OzSTOC

Honda ST1300 Section => Loan your ST1300 parts => Topic started by: ST2UP on October 25, 2014, 02:27:32 PM

Title: ST1300 rider foot pegs
Post by: ST2UP on October 25, 2014, 02:27:32 PM

Standard factory ST1300 pegs, Located Guyra NSW......

 :beer

Title: Re: ST1300 rider foot pegs
Post by: Biggles on October 25, 2014, 04:34:15 PM

Quote from: ST2UP on October 25, 2014, 02:27:32 PM

Standard factory ST1300 pegs, Located Guyra NSW......

So, what have you got now, stirrups?

Title: Re: ST1300 rider foot pegs
Post by: ST2UP on October 25, 2014, 04:48:25 PM

The std pegs where the first farkle replaced when we bought the 1300, took them off the 1100.....have had GL1800 Kuryakyn ISO pegs for the last 70,000 over 2 ST's.......even put them on the back with risers (look like stirrups  :Whipped) for the vertically challenged pilly  :whistle


The ISO pegs are just about 10mm lower than the std in foot position and wider, but dont have the crown nut so actually sit a little higher than the std's.....are adjustable for pitch so your foot sits flat on the pegs.


 :beer

Title: Re: ST1300 rider foot pegs
Post by: Marcus on October 25, 2014, 05:14:22 PM

Forces you to ride slower as you scrap sooner around bends