Awesome work Gary, it looks brilliant
I do have one question though…
Did you attach some connecters on the wires between the bike and the pocket like on the red and white wires in the following pic?
This way the wires can be disconnected when the faring needs to be removed
I ask because when I first did mine I didn't
I added them later when I needed to remove the faring
Cheers
Shiney
Short answer Sort of?
The power goes directly to the switch on a spade terminal (easily removed if necessary, not necessarily so easily replaced) and the earth goes to the switch as well
BUT I've made the mistake of joining the earth wire from the bike and the earth wire on the pocket at spade terminal that goes to the the switch (which makes electrical sense, but not fairing removing sense
), so it looks like next weekend, I'm doing a similar (and very sensible) mod.
Good thing I've got my own crimping tool and very good advice from a friend
Thanks again for the heads up.
Cheers,
Gary