How do I connect GME 3500 to Sena SR10?

[bloodbikes]

Does anyone know how I connect my gme 3500 to an Sena SR10, I have then connector lead with 4 wires, do I have to cut the microphone plug off and re wire it, and do I need a jack plug so I can hear the conversation so using my helmet speakers as extension speakers.
Basically looking for a wiring diagram, am using the headlight pass switch as a ptt button.

 

[ST2UP]

Brock has done this exact install using a Tx3500.....he will be along soon 


Until then have a read of this ----> http://ozstoc.com/index.php?topic=4519.0




Cheers

[Brock]

I have the parts needed at home with me Peter, and the tools and diagrams as well

[Turtle]

I can say he is good at making them 

Oh we have to swap one day Brock

Turtle

[Wombat]

Bloodbikes
A few of us have done the same thing but into a Uniden 7700. All posted on here. I have a seperate lead you can try. It uses two wires from the normal PTT lead in the front and a second speaker lead from the aux jack in the rear. Yorkie has run a patch lead internal to have all four wires into the front which looks a lot better.
Give us a call or PM   
Wombat

 

[bloodbikes]

A big thank you to Brock for making my lead up.

 

[Turtle]

He is good at those sena leads now 

Turtle

[blackduck]

I have the parts needed at home with me Peter, and the tools and diagrams as well

Brock
from todays outing Im assured you are the doyen all things electrikery
definatley a subject out of the league of this simple marine engineer
my next job is the UHF, ive got the senna hub and the blank patch lead but not the radio
do you work your magic with uniden sets aswell as GME
if so is the 8010 a viable option
http://www.uniden.com.au/australia/p_uh8010nb_ant_index.asp
if you can make me up the patch lead ill order the radio and forever be in your debt
or just say the word and ill get the GME

[Brock]

I havent done one for the Uniden, so dont have the pin out for the plug, but I'm sure Yorkie does and will post it shortly. It doesnt take long to make, just need a bit of wire and a plug for the audio out.

[DaleMcLean]

I have pinouts for just about all of them 
Also the connectors for the radios and the tools to put them on 

BUT i do need to charge for them as its a business (I'm trying to stay afloat)

[Pezzz]

I have the parts needed at home with me Peter, and the tools and diagrams as well

Brock
from todays outing Im assured you are the doyen all things electrikery
definatley a subject out of the league of this simple marine engineer
my next job is the UHF, ive got the senna hub and the blank patch lead but not the radio
do you work your magic with uniden sets aswell as GME
if so is the 8010 a viable option
http://www.uniden.com.au/australia/p_uh8010nb_ant_index.asp
if you can make me up the patch lead ill order the radio and forever be in your debt
or just say the word and ill get the GME

The below is the radio that Yorkie, Wombat, and I have.
If you already have the blank Sena cable then have a chat with Yorkie as he did mine in such a way that there is only 1 cable and the speaker works as well :-)

[Yorkie]

Stu, You can order the radio, I will need it and the lead for about 15 mins and you will be good to go.
A good excuse for a ride to York.

[blackduck]

Stu, You can order the radio, I will need it and the lead for about 15 mins and you will be good to go.
A good excuse for a ride to York.

your a wonderful human being Brian
there may be a nighthood in this for you

Ill get onto evil bay and start the ball rolling

[Pezzz]

Not sure I actually posted the link. lol ... prestige communications. Look for uniden 7700nb.

Sent from my GT-I9507 using Tapatalk

[Brock]

Better to get the radio from Presige or Dale, at least then you have a waranty (until you open it and change things.)

[Pezzz]

Trina bought mine on eBay. It came from Prestige which is 10km from where I live. When I saw the receipt I laughed. Then went back to them for aerial and sr10 direct.

Sent from my GT-I9507 using Tapatalk

[Turtle]

And if you get to Yorkies this week we you can test it on the Turtles Shakedown to Williams 

Turtle

[Pezzz]

Love your style ....

Sent from my GT-I9507 using Tapatalk

[blackduck]

should be here by end of the week
have to figure out a time after that
thanks once again
youll have to let me know your poison
ill get pezz to get you a bottle for fitting his heated grips
 

[Pezzz]

Hahaha  ... hang on .. wait .. What the? ??

Sent from my GT-I9507 using Tapatalk

[blackduck]

radio arrived today
its the size of the palm of my hand
will be manufacturing a double aerial mount this week to make it go faster
will tee something up with you brian or bring the bits to williams on sunday - pick up whenever

[Yorkie]

You will also need a ground independent antenna.

[blackduck]

came with the radio
my am / fm radio antenna is actually a uhf aswell
but 2 antenna look quicker than 1

[blackduck]

A huge thanks to Yorkie for dancing his nimble fingers over my UHF patch lead
the 4 hour turn around ride from rockingham to York and back for what was 15 minutes work was enjoyable to say the least
lovely weather unlike the forecast tomorrow

He also fits heated hand grips
 
Vote 1 - Yorkie elevated to god like satus

cheers brian

[Yorkie]

A huge thanks to Yorkie for dancing his nimble fingers over my UHF patch lead
the 4 hour turn around ride from rockingham to York and back for what was 15 minutes work was enjoyable to say the least
lovely weather unlike the forecast tomorrow

He also fits heated hand grips
 
Vote 1 - Yorkie elevated to god like satus

cheers brian

Thanks Stu, it is all part of the service we offer.