Honda ST1100 Section > Electrics & Electronics - Volts, Amps and Fuses ST1100

LED lightbar install

(1/1)

Andrew_02ST:
Hi all,

Just thought I'd share my LED lightbar install.

I'm looking to start commuting to work a bit more on the ST which means leaving for work in the dark, and with a 95km commute means I want better lighting than the standalone headlamp.

I had a Kings LED number plate mount light bar sitting around and mounted it under the headlamp using the existing screws and used a piggy back adaptor to pick up the high beam off the headlamp globe.

I like the lightbar option over individual lights mounted either side under the mirrors etc.

( I tidied up the power lead - the photos were taken prior to final fitment )

Looks like the bike now has a moustache!

Andrew_02ST:
Another photo

Andrew_02ST:
And one more.

Shiney:
Looks like it should provide a fair bit of moustache light :thumb

If you get a chance, can you show a photo of the light it throws down the road with just low beam and another with the moustache lit up for comparison?

It should be interesting :thumbs

Cheers
Shiney
 

Biggles:
Hooley Dooley!  That's a lot of light!  Although my two spotties total 14 LEDs, so not much difference.

Navigation

[0] Message Index