ST1100 Highway Blades/wings

[Tipsy]

  py

I presume that you have a standard 1100 not a police version.
standard comes with brackets,
Police models just bolt on.

Tipsy

[STutter]

Yeah just a regular PY model.

[Tipsy]

  py

 

Tipsy

[STutter]

Dang, now I'm going to have to check.

I coulda sworn it was a PY, but now I need to check. Its obviously been resprayed then.

I have the fairings off currently and I was actually asking myself yesterday why there were a few connections that had loose ends.

Looks like I might have a po-po in disguise! Which is great because I might now be able to pimp it out with all those accessory brackets etc

[Brock]

If there is a cluster of plugs under the seat, and a fancy switch block on the right grip that does nothing except start and stop the bike, the you indeed have a PY model.

PY is the designation of the stock standard Police model

[STutter]

Yeah PY model ahoy. The switchblock looks pretty dull looking. Probably something missing.

This bike is a funny one. The calipers were painted red at some point, then sprayed black.

The list goes on 

[harieg]

Yeh   but we just say    "  P  "  !!!!!!

[Tipsy]

  py
If the tip over frames have a plate with 3 threaded holes in them then its py or the tip over frame have been replaced,

Tipsy

[STutter]

Yeah its definately a PY model. The sticker says so, and there are the extra electrical connections and the tipover wings have three holes in them.

Looks like Stutter is an undercover officer. Its probably had a hard life, but still goes, so I'm happy :)

[Tipsy]

  py
Cool .. another one into the fold and very easy to mount the wings

Tipsy

[STutter]

Hey guys, I know its an old thread, but do you still offer the wings?

[harieg]

yes
with a few small questions
police or non police
tipsy has been a bit crook and a bit quiet
i am not sure if he has any more blades    ask him

new burnt blades are not a problem
i also think he has made a small mod. to the design

ask him also

[STutter]

Well its a PY model, but there is only one bolt hole on the frame bits. Tackleberry came and had a look at it the other day and he reckons its a police, but without most of the gear that would make it police. May never had made it into service or something.

I'll check with tipsy too

[harieg]

how long have you had it
some were new never sold from honda warehouse
didnt make it to police service
tipsys has 2 holes
1300 36 93 93

[STutter]

Its a 2000 model and I've only had it for about 2 or 3 years. Bought it off ebay from the gold coast. I'll give you a buzz

[Old Steve]

The PY model has a bigger engine cover/wing, I mistakenly ordered a smaller right hand civilian cover.  The cover/wing I have is free to a good home to anyone prepared to ride to meet me or pay for postage.

See ST1100, fairings etc.

[alans1100]

The PY model has a bigger engine cover/wing, I mistakenly ordered a smaller right hand civilian cover.  The cover/wing I have is free to a good home to anyone prepared to ride to meet me or pay for postage.

See ST1100, fairings etc.

They should be the same as part numbers are the same except for the 1990 to 1994 models. There were two part numbers for each side in 1995 as there was a colour variation (different shade of grey) that year on S and AS models. The PS (1995) only had the newer shade which continued until the end of the P model in 2003. The 1996 models onwards all had the newer shade of grey. The only difference is the colour so they should fit all models from 1995 onwards.

The RH wing was changed in 1995 on all models as well which needed a different wing cover from that year.

Item 21 and 22 all show the same part number for 2000 models but is the same for 1996 onwards.

http://www.st-1100.com/st1100-parts-fiche-fairing-st1100py.html

http://www.st-1100.com/st1100-parts-fiche-fairing-st1100ay.html

http://www.st-1100.com/st1100-parts-fiche-fairing-st1100y.html

The only way anyone could get the wrong cover for the RH side is if you order for a P model but that on its own means a 1993 1100 as the police version is PP that year.

The part your giving away will only fit 1990 to 1994 models if the information on this site is correct.

[alans1100]

The PY model has a bigger engine cover/wing, I mistakenly ordered a smaller right hand civilian cover.  The cover/wing I have is free to a good home to anyone prepared to ride to meet me or pay for postage.

See ST1100, fairings etc.

They should be the same as part numbers are the same except for the 1990 to 1994 models. There were two part numbers for each side in 1995 as there was a colour variation (different shade of grey) that year on S and AS models. The PS (1995) only had the newer shade which continued until the end of the P model in 2003. The 1996 models onwards all had the newer shade of grey. The only difference is the colour so they should fit all models from 1995 onwards.

The RH wing was changed in 1995 on all models as well which needed a different wing cover from that year.

Item 21 and 22 all show the same part number for 2000 models but is the same for 1996 onwards.

http://www.st-1100.com/st1100-parts-fiche-fairing-st1100py.html

http://www.st-1100.com/st1100-parts-fiche-fairing-st1100ay.html

http://www.st-1100.com/st1100-parts-fiche-fairing-st1100y.html

The only way anyone could get the wrong cover for the RH side is if you order for a P model but that on its own means a 1993 1100 as the police version is PP that year.

The part your giving away will only fit 1990 to 1994 models if the information on this site is correct.

I have looked at this a bit more in relation to this post http://ozstoc.com/index.php?topic=5149.msg56705#msg56705

It seems Mr Honda threw a spanner in the works.

The basic colour for the wing covers and the belly pan is Gusto Grey on all models however in 1995 another colour Fur Grey was also available as above on 1100S and 1100AS models. 1995 also saw a design change in the RH crash bar which resulted in a modified RH wing cover.

Going to 1996 or 1100T and 1100AT we get another shade of grey called Glen Grey. So it looks like that in 1995/6 you got a different shade of grey depending on the body colour.

[Streak]

Just to add into this conversation about ST1100 highway blades, I have started a conversation with a fellow who has the bellow highway pegs in the USA, I will keep everyone updated with what unfolds, but it looks promising and interesting!

[Wombat]

To add confusion to the tale on what model do the wing covers fit. Honda tried to sell me those with the bottom recessed but mine are standard. My STead is a Model PY
Another thing I think Tipsys look better so are you making or have you any available Tipsy

 

[Streak]

To add confusion to the tale on what model do the wing covers fit. Honda tried to sell me those with the bottom recessed but mine are standard. My STead is a Model PY
Another thing I think Tipsys look better so are you making or have you any available Tipsy

 

I have tried tipsys blades, they where excellent but I am too short in the leg for them, so I passed them onto someone else 

[alans1100]

I have tried tipsys blades, they where excellent but I am too short in the leg for them, so I passed them onto someone else 

Sometimes I'll place my heel on the wing while I'm riding just to straighten the leg out for a minute or two and I can only just get to the rear of the wing so I doubt if I bought any of these I'd be able to reach them.