Author Topic: Ex police bike/ throttle hold? (Read 6433 times)

Copernicus d ferret · « **on:** July 05, 2016, 06:44:54 PM »

Hi, I've hab an st in the past and loved it. Just got a 1999 ex police bike, wondering if the lever on the right thumb is throttle hold, if no how do I decrease the resistance of the throttle to stay on ?
Thanks
Dave

Brock · « **Reply #1 on:** July 05, 2016, 07:20:58 PM »

Gday Dave,
Welcome to the site.

A picture of the offending fitting would help, the Police Switch block doesnt come with a throttle friction lever.

Copernicus d ferret · « **Reply #2 on:** July 05, 2016, 07:47:39 PM »

Pic of the right controls.
Thank Brock for being my first help.
Hate to tell you there's a lot I what to do to this bike that I'm going to need help with. Money dependent of cause.

Copernicus d ferret · « **Reply #3 on:** July 05, 2016, 07:58:02 PM »

If it's not a friction lever how do I get the throttle to rotate freely ?

Brock · « **Reply #4 on:** July 05, 2016, 08:15:04 PM »

Flip the lever up, and it will reduce friction. There should be a grub screw in the fitting opposite the knob. The device is a cheap after market throttle lock, it should be easy to remove if you dont want it.

There is a ton of advice available, for upgrading your ST and how to use the switch cluster.

Copernicus d ferret · « **Reply #5 on:** July 05, 2016, 08:20:40 PM »

Brock,
You may be able to help on another matter.
How do I join up with Ulysses, I'm 46.

Brock · « **Reply #6 on:** July 05, 2016, 08:35:08 PM »

just click on this link, and it will take you to the Ulysses Inc website, there is a join button . Click on that fill the info, and send a copy of your licence (and pay the fee) and you are done.

You could also see where the local branch meets, go along to a meeting ( you may find that it isnt for you, it happens sometimes), they Committee can help you out.

Where are you located.??

Copernicus d ferret · « **Reply #7 on:** July 05, 2016, 08:36:52 PM »

Thanks on the throttle hold bit.

Brock · « **Reply #8 on:** July 05, 2016, 08:37:16 PM »

Copernicus d ferret · « **Reply #9 on:** July 05, 2016, 08:38:19 PM »

Taree nsw

Copernicus d ferret · « **Reply #10 on:** July 05, 2016, 08:39:28 PM »

Is 1100py the police mod ?
My bike is a 1999 but when I look up parts it's a 2000 1100py ?

Brock · « **Reply #11 on:** July 05, 2016, 08:46:55 PM »

PY is the police model, can be confirmed by the volt meter on the left of the dash, the headlight adjust knob that usually lives there is under the right engine maintenance cover. The speedo is also calibrated in 2K increments. It may also be a solo seat version.

alans1100 · « **Reply #12 on:** July 05, 2016, 08:51:58 PM »

Quote from: Copernicus d ferret on July 05, 2016, 08:39:28 PM

Is 1100py the police mod ?
My bike is a 1999 but when I look up parts it's a 2000py ?

2000 is the model year which is what the Y also means on your Police version. The previous Police would have been a PT or 1996 model.

The VIN plate should have the month and year of manufacture.

Copernicus d ferret · « **Reply #13 on:** July 05, 2016, 09:05:38 PM »

Yes speedo matches, volt meter matches, headlight adjust is on right fairing.
Could you direct me to the best page to fit a power socket/charging plug location?
Please.

Copernicus d ferret · « **Reply #14 on:** July 05, 2016, 09:19:56 PM »

Throttle hold removed, bit of the old wd40 and all is good.
Thank you.

Brock · « **Reply #15 on:** July 05, 2016, 09:23:18 PM »

I dont recall a particular page, its a simple task.

You need to work out where you want the socket (Merit/BMW or cigarette or both). Its then a matter of running a cable with an inline fuse from the battery to the socket.

Try to keep the wiring neat, and tucked away from anything that can pinch.

Copernicus d ferret · « **Reply #16 on:** July 05, 2016, 09:24:51 PM »

Thanks alans1100.

Copernicus d ferret · « **Reply #17 on:** July 05, 2016, 09:32:07 PM »

Hi Brock,
Just thought there might have been a constant 12v near the left fairing inner cover.
Thanks Brock.

Brock · « **Reply #18 on:** July 05, 2016, 09:39:11 PM »

The closest power is the battery, its on the left, just behind you leg under the side cover. It where I have my socket wired, I use a 15 amp fuse, as the compressor takes a bit of power. never use a compressor without the engine running, you wont start the bike if you do.

Copernicus d ferret · « **Reply #19 on:** July 05, 2016, 09:45:01 PM »

Yeh got the cover off and the battery charging. Just hoped there would be a closer pickup point.
Thanks heaps for your help, going to bed now hope to chat again. The same goes for you alans1100.
Thanks to you both, so glad I joined this chat. Night.
Dave.

Brock · « **Reply #20 on:** July 05, 2016, 09:47:40 PM »

Copernicus d ferret · « **Reply #21 on:** July 05, 2016, 09:48:30 PM »

Brock could you please send me a pic of your setup for reference. Might be the better way. Thanks.

Copernicus d ferret · « **Reply #22 on:** July 05, 2016, 09:50:36 PM »

Ok I'll have one with you, just because you twisted my arm. And I'm not riding tonight.

Brock · « **Reply #23 on:** July 05, 2016, 09:57:24 PM »

It will have to wait till the weekend, its dark and cold out. Not that there is much to see, as everything is tucked away. I also tend to use Honda plugs to connect everything as it makes taking panels off a bit easier.

I am an aero electrician by trade, so I like my wiring as neat as I can get it. No soldering and covering with tape.

Copernicus d ferret · « **Reply #24 on:** July 05, 2016, 10:07:28 PM »

Nice, I'm ex telecom, box stitched cables and all joins heat shrinked.
Must admit with the new bike he told me the brake like in the guvi box blew a fuse each time it was plugged in. I did cheat and cover the breaks in the insulation with hot glue.
Who leaves shap points on a solder joint ?

News:

Author Topic: Ex police bike/ throttle hold? (Read 6433 times)