Author Topic: Wrecking my baby, bit by bit. Blue ST1100 ABS 2001 (Read 33397 times)

Shaun · « **Reply #100 on:** April 18, 2015, 02:06:01 PM »

Jglan10: Some of the ABS sensors have been removed from memory. As for the ABS unit itself, I still have both the front and rear modulator assemblies.

Brock: I still have the whole clutch assembly. Its removal may be beyond my levels of confidence however. I did read about KM's situation and I would be happy to help however I can.

alans1100 · « **Reply #101 on:** April 18, 2015, 02:09:08 PM »

Hi Shaun,

Do you still have the black plastic (has HONDA on it) that sits between the Headlight and windscreen? While I was doing the driving lights I noticed one of the tabs on mine was missing.

Shaun · « **Reply #102 on:** April 18, 2015, 02:18:10 PM »

alans1100: Do you mean this miraculously undamaged part?

alans1100 · « **Reply #103 on:** April 18, 2015, 02:31:12 PM »

Quote from: Shaun on April 18, 2015, 02:18:10 PM

alans1100: Do you mean this miraculously undamaged part?

Yes

Jglan10 (Onesie) · « **Reply #104 on:** April 18, 2015, 09:24:32 PM »

How much for the abs units

alans1100 · « **Reply #105 on:** April 18, 2015, 09:55:05 PM »

Quote from: alans1100 on April 18, 2015, 02:31:12 PM

Quote from: Shaun on April 18, 2015, 02:18:10 PM
alans1100: Do you mean this miraculously undamaged part?
Yes

I'll have it thanks. If you still have my address from the last time just pm the posted cost to me.

Shaun · « **Reply #106 on:** April 26, 2015, 01:57:40 PM »

Latest update:

Things gone so far:
- rear shock
- footrest pads
- LH pannier
- LH mirror
- lowered seat
- stock toolkit
- top box
- staintune pipes
- tank bag and tank cover
- HW pegs
- stock pipes
- 2x side fairings
- tank cover plastic
- GPS speedometer
- handlebar ends
- gear indicator
- air hose vent
- rear ABS sensor
- front ABS sensor
- handlebar risers
- radiator
- chromed side stand
- rear wheel and tyre
- front wheel and tyre
- 70A block fuse assembly
- left and right pannier brackets and latches
- rad guard radiator cover
- instrument panel covering and perspex/gasket
- black fairing spacer between screen and headlight
- side stand switch

Soon to be gone (auctions or negotiated):
- frame
- Oxford heated grips
- front and rear ABS modules
- right hand handlebar switch block
- Rear brake assembly

No good (disposed of)
- right hand side flare/peg mounts (crack)
- front right left tupperware
- right mirror and housing
- front forks
- front crash bar covers

Large scale - still up for grabs
- alternator
- final drive
- engine (have had some enquiries but nothing confirmed)
- clutch

Piet · « **Reply #107 on:** April 27, 2015, 11:52:07 PM »

Hi Shaun,

Just wondering if you still have the rear brake caliper bracket available for sale ... or even the bracket along with the caliper. If would you mind sending me a PM letting me know what you would like for bracket alone or bracket/caliper combination?

Thanks,
Piet

Shaun · « **Reply #108 on:** May 03, 2015, 05:27:58 PM »

PM sent. Entire assembly is available.

Made some minor edits to equipment post above.

Jglan10 (Onesie) · « **Reply #109 on:** May 03, 2015, 09:06:27 PM »

Shaun when do you want me to come and pickup the modules

Piet · « **Reply #110 on:** May 16, 2015, 10:05:24 PM »

Hi Shaun,

Do you still have the rear drive spline, the one with the 5 pins that inserts into the cush rubbers?
It is item 9 in the attached picture. If so how much do you want for it and what is the condition of the splines?
Piet.

Shaun · « **Reply #111 on:** July 25, 2015, 07:13:24 AM »

Quote from: Jglan10 (Onesie) on May 03, 2015, 09:06:27 PM

Shaun when do you want me to come and pickup the modules

Sorry Jglan, been off with the fairies lately :)

If you still need the bits, let me know and we can organise a pickup time.

Jglan10 (Onesie) · « **Reply #112 on:** July 25, 2015, 12:49:05 PM »

I'm looking after my sisters kids this weekend maybe during the week

Flash · « **Reply #113 on:** July 25, 2015, 07:06:29 PM »

Welcome back Shaun!
Still have the switch block? Lol

Shaun · « **Reply #114 on:** July 25, 2015, 07:27:50 PM »

Yeah mate, still have it. It's just been sitting in my small parts box, block and cabling.

I just found myself with some rare time this morning, and I was able to sort and clean around the area where my bike is. I am quite keen to get the rest of it moved on now :)

Shaun · « **Reply #115 on:** July 27, 2015, 03:00:24 PM »

Quick update:

Things gone so far:
- rear shock
- footrest pads
- LH pannier
- LH mirror
- lowered seat
- stock toolkit
- top box
- staintune pipes
- tank bag and tank cover
- HW pegs
- stock pipes
- 2x side fairings
- tank cover plastic
- GPS speedometer
- handlebar ends
- gear indicator
- air hose vent
- rear ABS sensor
- front ABS sensor
- handlebar risers
- radiator
- chromed side stand
- rear wheel and tyre
- front wheel and tyre
- 70A block fuse assembly
- left and right pannier brackets and latches
- rad guard radiator cover
- instrument panel covering and perspex/gasket
- black fairing spacer between screen and headlight
- side stand switch
- right hand handlebar switch block
- front and rear ABS modules

Soon to be gone (auctions or negotiated):
- frame
- Oxford heated grips
- Rear brake assembly
- Fuel tank

No good (disposed of)
- right hand side flare/peg mounts (crack)
- front right left tupperware
- right mirror and housing
- front forks
- front crash bar covers

Large scale - still up for grabs
- alternator
- final drive
- engine (have had some enquiries but nothing confirmed)
- clutch

Pezzz · « **Reply #116 on:** August 07, 2015, 12:38:15 AM »

Hi Shaun, do you have any pictures of the splines on the final drive?

Shaun · « **Reply #117 on:** August 07, 2015, 04:06:37 PM »

Pezzz:
I haven't got that far no, sorry.

Shaun · « **Reply #118 on:** November 01, 2015, 05:12:32 PM »

Ok guys, I have bitten the bullet and I am listing the remains (the large bits, engine, frame, swingarm etc) of the bike on ebay.

Let me know if any of you are desperate for any of those things. :)

Shaun · « **Reply #119 on:** November 07, 2015, 03:30:19 PM »

Oh and sorry Reuben, I was going to ring you during the holidays about dismembering the rest of the bike, but on the last Friday of term, I managed to do a grade 2 tear of my left calf. Playing a staff vs students game.

Only just really started coming good.

welsh_youngblood · « **Reply #120 on:** November 07, 2015, 08:52:52 PM »

Ok, newbie question. I'll try my luck. What condition is the fuel tank that's not a fuel tank but you still put petrol in bit like?

Sent from my SM-G920I using Tapatalk

Brock · « **Reply #121 on:** November 07, 2015, 09:12:23 PM »

I think you mean the bit thats called the shelter, The plastic cover, with the fuel filler cover flap.

Shaun · « **Reply #122 on:** November 07, 2015, 09:13:59 PM »

welsh_youngblood: If you mean the plastic tank cover that houses the fuel inlet flap, then that is gone, sorry.

johnnyYTED · « **Reply #123 on:** November 08, 2015, 11:43:52 AM »

here's one on fleabay welsh-youngblood
http://www.ebay.com.au/itm/Honda-ST-1100-99-tank-cover-shell-/271986656161?hash=item3f53ab03a1
hope its STill there. its not to far from me in Camden NSW..

Jglan10 (Onesie) · « **Reply #124 on:** November 08, 2015, 06:59:20 PM »

If the buyer dose not pick up I will take it forgot to bid

News:

Author Topic: Wrecking my baby, bit by bit. Blue ST1100 ABS 2001 (Read 33397 times)