Author Topic: Re: Good learner bike (Teelas Suprise) The OzSTOC Team Effort! (Read 124172 times)

Sabie · « **Reply #125 on:** July 08, 2013, 09:11:31 PM »

Courteous as to what Frarkles are going on her?

Streak · « **Reply #126 on:** July 08, 2013, 09:23:51 PM »

Quote from: Sabie on July 08, 2013, 09:11:31 PM

Courteous as to what Frarkles are going on her?

New Dark Tinted Screen with Purple Bolts
Givi TopBox with Twisted Throttle Rack (http://www.twistedthrottle.com/twisted-throttle-alu-rack-toprack-kawasaki-ninja-250-88-07)
Ram Mounts With X Grip (when we work out how the heck and where the heck we are going to put it)
Purple/Back Butterfly Tank Pad
12V Charging Plug (Once again Working out a location is going to be a trick)

Biggles · « **Reply #127 on:** July 08, 2013, 09:24:48 PM »

Quote from: Sabie on July 08, 2013, 09:11:31 PM

Courteous as to what Frarkles are going on her?

Honda badge
OzSTOC sticker
Vanity numberplate
Vase
Cosmetics bag
make-up mirror

Pocket STocker · « **Reply #128 on:** July 08, 2013, 09:30:01 PM »

Quote from: Biggles on July 08, 2013, 09:24:48 PM

Quote from: Sabie on July 08, 2013, 09:11:31 PM
Courteous as to what Frarkles are going on her?

Honda badge
OzSTOC sticker
Vanity numberplate
Vase
Cosmetics bag
make-up mirror

Yeah and what the problem is ????

Don't forget the changing room !!!!

Shiney · « **Reply #129 on:** July 09, 2013, 08:52:05 AM »

Quote from: Streak on July 08, 2013, 09:23:51 PM

Quote from: Sabie on July 08, 2013, 09:11:31 PM
Courteous as to what Frarkles are going on her?

New Dark Tinted Screen with Purple Bolts
Givi TopBox with Twisted Throttle Rack (http://www.twistedthrottle.com/twisted-throttle-alu-rack-toprack-kawasaki-ninja-250-88-07)
Ram Mounts With X Grip (when we work out how the heck and where the heck we are going to put it)
Purple/Back Butterfly Tank Pad
12V Charging Plug (Once again Working out a location is going to be a trick)

Ram Mounts With X Grip (when we work out how the heck and where the heck we are going to put it)
I would suggest getting a Brake/Clutch Reservoir Cover Mount from http://www.southerninsight.com.au/product.php?id_product=123

12V Charging Plug (Once again Working out a location is going to be a trick)
Isn't there a fairing pocket that it could be installed in?

Streak · « **Reply #130 on:** July 09, 2013, 10:17:02 AM »

Quote from: Shiney on July 09, 2013, 08:52:05 AM

Ram Mounts With X Grip (when we work out how the heck and where the heck we are going to put it)
I would suggest getting a Brake/Clutch Reservoir Cover Mount from http://www.southerninsight.com.au/product.php?id_product=123

I actually bought the mount that goes in the for stem hole of the bike, but fitting it is a problem, it does not seem to fit, even though it is rated to go into a ZZR 250

Shiney · « **Reply #131 on:** July 09, 2013, 01:38:15 PM »

That looks like it would work very well

If you can get it to fit

Bluey · « **Reply #132 on:** July 09, 2013, 04:23:27 PM »

Quote from: Streak on July 09, 2013, 10:17:02 AM

I actually bought the mount that goes in the for stem hole of the bike, but fitting it is a problem, it does not seem to fit, even though it is rated to go into a ZZR 250

I use one of these on my ST11 - you have to cut the rubber cone off at the right length and be sure to use the correct washer (several sizes supplied with it). Works well for me.

If anyone who has one didn't get the instructions (WHAT? - read the instructions!!!!), here is a link to them:

http://www.rammount.com/Portals/0/Skins/NationalProducts/pdf/ramb342uassemblyweb.pdf
They are self explanatory.

Of course, the bike must have a hole in the nut that holds the top triple clamp to the steering stem. I have removed the plastic housing from my ST11 bars because I have 30mm risers plus BMW R100RT handlebars - higher and further back, and the housing wouldn't fit without severe re-modelling.

http://spotonmotorcycles.com.au/oe-content/uploads/2012/08/061998ZZR250-4.jpg

This is supposed to be the picture from above, but it has inserted a link, not the pick - you'll know what I mean without inserting the pic again. I hope.

If this is the bike, then it won't fit without replacing the top yoke/ triple clamp nut. There are places that will sell replacement nuts that will do the job. Once you know the size, these people should be able to help out:

http://www.probolt-australia.com/aluminium/motorcycle-accessories.html?prodtype=516&thread_washer_dia=267

Anyone having trouble, I would encourage to follow the instructions step by step and follow the maxim "measure twice, cut once".

This is a uTube vid of the process:

https://www.youtube.com/watch?v=r1shNJby0aU

Hope this helps.

Bluey/Carl

Streak · « **Reply #133 on:** July 09, 2013, 09:45:09 PM »

Quote from: Bluey on July 09, 2013, 04:23:27 PM

I use one of these on my ST11 - you have to cut the rubber cone off at the right length and be sure to use the correct washer (several sizes supplied with it). Works well for me.

If anyone who has one didn't get the instructions (WHAT? - read the instructions!!!!), here is a link to them:

http://www.rammount.com/Portals/0/Skins/NationalProducts/pdf/ramb342uassemblyweb.pdf
They are self explanatory.

Of course, the bike must have a hole in the nut that holds the top triple clamp to the steering stem. I have removed the plastic housing from my ST11 bars because I have 30mm risers plus BMW R100RT handlebars - higher and further back, and the housing wouldn't fit without severe re-modelling.

http://spotonmotorcycles.com.au/oe-content/uploads/2012/08/061998ZZR250-4.jpg

This is supposed to be the picture from above, but it has inserted a link, not the pick - you'll know what I mean without inserting the pic again. I hope.

If this is the bike, then it won't fit without replacing the top yoke/ triple clamp nut. There are places that will sell replacement nuts that will do the job. Once you know the size, these people should be able to help out:

http://www.probolt-australia.com/aluminium/motorcycle-accessories.html?prodtype=516&thread_washer_dia=267

Anyone having trouble, I would encourage to follow the instructions step by step and follow the maxim "measure twice, cut once".

This is a uTube vid of the process:

https://www.youtube.com/watch?v=r1shNJby0aU

Hope this helps.

Bluey/Carl

Great info Bluey! it amazes me how much knowledge we have in this club with even the little things, I like the fact you can get new yoke nuts in Purple! Priceless!

Abe · « **Reply #134 on:** July 10, 2013, 08:10:07 AM »

Thanks for that photo "Shiney" (one of the Dave's and Duncan gang) of the steering yoke. As can been seen and is noted by Bluey the Ram mounted purchase WILL NOT fit this configuration. Also, the brake reservoir actually goes under the screen (close) when on full left lock. Thanks all for the input but the Ram mount is on the bottom of the "to do list" at this stage.

Off the spend Streaks money on oil, coolant, brake fluid and anything purple to accessorize the "Sports Demon".

I will try and post this photo later today, BUT, when I drained the oil out I noticed that in the rear of the viewing glass there is a rubber "o" ring half dislodged. It does appear to be part of the rubber ring that holds the viewing glass into the casing, if so, is this normal??? .

Cheers for now.

STeveo · « **Reply #135 on:** July 10, 2013, 08:15:02 AM »

I have seen those 'o' rings dislodged in the sight glass before, but if it is not leaking leave it alone as they can be a pain to replace and seal.

Abe · « **Reply #136 on:** July 10, 2013, 08:21:40 AM »

Thanks Steveo for the speedy reply, your spot on, its not leaking and I can see it would be a pain in the bum to replace.

Cheers

Streak · « **Reply #137 on:** July 10, 2013, 08:27:18 AM »

yep the Ram Mount can stay off the list mate, I am sure you have enough to do

wonder how many steak sandwichs are going on the expenses list....

Biggles · « **Reply #138 on:** July 10, 2013, 09:36:37 AM »

Quote from: Streak on July 10, 2013, 08:27:18 AM

yep the Ram Mount can stay off the list mate, I am sure you have enough to do

wonder how many steak sandwichs are going on the expenses list....

Just start saving and face the bill later.

Abe · « **Reply #139 on:** July 10, 2013, 09:55:06 AM »

Your right Biggles, start saving Streak, its amazing what you can buy for the Kawa that's compatible for the ST.

Sicman · « **Reply #140 on:** July 10, 2013, 10:25:01 AM »

Quote from: Streak on July 10, 2013, 08:27:18 AM

yep the Ram Mount can stay off the list mate, I am sure you have enough to do

wonder how many steak sandwichs are going on the expenses list....

Steak Sangers

I was picturing prawns, oysters balmain bugs, lobster

Wild Rose · « **Reply #141 on:** July 10, 2013, 10:52:44 AM »

Weis a famous Seafood Restaurant here in Toowoomba, all you can Eat sounds good

I will just check if Streak has made a booking yet

Sicman · « **Reply #142 on:** July 10, 2013, 11:27:56 AM »

Mmmm seaood, Great idea

ST2UP · « **Reply #143 on:** July 10, 2013, 12:02:31 PM »

Leave the Pootrol in Sydney Tony.....we will hire a coach with a towbar.....on Streaks account naturally will need at least 20 of us to deliver the parcel......Seafood will do the trick, now a cheeky little white to wash it all down......can see a Mastercard moment coming on......Pricless !!!!

Abe · « **Reply #144 on:** July 10, 2013, 03:34:26 PM »

OK a servicing up date before I shower and go to work:-

Engine oil and filter
Coolant flush and replaced
Replace fluid and bleed front brake
Replace fluid and bleed rear brake
Clean/paint radiator guard
Remove/clean/repack steering head bearings (39 ball bearing oh what fun)
Clutch cable lube
Clutch adjusted
Choke cable lube
Spark plugs cleaned/regapped
Air cleaner element cleaned/re-oiled
Fuel tank flushed (very clean, minimum floaties)
Photo evidence to follow.
Cheers
Dave

ST2UP · « **Reply #145 on:** July 10, 2013, 03:42:58 PM »

Love your work Dave, may have to bring mine down to you......is your fridge full and a can you have a roast on ???

Streak · « **Reply #146 on:** July 10, 2013, 03:49:10 PM »

Quote from: Abe on July 10, 2013, 03:34:26 PM

OK a servicing up date before I shower and go to work:-

Engine oil and filter
Coolant flush and replaced
Replace fluid and bleed front brake
Replace fluid and bleed rear brake
Clean/paint radiator guard
Remove/clean/repack steering head bearings (39 ball bearing oh what fun)
Clutch cable lube
Clutch adjusted
Choke cable lube
Spark plugs cleaned/regapped
Air cleaner element cleaned/re-oiled
Fuel tank flushed (very clean, minimum floaties)
Photo evidence to follow.
Cheers
Dave

Fantastic work mate, above and beyond the call of duty for sure!

Quote from: ST2UP on July 10, 2013, 03:42:58 PM

Love your work Dave, may have to bring mine down to you......is your fridge full and a can you have a roast on ???

Funny enough we where just discussing opening a bikeshop with a cafe attached to it

Abe · « **Reply #147 on:** July 10, 2013, 04:16:39 PM »

Wild Rose · « **Reply #148 on:** July 10, 2013, 04:26:06 PM »

Go Abe

Here is a man on a mission

sargent · « **Reply #149 on:** July 10, 2013, 04:50:35 PM »

Well done, Abe.
So when's the Grand Opening with Jumping Castle and Free Baloon rides

News:

Author Topic: Re: Good learner bike (Teelas Suprise) The OzSTOC Team Effort! (Read 124172 times)