Author Topic: Installing Xenon H4 Bulbs (not HID) Honda ST1100  (Read 37168 times)

Offline harieg

  • Harie G
  • Legendary Member
  • *****
  • Posts: 781
  • Thanked: 1 times
  • ausSTie Brendale Qld.
    • www.aomm.net.au
Re: Installing Xenon H4 Bulbs (not HID) Honda ST1100
« Reply #50 on: June 01, 2012, 09:46:14 PM »
"A"
i have just redead the ebay link

it says they are HID     ????
ST1100 A Gold  1999 50 year anniversary OzSToc #169
ST1100 P Black 1996                            STOC #8037 verified
ST1300, Blue, 2004
CBR XX Super Blackbird 2006
 

Online Brock

  • Tardis Tech
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 8713
  • Thanked: 1692 times
  • White is the fastest
Re: Installing Xenon H4 Bulbs (not HID) Honda ST1100
« Reply #51 on: June 01, 2012, 09:52:44 PM »
They apparently have the same bluish tint that HID have H, and are not HID as such. so all you do is pop em in.
Brock
Asian Correspondent
2003 Honda ST1100PY



Ulysses #32829
STOC #8239
OzSToc # ??
Kinross WA
 

Offline scarp

  • Legendary Member
  • *****
  • Posts: 852
  • Thanked: 4 times
  • Huntingdale, Westralia
Re: Installing Xenon H4 Bulbs (not HID) Honda ST1100
« Reply #52 on: June 01, 2012, 09:55:04 PM »
They apparently have the same bluish tint that HID have H, and are not HID as such. so all you do is pop em in.
Well after you trim the lower tabs off that is :-)
FR# 431
IBA# 60317
 

Offline harieg

  • Harie G
  • Legendary Member
  • *****
  • Posts: 781
  • Thanked: 1 times
  • ausSTie Brendale Qld.
    • www.aomm.net.au
Re: Installing Xenon H4 Bulbs (not HID) Honda ST1100
« Reply #53 on: June 01, 2012, 11:15:07 PM »
ok
i had better buy 5 pairs
ST1100 A Gold  1999 50 year anniversary OzSToc #169
ST1100 P Black 1996                            STOC #8037 verified
ST1300, Blue, 2004
CBR XX Super Blackbird 2006
 

Offline alans1100

  • 1999 ST1100A
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6250
  • Thanked: 1161 times
  • Alan, Peterborough, SA
Re: Installing Xenon H4 Bulbs (not HID) Honda ST1100
« Reply #54 on: June 01, 2012, 11:18:06 PM »
"A"
did you get 2 blue tip
or
2 grey tip
or
1 of each

the site says they ship MIXED
so if i buy 5 pair (10) bulbs
i may be lucky and get even numbers

I got two grey tips but I believe you should get a pair of the same. He does sell them as a single item but the pair is cheaper.

It's says HID but they aren't and he would not be alone in the way they are described as well.
1999 :bl11  2004 :13Candy

FarRider #921- BR15, BR17, CR1

 

Offline harieg

  • Harie G
  • Legendary Member
  • *****
  • Posts: 781
  • Thanked: 1 times
  • ausSTie Brendale Qld.
    • www.aomm.net.au
Re: Installing Xenon H4 Bulbs (not HID) Honda ST1100
« Reply #55 on: June 02, 2012, 07:16:00 AM »
thanx again "A"
ST1100 A Gold  1999 50 year anniversary OzSToc #169
ST1100 P Black 1996                            STOC #8037 verified
ST1300, Blue, 2004
CBR XX Super Blackbird 2006
 

Offline Streak

  • NR2016 Group
  • Supreme "2000" Club Member
  • *
  • Posts: 4833
  • Thanked: 274 times
  • Stampy Glitterballs
    • Australian ST Owners Club
Re: Installing Xenon H4 Bulbs (not HID) Honda ST1100
« Reply #56 on: June 18, 2012, 10:35:09 PM »
I am really happy with the improvement of the bulbs, can't wait to add the Hella HID's as well and then I will be set for night riding!
Streak (Graham)
Storm Trooper
streak@ozstoc.com
Facebook: http://www.facebook.com/OzSTOC
2010 White DL650 Strom
FarRider #667
IBA #59145
Aussie Hard Arse #63
 

Offline harieg

  • Harie G
  • Legendary Member
  • *****
  • Posts: 781
  • Thanked: 1 times
  • ausSTie Brendale Qld.
    • www.aomm.net.au
Re: Installing Xenon H4 Bulbs (not HID) Honda ST1100
« Reply #57 on: July 13, 2012, 03:23:37 PM »
just purchased 5 sets of XENON'S from that Hong Kong link
now need an able bodied man to help me fit 1 pair to
1999 ST1100 A Gold 50th anniversary

any volunteers ????????????????
ST1100 A Gold  1999 50 year anniversary OzSToc #169
ST1100 P Black 1996                            STOC #8037 verified
ST1300, Blue, 2004
CBR XX Super Blackbird 2006
 

Offline Streak

  • NR2016 Group
  • Supreme "2000" Club Member
  • *
  • Posts: 4833
  • Thanked: 274 times
  • Stampy Glitterballs
    • Australian ST Owners Club
Re: Installing Xenon H4 Bulbs (not HID) Honda ST1100
« Reply #58 on: July 13, 2012, 03:25:57 PM »
just purchased 5 sets of XENON'S from that Hong Kong link
now need an able bodied man to help me fit 1 pair to
1999 ST1100 A Gold 50th anniversary

any volunteers ????????????????

Harie i am home with the kids toomorrow, and teela is working till 4 if you wanted to come down and i will give you a hand seeing i have just done this, i am sure we can bugger it all up together

only thing that might beat us is the weather...
« Last Edit: July 13, 2012, 03:32:53 PM by Streak »
Streak (Graham)
Storm Trooper
streak@ozstoc.com
Facebook: http://www.facebook.com/OzSTOC
2010 White DL650 Strom
FarRider #667
IBA #59145
Aussie Hard Arse #63
 

Offline harieg

  • Harie G
  • Legendary Member
  • *****
  • Posts: 781
  • Thanked: 1 times
  • ausSTie Brendale Qld.
    • www.aomm.net.au
Re: Installing Xenon H4 Bulbs (not HID) Honda ST1100
« Reply #59 on: July 13, 2012, 03:37:51 PM »
Thanx " G "
but i am flagging at Lakeside tomorrow
maybe i'll make the TREK next week
will keep in touch

also have spare rings and bulbs for use lots
at my cost ONLY
ST1100 A Gold  1999 50 year anniversary OzSToc #169
ST1100 P Black 1996                            STOC #8037 verified
ST1300, Blue, 2004
CBR XX Super Blackbird 2006
 

Offline Bikebear

  • Legendary Member
  • *****
  • Posts: 771
  • Thanked: 35 times
  • Livin' it up in FNQ..
Re: Installing Xenon H4 Bulbs (not HID) Honda ST1100
« Reply #60 on: July 15, 2012, 01:20:42 PM »
Just put the new H4 bulbs in, the first took a few minutes because working by feel can be a little complicated however the second took bugger all time since I knew what I was doing. All I have to do now is get a new tyre fitted and go for a ride at night to test them out.
Craig..
STOC #8215
UC #42145
SCA#2478

Gold '99 ST1100A (Golden Brown), Black '04 VT750, Red '15 1800 Valkyrie (Hildr), Black '08 DN01



"Golden Brown finer temptress, Never a frown with Golden Brown"
 

Offline harieg

  • Harie G
  • Legendary Member
  • *****
  • Posts: 781
  • Thanked: 1 times
  • ausSTie Brendale Qld.
    • www.aomm.net.au
Re: Installing Xenon H4 Bulbs (not HID) Honda ST1100
« Reply #61 on: July 15, 2012, 04:05:02 PM »
let me know " BB "
Shiney is going to fit a pair as well
did you use Streaks method ??
ST1100 A Gold  1999 50 year anniversary OzSToc #169
ST1100 P Black 1996                            STOC #8037 verified
ST1300, Blue, 2004
CBR XX Super Blackbird 2006
 

Offline Bikebear

  • Legendary Member
  • *****
  • Posts: 771
  • Thanked: 35 times
  • Livin' it up in FNQ..
Re: Installing Xenon H4 Bulbs (not HID) Honda ST1100
« Reply #62 on: July 15, 2012, 04:28:25 PM »
 | did it from underneath. Just checked Streaks pics and I see his bike doesn't have the big module above the lights mine has, my '99 doesn't have enough room to go from the top.

 Remove the black plastic panel under the front fairing, reach under and you can fairly easily get to the back of the lights. At the bottom of the rubber 'seal' that is on the back of the light there is a tab, grab this and pull back, this will let the rubber come off, feel for the spring clip that holds the bulb in, you'll need to push this clip towards the front and move it sideways to undo it. Once the bulb is free pull it out with the connector attached. Remove the connector from the bulb by pulling it, hold the bulb firmly as the connector is a tight fit. When replacing the bulb with a H4 using the adapter rings bend the small fingers at the bottom (where the cutout is) out slightly to keep the spacer from falling off, I also used pliers to squeeze the adapter and the bulb base together which made it one unit. Fit the bulb into the light housing first and put the clip back over, then fit the rubber seal and finally plug the connector on.

The clip can be a bit fiddly but once you've worked out one the second is easy.
« Last Edit: July 15, 2012, 04:35:40 PM by Bikebear »
Craig..
STOC #8215
UC #42145
SCA#2478

Gold '99 ST1100A (Golden Brown), Black '04 VT750, Red '15 1800 Valkyrie (Hildr), Black '08 DN01



"Golden Brown finer temptress, Never a frown with Golden Brown"
 

Offline harieg

  • Harie G
  • Legendary Member
  • *****
  • Posts: 781
  • Thanked: 1 times
  • ausSTie Brendale Qld.
    • www.aomm.net.au
Re: Installing Xenon H4 Bulbs (not HID) Honda ST1100
« Reply #63 on: July 15, 2012, 04:32:28 PM »
thanx

hey " G" is this the same as your method

"BB " any pics
ST1100 A Gold  1999 50 year anniversary OzSToc #169
ST1100 P Black 1996                            STOC #8037 verified
ST1300, Blue, 2004
CBR XX Super Blackbird 2006
 

Offline Bikebear

  • Legendary Member
  • *****
  • Posts: 771
  • Thanked: 35 times
  • Livin' it up in FNQ..
Re: Installing Xenon H4 Bulbs (not HID) Honda ST1100
« Reply #64 on: July 15, 2012, 04:41:18 PM »
No pics sorry. I really need to remember to take pics when I do stuff   >:()
Craig..
STOC #8215
UC #42145
SCA#2478

Gold '99 ST1100A (Golden Brown), Black '04 VT750, Red '15 1800 Valkyrie (Hildr), Black '08 DN01



"Golden Brown finer temptress, Never a frown with Golden Brown"
 

Offline alans1100

  • 1999 ST1100A
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6250
  • Thanked: 1161 times
  • Alan, Peterborough, SA
Re: Installing Xenon H4 Bulbs (not HID) Honda ST1100
« Reply #65 on: July 15, 2012, 05:25:57 PM »
| did it from underneath. Just checked Streaks pics and I see his bike doesn't have the big module above the lights mine has, my '99 doesn't have enough room to go from the top.

 Remove the black plastic panel under the front fairing, reach under and you can fairly easily get to the back of the lights. At the bottom of the rubber 'seal' that is on the back of the light there is a tab, grab this and pull back, this will let the rubber come off, feel for the spring clip that holds the bulb in, you'll need to push this clip towards the front and move it sideways to undo it. Once the bulb is free pull it out with the connector attached. Remove the connector from the bulb by pulling it, hold the bulb firmly as the connector is a tight fit. When replacing the bulb with a H4 using the adapter rings bend the small fingers at the bottom (where the cutout is) out slightly to keep the spacer from falling off, I also used pliers to squeeze the adapter and the bulb base together which made it one unit. Fit the bulb into the light housing first and put the clip back over, then fit the rubber seal and finally plug the connector on.

The clip can be a bit fiddly but once you've worked out one the second is easy.

That's the the easiest way for me to do it as well. But I pull the connector off the globe before I pull the rubber seal off. Gives you more room  when doing the spring clip.

Good tip about bending the lower globe locating tabs. My LH goes in as easy as but the RH spacer keeps falling off.

Wonder what's different between yours and mine apart from the colour and a badge or two as they are both '99 A models
1999 :bl11  2004 :13Candy

FarRider #921- BR15, BR17, CR1

 

Offline saaz

  • Supreme "2000" Club Member
  • *****
  • Posts: 4542
  • Thanked: 41 times
  • Canberra ACT
Re: Installing Xenon H4 Bulbs (not HID) Honda ST1100
« Reply #66 on: July 15, 2012, 05:41:28 PM »
Using a mirror works wonders in terms at looking how that spring clip works.
John
(Ridden on and forever in our hearts)
1996 Honda ST1100P
2014 Triumph Trophy SE
Ozstoc, STOC #7239, Farrider #461 Ulysses #061681, IBA #59143 and some others
 

Offline Bikebear

  • Legendary Member
  • *****
  • Posts: 771
  • Thanked: 35 times
  • Livin' it up in FNQ..
Re: Installing Xenon H4 Bulbs (not HID) Honda ST1100
« Reply #67 on: July 15, 2012, 06:40:00 PM »


That's the the easiest way for me to do it as well. But I pull the connector off the globe before I pull the rubber seal off. Gives you more room  when doing the spring clip.

Good tip about bending the lower globe locating tabs. My LH goes in as easy as but the RH spacer keeps falling off.

Wonder what's different between yours and mine apart from the colour and a badge or two as they are both '99 A models

The only difference is badging and the colour. I have heard that there were only 40 of the 50th anniversary gold models released in Australia by Honda in total so they are fairly uncommon.
Craig..
STOC #8215
UC #42145
SCA#2478

Gold '99 ST1100A (Golden Brown), Black '04 VT750, Red '15 1800 Valkyrie (Hildr), Black '08 DN01



"Golden Brown finer temptress, Never a frown with Golden Brown"
 

Offline Streak

  • NR2016 Group
  • Supreme "2000" Club Member
  • *
  • Posts: 4833
  • Thanked: 274 times
  • Stampy Glitterballs
    • Australian ST Owners Club
Re: Installing Xenon H4 Bulbs (not HID) Honda ST1100
« Reply #68 on: July 15, 2012, 10:19:24 PM »
Using a mirror works wonders in terms at looking how that spring clip works.

Agreed on that one! Was a great trick saaz
Streak (Graham)
Storm Trooper
streak@ozstoc.com
Facebook: http://www.facebook.com/OzSTOC
2010 White DL650 Strom
FarRider #667
IBA #59145
Aussie Hard Arse #63
 

Offline harieg

  • Harie G
  • Legendary Member
  • *****
  • Posts: 781
  • Thanked: 1 times
  • ausSTie Brendale Qld.
    • www.aomm.net.au
Re: Installing Xenon H4 Bulbs (not HID) Honda ST1100
« Reply #69 on: July 28, 2012, 10:49:03 PM »
" SO "
if you want the be all to end all on xenon globe fitting
you must get Shiney

he will add the text

here are the PIC's

does look good
will test and advise

http://s1050.photobucket.com/albums/s404/harieg/harieg%20garage%202/Xenon%20fitting%20Shiney%20n%20harieg/

or  ????

http://i1050.photobucket.com/albums/s404/harieg/harieg%20garage%202/Xenon%20fitting%20Shiney%20n%20harieg/IMAG0309.jpg
http://i1050.photobucket.com/albums/s404/harieg/harieg%20garage%202/Xenon%20fitting%20Shiney%20n%20harieg/IMAG0310.jpg
http://i1050.photobucket.com/albums/s404/harieg/harieg%20garage%202/Xenon%20fitting%20Shiney%20n%20harieg/IMAG0311.jpg
http://i1050.photobucket.com/albums/s404/harieg/harieg%20garage%202/Xenon%20fitting%20Shiney%20n%20harieg/IMAG0312.jpg
http://i1050.photobucket.com/albums/s404/harieg/harieg%20garage%202/Xenon%20fitting%20Shiney%20n%20harieg/IMAG0313.jpg
http://i1050.photobucket.com/albums/s404/harieg/harieg%20garage%202/Xenon%20fitting%20Shiney%20n%20harieg/IMAG0314.jpg
http://i1050.photobucket.com/albums/s404/harieg/harieg%20garage%202/Xenon%20fitting%20Shiney%20n%20harieg/IMAG0315.jpg
http://i1050.photobucket.com/albums/s404/harieg/harieg%20garage%202/Xenon%20fitting%20Shiney%20n%20harieg/IMAG0316.jpg
http://i1050.photobucket.com/albums/s404/harieg/harieg%20garage%202/Xenon%20fitting%20Shiney%20n%20harieg/IMAG0317.jpg
http://i1050.photobucket.com/albums/s404/harieg/harieg%20garage%202/Xenon%20fitting%20Shiney%20n%20harieg/IMAG0318.jpg
http://i1050.photobucket.com/albums/s404/harieg/harieg%20garage%202/Xenon%20fitting%20Shiney%20n%20harieg/IMAG0319.jpg
http://i1050.photobucket.com/albums/s404/harieg/harieg%20garage%202/Xenon%20fitting%20Shiney%20n%20harieg/IMAG0320.jpg
http://i1050.photobucket.com/albums/s404/harieg/harieg%20garage%202/Xenon%20fitting%20Shiney%20n%20harieg/IMAG0321.jpg
http://i1050.photobucket.com/albums/s404/harieg/harieg%20garage%202/Xenon%20fitting%20Shiney%20n%20harieg/IMAG0322.jpg
http://i1050.photobucket.com/albums/s404/harieg/harieg%20garage%202/Xenon%20fitting%20Shiney%20n%20harieg/IMAG0323.jpg
http://i1050.photobucket.com/albums/s404/harieg/harieg%20garage%202/Xenon%20fitting%20Shiney%20n%20harieg/IMAG0324.jpg

ST1100 A Gold  1999 50 year anniversary OzSToc #169
ST1100 P Black 1996                            STOC #8037 verified
ST1300, Blue, 2004
CBR XX Super Blackbird 2006
 

Online Shiney

  • Dave
  • Global Moderator
  • UNBELIEVABLE "5000 Posts" Member
  • *****
  • Posts: 6707
  • Thanked: 2319 times
  • RTE Coordinator - Strathpine, QLD
Re: Installing Xenon H4 Bulbs (not HID) Honda ST1100
« Reply #70 on: July 31, 2012, 08:39:59 AM »
I met up with Harieg on Saturday to change the light bulbs on his 1100 and my 1300 :blu13

I had previously changed the light bulbs on my old 1100 by turning the steering and reaching down past the dash next to the handlebars to access them, so I thought it would be easy, but as Harieg’s 1100 is an ABS model there are cables in the way on the right hand side :||||

So we decided the easiest way would be to access the area from underneath

Under the lights on the 1100 there was a plastic plate that was removed (held in with 2 screws) and after that it was relatively easy to reach the area.

Pulled the plug off the back of the bulb, then pulled the rubber boot off , then pushed in on the tension wire and moved it to the side releasing the pressure from the bulb.
At that point the bulb slides out. (Repeat for the other side)

For the 1300 it was essentially the same procedure except there wasn’t a plate under the lights to remove. (One of the plugs on my bike was a bit stuck and was a bitch to get out :cuss)

Next got out the new bulbs and snipped off the bottom two tabs, slipped the adapter ring on and squashed the base of the bulb and the ring together with pliers.

At this time the plate was found to be a bit loose :fp so… (At the bottom of the bulb there is a small cut out with 2 little tabs facing up) with the pliers, the tabs on the base of the bulb were bent onto the ring thereby holding it in place.

From here it was just putting it all back together
•   Slipped the bulbs into the light enclosure (feeling around the edge to make sure the tabs are sitting in the matching groves)
•   Pushed the tension wire over the bulb (push on the top of it and slide it to the side to lock it in place)
  Now for the rubber boot,
•   Placed a finger through the hole and held it up to the back of the bulb, felt the 3 prongs from the rear of the bulb and slid the boot on making sure the prongs came through the hole. Pushed around the edge of the boot to get it to sit in place.
•   Plugged the power plug on the bulb and replaced any bodywork that was removed.

Then coffee and a smoke, all done :grin
And there we go that was the light change experience at Harieg’s shop :thumb

Cheers
Shiney
« Last Edit: July 31, 2012, 08:41:56 AM by Shiney »
My Ride: 2023 ST1800   :thumb
OzSTOC #104   STOC# 8512   IBA # 59142
Find me in The Who's Who of OzSTOC!

I like shiney things :grin
One of the Dave, Dave, Dave and Duncan crew 8)
 

Offline harieg

  • Harie G
  • Legendary Member
  • *****
  • Posts: 781
  • Thanked: 1 times
  • ausSTie Brendale Qld.
    • www.aomm.net.au
Re: Installing Xenon H4 Bulbs (not HID) Honda ST1100
« Reply #71 on: July 31, 2012, 07:20:14 PM »
thanx Shiney  ((Dave)) an exceptional write up
no Carol to look over our shoulder

so that is why it " DID NOT " go as easy as he try's to make you believe

BUT the end result is just great
white light  yes it is not blue
but far and away better the the standard Honda yellow

again a BIG thanx to Shiney
i would have given up after trying to remove the rubber boot
ST1100 A Gold  1999 50 year anniversary OzSToc #169
ST1100 P Black 1996                            STOC #8037 verified
ST1300, Blue, 2004
CBR XX Super Blackbird 2006
 

Offline harieg

  • Harie G
  • Legendary Member
  • *****
  • Posts: 781
  • Thanked: 1 times
  • ausSTie Brendale Qld.
    • www.aomm.net.au
Re: Installing Xenon H4 Bulbs (not HID) Honda ST1100
« Reply #72 on: July 31, 2012, 07:22:30 PM »
AND it is my 2nd of three training days this weekend ((Sat.)) with the H.A.R.T.
and gold coast city council,

learning how to ride my ST1100
ST1100 A Gold  1999 50 year anniversary OzSToc #169
ST1100 P Black 1996                            STOC #8037 verified
ST1300, Blue, 2004
CBR XX Super Blackbird 2006
 

Online Shiney

  • Dave
  • Global Moderator
  • UNBELIEVABLE "5000 Posts" Member
  • *****
  • Posts: 6707
  • Thanked: 2319 times
  • RTE Coordinator - Strathpine, QLD
Re: Installing Xenon H4 Bulbs (not HID) Honda ST1100
« Reply #73 on: August 01, 2012, 06:07:42 AM »
thanx Shiney  ((Dave)) an exceptional write up
no Carol to look over our shoulder

so that is why it " DID NOT " go as easy as he try's to make you believe

BUT the end result is just great
white light  yes it is not blue
but far and away better the the standard Honda yellow

again a BIG thanx to Shiney
i would have given up after trying to remove the rubber boot

No worries mate, happy to help :thumbs

They are awesome, much better light :thumb :blu13

Cheers
Shiney
My Ride: 2023 ST1800   :thumb
OzSTOC #104   STOC# 8512   IBA # 59142
Find me in The Who's Who of OzSTOC!

I like shiney things :grin
One of the Dave, Dave, Dave and Duncan crew 8)
 

Offline WendyL

  • RTE Coordinator
  • Legendary "1000 Club" Member
  • *
  • Posts: 1703
  • Thanked: 307 times
  • Extremely nice person, angelic even....
Re: Installing Xenon H4 Bulbs (not HID) Honda ST1100
« Reply #74 on: October 24, 2012, 03:32:34 PM »
Thanks to the info on here, I just managed to change mty blown headlight bulb without too much trouble.

Thanks guys for being a mine of information  :thumb
:KissBlow
Wendy
2005 ST1300
FarRider #913