Author Topic: Farkle Mounting Options  (Read 4454 times)

Offline basadia

  • Full Member
  • ***
  • Posts: 153
  • Thanked: 12 times
  • ST Legend
Farkle Mounting Options
« on: August 07, 2016, 05:04:43 PM »
Anyone found a solution to the mounting bracket when you have Oxford heated grips and McCruise control? If you have a look at the attached photo both use the top bolt on the clutch reservoir and I'm not sure of a better way to have both mounted.
The only option I've come up with is making a new bracket with offset bolts on the Oxford switch but there is a bit of work in making up a new bracket especially when I'd like it to look somewhat factory fitted.
cheers
Keith
Keith
05 ST1300
 

Online StinkyPete

  • Defected to a BMW
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6579
  • Thanked: 3009 times
  • Blackwood, SA
Re: Farkle Mounting Options
« Reply #1 on: August 07, 2016, 05:08:59 PM »
I'd weld a bit of flat onto the side of the oxford bracket, flush the joint and drill two new holes.   With a bit of careful welding you could fill the two original holes, flush them off, and paint the "new" bracket black.   If done well, it would not look makeshift.  If you aren't confident, post it me and I'll do it for you.

Another alternative would be to get some sheet stainless and cut it to the new dimensions.
IBA #59146   OzLapper 2012 & 2019

BSA M21 600cc single (1948)
Yamaha XS650  (The Black Wobbler)
Yamaha XJR1300 (Rocket Ship)
Honda ST1300 (Beautiful Bike)
BMW R1200RT (Technically Perfect)
 

Offline basadia

  • Full Member
  • ***
  • Posts: 153
  • Thanked: 12 times
  • ST Legend
Re: Farkle Mounting Options
« Reply #2 on: August 07, 2016, 05:14:15 PM »
I'd think the best option would be to make a new bracket as I don't have the equipment to weld it up. Stainless from memory is not easy to work with as it is very hard but would give the best finish and be very durable.
Keith
05 ST1300
 

Online StinkyPete

  • Defected to a BMW
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6579
  • Thanked: 3009 times
  • Blackwood, SA
Re: Farkle Mounting Options
« Reply #3 on: August 07, 2016, 05:25:41 PM »
I'd think the best option would be to make a new bracket as I don't have the equipment to weld it up. Stainless from memory is not easy to work with as it is very hard but would give the best finish and be very durable.


I agree.   For a small bracket, stainless can be easily cut with a hacksaw, and drilled with nice sharp drill bits.    See  http://ozstoc.com/index.php?topic=10745.msg1197742#msg1197742   for the new SS bracket I made for my Spot.
IBA #59146   OzLapper 2012 & 2019

BSA M21 600cc single (1948)
Yamaha XS650  (The Black Wobbler)
Yamaha XJR1300 (Rocket Ship)
Honda ST1300 (Beautiful Bike)
BMW R1200RT (Technically Perfect)
 

Offline basadia

  • Full Member
  • ***
  • Posts: 153
  • Thanked: 12 times
  • ST Legend
Re: Farkle Mounting Options
« Reply #4 on: August 07, 2016, 05:35:53 PM »
Very nice job mate, not sure I could do as good a job but I might find a small sheet of stainless and have a go.
How do you find having your GPS mounted in that spot? The old Aldi GPS I got with my bike was mounted there and it was a PITA getting the key in and out.
Keith
05 ST1300
 

Offline Brian

  • Legendary "1000 Club" Member
  • *****
  • Posts: 1674
  • Thanked: 302 times
  • ST Immortal
Re: Farkle Mounting Options
« Reply #5 on: August 07, 2016, 05:39:11 PM »
I've utilised the Oxford bracket for my tunes and just grabbed a strip of Stainless ,cut,shaped,drilled a couple of hole and sprayed satin black where needed....Cheers Brian
I jus wanna ride my bike

09 ST1300 Charcoal Metallic (Grey GhoST)
09 ST1300 Candy Glory Red (Red MiST)
 

Online StinkyPete

  • Defected to a BMW
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6579
  • Thanked: 3009 times
  • Blackwood, SA
Re: Farkle Mounting Options
« Reply #6 on: August 07, 2016, 05:56:09 PM »
Very nice job mate, not sure I could do as good a job but I might find a small sheet of stainless and have a go.
How do you find having your GPS mounted in that spot? The old Aldi GPS I got with my bike was mounted there and it was a PITA getting the key in and out.

The key is a bit awkward, but I've become accustomed to it.   I like to keep my line of vision clear and don't like to have stuff intruding above the dash.
IBA #59146   OzLapper 2012 & 2019

BSA M21 600cc single (1948)
Yamaha XS650  (The Black Wobbler)
Yamaha XJR1300 (Rocket Ship)
Honda ST1300 (Beautiful Bike)
BMW R1200RT (Technically Perfect)
 

Offline basadia

  • Full Member
  • ***
  • Posts: 153
  • Thanked: 12 times
  • ST Legend
Re: Farkle Mounting Options
« Reply #7 on: August 07, 2016, 08:41:33 PM »
Thanks Brian, what's the red push switch under your left grip next to your blinker switch?

I've utilised the Oxford bracket for my tunes and just grabbed a strip of Stainless ,cut,shaped,drilled a couple of hole and sprayed satin black where needed....Cheers Brian
Keith
05 ST1300
 

Offline Gadget

  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 5614
  • Thanked: 2141 times
  • Just Ridin'
Re: Farkle Mounting Options
« Reply #8 on: August 08, 2016, 04:49:03 AM »
I can't be sure, but it looks like a bit of the red object in the background creating an optical illusion.

sent using Tapatalk

Cheers,
Gary
_________________________________________________________________________________________________________
Then  :blu13 Now :Spyder
Life's too short to be miserable, so enjoy it! :)
OzSTOC #257
FarRider #810
IBA #59140

Mob: 04 2448 3555
 

Offline Brian

  • Legendary "1000 Club" Member
  • *****
  • Posts: 1674
  • Thanked: 302 times
  • ST Immortal
Re: Farkle Mounting Options
« Reply #9 on: August 08, 2016, 05:53:18 AM »
Thanks Brian, what's the red push switch under your left grip next to your blinker switch?

I've utilised the Oxford bracket for my tunes and just grabbed a strip of Stainless ,cut,shaped,drilled a couple of hole and sprayed satin black where needed....Cheers Brian




That's the PTT (Press To Talk) button to use with uhf radio that would normally sit in cradle on the right bar
I jus wanna ride my bike

09 ST1300 Charcoal Metallic (Grey GhoST)
09 ST1300 Candy Glory Red (Red MiST)
 

Offline STroppy

  • STroppy (Terry - the name on the TeeShirt)
  • RTE Coordinator
  • Legendary "1000 Club" Member
  • *
  • Posts: 1884
  • Thanked: 751 times
  • CountryMember! Mob 0412499625
Re: Farkle Mounting Options
« Reply #10 on: August 09, 2016, 06:23:39 PM »
I just moved the grip heater control to the throttle side, just used the mount plate that came with the grips, but had to bend it on existing bend line but back the other way . . I'll take a foto tomorrow . . bike in bowels of very cold garage.

You'll see what bend is required when you move the control . . it was easy to bend and move as the leads were long enough to just reroute to the throttle side.  Because one is not constantly changing the heater setting, having it on the throttle side is no big problem, especially as you have cruise control.
Terry, Canberra 0412499625
Ulysses #22354,
Current bikes 2013 Triumph Trophy SE, 2008 ST1300, BMW F700GS
Previous bikes1948 Triumph Tiger 500 Twin - sprung rear hub, 1963 BSA Bantam 175, Yamaha 75cc & DT250, Honda ST1100, 400N & CX500 sports, BMW K100RS & K100 LT, Harley Electra-glid