« previous next »
Pages: [1]   Go Down

Author Topic: Mick-O-Pegs  (Read 3394 times)

Offline Sabie

  • Riding a Blue Angel
  • Supreme "2000" Club Member
  • *****
  • Posts: 2757
  • Thanked: 194 times
Mick-O-Pegs
« on: October 07, 2012, 09:33:31 PM »
Has anyone had anything to do with the Mick-O-Pegs for the ST's?

http://www.ridingiswonderful.com/page26.php

If so what's your experience or knowlwdge about them?

Hey, thanks
Logged
(Sabie pronounced Sab bee)

2004 Honda ST1300 Blue (Current)
2007 Yamaha VStar XVS 650 Classic (Current)
2011 Suzuki Boulevard C50T VL 800
2007 Yamaha XV 250 Virago
1980 CX500 Red
1980 CX500 Black
1979 CX500 Blue
1981 Honda XL 500s
1982 Yamaha XZ 550
1981 Honda XL 250s
1974 Honda Elsinore MT 250
 

Offline dougcthr

  • Newbie
  • *
  • Posts: 29
Re: Mick-O-Pegs
« Reply #1 on: October 07, 2012, 09:45:12 PM »
Guys,

I have the highway blades from www.motorcyclelarry.com.  Best thing I ever bought. I use them around town, in the mountains and up and down long boring highways...

Cannot give them a good enough rap. Approximately $250 plus postage and ten minutes to fit... They need to come off to remove the fairing and that is easy...

cheers,

Doug
Logged
Doug
AKA GoGo
 

Offline Nh478m

  • NH478M
  • Full Member
  • ***
  • Posts: 141
  • Farkled to death - well it was!
    • My '13
Re: Mick-O-Pegs
« Reply #2 on: October 22, 2012, 10:56:23 PM »
If you fit the MCL blades, you also get ready acces to the crash bar steelwork for safer, non seat damaging, tie down facility on trailers and ferries.
Logged
PJ
 

Offline dougcthr

  • Newbie
  • *
  • Posts: 29
Re: Mick-O-Pegs
« Reply #3 on: October 23, 2012, 06:17:47 AM »
PJ,

Although the aluminium fittings do take up most of the crash bar, removal and refitting of the blades is simplicity itself.  It literally take a minute with an Allen key and a 10mm spanner to remove them.

You need to remove them to remove the fairing so they are designed for this.

Happy to upload a pic or two if you would like to see how the fit...

Cheers,

Doug
Logged
Doug
AKA GoGo
 

Offline Nh478m

  • NH478M
  • Full Member
  • ***
  • Posts: 141
  • Farkled to death - well it was!
    • My '13
Re: Mick-O-Pegs
« Reply #4 on: October 23, 2012, 06:44:56 AM »
 :candystwheelieHi Doug,

I already have them fitted. I was just commenting that having the crash bar visible through the mcl supplied crash covers makes strapping the bike down a lot easier and faster. I always had problems tying the bike own easily and quickly till I fitted the mcl blades. It used to take me about 20 minutes. I don't think I could ride now without them ready use, brilliant bit of kit. Only issue for me was our post office slapping a customs fee on the mcl package before they'd let me collect it! Ned Kelly must be alive and well and working for our Post Office. :o) I did look at the Mick o pegs but decided they'd hang too close to the road in any kind of turn.

Cheers
« Last Edit: October 23, 2012, 06:46:43 AM by Nh478m »
Logged
PJ
 

Offline Tipsy

  • Landed Gentry
  • Legendary "1000 Club" Member
  • *****
  • Posts: 1347
  • Thanked: 53 times
  • Laurie
Re: Mick-O-Pegs
« Reply #5 on: October 23, 2012, 07:55:33 AM »
 :wht11 py

Tipsys' highway blades are just about done .

If you have an 1100 ex police then I have 2 sets available @ $150 a pair but you will have cut the covers to suit your self or send them to me.
Am very close to finishing design for standard 1100

1300 models 1st moulds have been made and now need to collect waste ally to make 1st attempt at pouring.

Tipsy
Logged
I am lost and haves gone to find myself
Now If I get back before I return
Please ask me to wait.
 
Pages: [1]   Go Up
« previous next »