Honda ST1300 Section > Suspension ST1300

front suspension

(1/1)

redrider:
Hi there. I,m doing an oil change on the forks , replacing top bushes and seal kit. on pulling the forks down with oem springs and spacers taken out the original oil level was 45mm. I thought it would have been 63mm as per manual specs. This is the bikes first fork oil change. also can the springs have a couple of spacers put in just to stiffen them up a tad.? bike has done 95000ks ,had it since new. 2004 model         thanks for any input  Regards Brian

STeveo:
Hi Brian, better to fit some new springs from someone like Ikon just up the road in Albury. I use 10wt oil in mine for a little firmer dampening (Standard is 7.5wt).

 :bl11

Navigation

[0] Message Index