OzSTOC

General Category => General Discussion => Topic started by: philf on October 15, 2018, 01:01:30 PM

Title: Motor Cycle Larry highway blades
Post by: philf on October 15, 2018, 01:01:30 PM

G'day, ive recently bought a 2005 ST1300. I know it has been a past topic and I know Larry died a little while back now. Whilst his website still exists no one responds to enquiries to the web site. Does anyone know where I might be able to buy a set of highway blades from?

Title: Re: Motor Cycle Larry highway blades
Post by: Shillas on October 15, 2018, 01:06:28 PM

Try this topic out from Alan the other day:

http://ozstoc.com/index.php?topic=13029.msg1244574#msg1244574 (http://ozstoc.com/index.php?topic=13029.msg1244574#msg1244574)

Title: Re: Motor Cycle Larry highway blades
Post by: Shillas on October 15, 2018, 01:07:12 PM

Oh, and welcome aboard. You'll enjoy the site and the advice you can get.

Title: Re: Motor Cycle Larry highway blades
Post by: StinkyPete on October 15, 2018, 01:44:58 PM

Hi philf and welcome to OzSTOC, the source of any and all information about your ST.   :hatwave

The MCL Highway Pegs are pretty well impossible to find, either new or second hand, and Alans1100's post refered to by Shillas is probably your best option if you are loking for highway blades.  Gone-Cruising in QLD did make some enquiries about getting copies of the MCL blades fabricated, but the fabricators he spoke with could not replicate some of the complex curves on their machines.

Title: Re: Motor Cycle Larry highway blades
Post by: philf on October 15, 2018, 01:52:29 PM

Thank you for the assist re the Blades - the PSR-USA website has taken my order, they are making a limited run and look like shipping mid to late December. Fingers crossed. Thanks again and much appreciated.

Title: Re: Motor Cycle Larry highway blades
Post by: CallMeSteve on October 15, 2018, 02:00:56 PM

Quote from: StinkyPete on October 15, 2018, 01:44:58 PM

Hi philf and welcome to OzSTOC, the source of any and all information about your ST.   :hatwave

The MCL Highway Pegs are pretty well impossible to find, either new or second hand, and Alans1100's post refered to by Shillas is probably your best option if you are loking for highway blades.  CallMeSteve in QLD did make some enquiries about getting copies of the MCL blades fabricated, but the fabricators he spoke with could not replicate some of the complex curves on their machines.

"Not I said the fly".   Must have been someone else who likes to be called 'Steve'.

Title: Re: Motor Cycle Larry highway blades
Post by: StinkyPete on October 15, 2018, 04:04:44 PM

Quote from: CallMeSteve on October 15, 2018, 02:00:56 PM

"Not I said the fly".   Must have been someone else who likes to be called 'Steve'.

Sorry Steve...  :fp   It was "gone-cruising".  I don't know how your name bobbed up in my addled mind??   :o
I've corrected my original post.

Title: Re: Motor Cycle Larry highway blades
Post by: gone-cruising on October 19, 2018, 09:04:56 PM

Pete,
They call it old timers lol, we've all got it HaHaHa
and Callmesteve I'm the other Steve that sold you the tip-over bars. lol
Cheers Steve  :13Candy

Title: Re: Motor Cycle Larry highway blades
Post by: CallMeSteve on October 20, 2018, 08:16:10 AM

One thing I’ve learned in life... Steves are like lasagna and good coffee.  You can never have too many of them. ++

Title: Re: Motor Cycle Larry highway blades
Post by: Biggles on October 20, 2018, 09:30:59 AM

Quote from: CallMeSteve on October 20, 2018, 08:16:10 AM

One thing I’ve learned in life... Steves are like lasagna and good coffee.  You can never have too many of them. ++

Wish I could say the same about  "bills".      :'(

Title: Re: Motor Cycle Larry highway blades
Post by: CallMeSteve on October 20, 2018, 09:32:16 AM

 :rofl

Title: Re: Motor Cycle Larry highway blades
Post by: Shiney on October 20, 2018, 03:21:58 PM

Quote from: Biggles on October 20, 2018, 09:30:59 AM

Quote from: CallMeSteve on October 20, 2018, 08:16:10 AM

One thing I’ve learned in life... Steves are like lasagna and good coffee.  You can never have too many of them. ++

Wish I could say the same about  "bills".      :'(

 :crackup :rofl :crackup :rofl :crackup :rofl :crackup :rofl :crackup :rofl

    :clap   :clap   :clap   :clap   :clap

Title: Re: Motor Cycle Larry highway blades
Post by: Bodø on October 20, 2018, 04:56:49 PM

 :rofl

Title: Re: Motor Cycle Larry highway blades
Post by: Gadget on October 20, 2018, 06:04:40 PM

 :crackup :rofl :crackup :rofl :crackup :rofl :crackup :rofl :crackup :rofl

:clap   :clap   :clap   :clap   :clap

Sent from my SM-G930F using Tapatalk