • Posts: 97
  • Thanked: 30 times
  • ST Legend
Re: Starting problems
« Reply #8 on: October 13, 2016, 09:55:00 PM »
Quote from: Shiney on October 13, 2016, 09:44:25 PM
From what I've read, the most common problem that causes starting issues is a dirty contact on the kill switch or starter button (As suggested above :-++) .
So try cleaning them up first :thumb and if that doesn't fix it let us know.
Thanks again for the help will let you all know how it go's.

Sent from my SM-N910G using Tapatalk

Logged
 
The following users thanked this post: Shiney

Offline Pezzz

  • Legendary "1000 Club" Member
  • *****
  • Posts: 1587
  • Thanked: 120 times
  • ST1100 Rider
Re: Starting problems
« Reply #9 on: October 14, 2016, 08:23:00 PM »
I've been having this issue for a year or so on mine but only when the bike has been run for a while. Yorkie had a look last weekend while I was away and although he couldn't get it to fault, cleaned the switch block contacts and did some wizardry with the starter relay. So far so good but only ridden it once since then. He also noted that my battery was made in 2005 so I'm getting a new one to see if that helps.

Sent from my SM-G930F using Tapatalk

Logged
Pezzz
:wht11
FarRider # 730
 

Offline Damien ball

  • Jr. Member
  • **
  • Posts: 97
  • Thanked: 30 times
  • ST Legend
Re: Starting problems
« Reply #10 on: October 15, 2016, 01:49:55 PM »
Quote from: Pezzz on October 14, 2016, 08:23:00 PM
I've been having this issue for a year or so on mine but only when the bike has been run for a while. Yorkie had a look last weekend while I was away and although he couldn't get it to fault, cleaned the switch block contacts and did some wizardry with the starter relay. So far so good but only ridden it once since then. He also noted that my battery was made in 2005 so I'm getting a new one to see if that helps.

Sent from my SM-G930F using Tapatalk
Yeah about the same all ways seems to happen when i stop for a bit and then try to restart. I have cleaned the contacts and so far so good.

Sent from my SM-N910G using Tapatalk

Logged
 

Offline Yorkie

  • Pit Crew & Recovery Specialist
  • Legendary "1000 Club" Member
  • *****
  • Posts: 1374
  • Thanked: 203 times
  • ST Legend
Re: Starting problems
« Reply #11 on: October 15, 2016, 09:38:35 PM »
When Pezzz dropped his ST off it hadn't been started for a week,I had to charge the battery first and then was unable to find a problem however I was starting it everyday
Logged
Brian 0418937173
Manager York Motor Museum

In the shed
1999 ST1100A
1971 CB750K2
1980 XV750
1977 GL1000
FR#720
CMRCWA #133
York,WA

So at what age does this "old enough to know better" kick in?
I believe in the "hereafter", every time I go to the shed I have to think "what am I here after"
 

Offline Frenchy

  • Newbie
  • *
  • Posts: 37
  • ST1100 - Australind WA
Re: Starting problems
« Reply #12 on: October 31, 2016, 12:05:06 AM »
Hi - Frenchy here, had the same issue now and then, removed side cover while pushing the start button tapped the start relay and away it went. Turned it off tried to start again no start - hold start button tap relay engine started. When I removed the relay connector I found the terminals were contaminated. I cleaned them up and have had no issues since - only a week so all good so far
Logged
Frenchy

Red ST1100PY
 
Pages: [1]   Go Up
« previous next »