Author Topic: Carb Sync ... Adj Screw location?  (Read 3136 times)

Offline Piet

  • Sr. Member
  • ****
  • Posts: 278
  • Thanked: 27 times
  • Caroline Springs, Victoria.
Carb Sync ... Adj Screw location?
« on: January 15, 2021, 08:33:57 PM »
Hi all,  I am wanting to synchronise the carbs and in preparation I am wanting to know where everything is etc.
The problem I have is that I can’t see the adjustment screws. 

I have looked in the manual and I sure think I am looking in the right place on the bike, that is, the between the two vacuum chamber covers.  Yet I just can’t see them.  Do I have to remove the air filter box to gain access? 

I would not have thought so because I imagine the adjustments would be best made in as close to operational config rather than the air box not being in place potentially affecting the adjustment in some way.

Rides:
ST1100P 2004 Darkside
VTX1800C 2008 V&H pipes (sold)
 

Online Brock

  • Tardis Tech
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 8793
  • Thanked: 1763 times
  • White is the fastest
Re: Carb Sync ... Adj Screw location?
« Reply #1 on: January 15, 2021, 10:14:41 PM »
Brock
Asian Correspondent
2003 Honda ST1100PY



Ulysses #32829
STOC #8239
OzSToc # ??
Kinross WA
 
The following users thanked this post: ruSTynutz

Offline Abe

  • Legendary "1000 Club" Member
  • *****
  • Posts: 1797
  • Thanked: 178 times
  • 4D Gang Member
At my age " getting lucky" is remembering what I came in the room for ;)

:wht13      Cheers Dave
Member of the 4 D Gang
 
The following users thanked this post: Biggles, Wild Rose

Offline StinkyPete

  • Defected to a BMW
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6579
  • Thanked: 3009 times
  • Blackwood, SA
IBA #59146   OzLapper 2012 & 2019

BSA M21 600cc single (1948)
Yamaha XS650  (The Black Wobbler)
Yamaha XJR1300 (Rocket Ship)
Honda ST1300 (Beautiful Bike)
BMW R1200RT (Technically Perfect)
 
The following users thanked this post: Biggles

Offline Biggles

  • "Top Dog" 10000 club
  • *****
  • Posts: 14121
  • Thanked: 2564 times
  • Bridgeman Downs, Brisbane
Re: Carb Sync ... Adj Screw location?
« Reply #4 on: January 17, 2021, 11:26:51 AM »
Welcome back Abe.  It's great to see you around again.   :thumb

Agreed.  And it looks like he hasn't aged a day!
For the modern man who lives in the city, riding a bike might be one of the only ways to escape the humdrum monotony. To take off and ride. To be both at one with nature and one with the bike. To feel masculine. Adam Piggott

OzSTOC #16  STOC #6135  FarR #509  IBA #54927
 

Offline Piet

  • Sr. Member
  • ****
  • Posts: 278
  • Thanked: 27 times
  • Caroline Springs, Victoria.
Answered - Carb Sync ... Adj Screw location?
« Reply #5 on: January 17, 2021, 01:28:45 PM »
I have worked it out.  The Honda manual makes it hard. Very hard.

This first picture is taken from the manual.  Please note:  The images in the manual are up-side down.
The adjustment screws are shown Top-side ... the vacuum hose that Tee's between the two carbs is down side.  In real life its the other way up.

https://www.imghostr.net/image/RYmIL

Now please see the two photo's of the bike.

Right hand side
https://www.imghostr.net/image/RYjaB

Left hand side
https://www.imghostr.net/image/RYles

Instead of looking into the carbs you have to be looking down.

I hope this helps anyone else wanting to synchronize their carby's.

An yes it's a hell of a lot easier if you remove the airbox completely. 
(I wish I knew how to imbed the images rather than links, but at the moment this is the best I can do)

« Last Edit: January 17, 2021, 01:51:20 PM by Piet »
Rides:
ST1100P 2004 Darkside
VTX1800C 2008 V&H pipes (sold)
 
The following users thanked this post: ruSTynutz

Online ruSTynutz

  • NR2024 Rally Team
  • Supreme "2000" Club Member
  • *
  • Posts: 4974
  • Thanked: 3055 times
Re: Carb Sync ... Adj Screw location?
« Reply #6 on: January 17, 2021, 02:53:56 PM »
(I wish I knew how to imbed the images rather than links, but at the moment this is the best I can do)

It's actually easy...
you just need to click on "Embed Codes", go to "BBCode" under "Full Image", place cursor over the link and then select "copy".
Then paste link into your post...

You should end up with:







Hope that helps...  :thumbsup


        2005 Honda ST1300A
 

Offline Piet

  • Sr. Member
  • ****
  • Posts: 278
  • Thanked: 27 times
  • Caroline Springs, Victoria.
Re: Carb Sync ... Adj Screw location?
« Reply #7 on: January 17, 2021, 07:16:19 PM »
Thanks very much ruSTynutz,  I will try it with my next post.

Rides:
ST1100P 2004 Darkside
VTX1800C 2008 V&H pipes (sold)
 
The following users thanked this post: ruSTynutz