OzSTOC
Honda ST1100 Section => Plastic, Fairings, Panniers and Top Box's 1100 => Topic started by: Tipsy on September 10, 2014, 12:27:48 PM
-
:wht11 py
Hey all I am converting my Rhonda back to duel seat and require the foot pegs & frame for each side,
I know this is not a common request so should be a few sets around the traps
also the 1100 duck tail minus tail light
+ dual seat
and right hand mirror cover of any colour.
have single seat and fittings to trade.
seat modded but sits a little to low in front.(more padding needed to lift up)
Tipsy
-
I'll dig out what I have in the shed and see what I've got that I won't be using on my project bike.
-
Tipsy,
I have a dual seat, I don't have any rear footpegs, I have the tailsection with the tailight still in it but it does have a crack in it (I don't understand why this would be required as it stays on the bike when the conversion is done, or at least it did on mine). Not sure what you mean by frames for each side, if you are talking about the big alloy bit that the footpegs are mounted on, I have the ones from my project bike which still have the rear mounts on them. If yours no longer have the rear mounts I'd be happy to swap them as I will be cutting them down for the project bike. I only have one mirror but no mirror cover.
Let me know if you need anything.
-
Ok mate will do swap for the large alloy frame as mine have the foot pegs cut off.
yes to seat please , do you want my single with all attachments.
my duck tail unit has been cut to suit more open space in rear single seat cover which has a lid assembly made in it..
I will keep hunting for the mirror cover if the covering of it does not work.
Tipsy
-
Got your number bloke.. I'll give you a call tomorrow. I would take the single seat as it will work on my project bike.