Author Topic: More Metal Work Projects  (Read 6619 times)

Offline StinkyPete

  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6587
  • Thanked: 3015 times
  • Blackwood, SA
More Metal Work Projects
« on: February 01, 2017, 02:27:31 PM »
Here's a small wood-oven/cooker/hot smoker that I've recently made from an old 9kg gas bottle.  We're still testing it to work out the best coal bed size, and cooking time etc.
IBA #59146   OzLapper 2012 & 2019

Yamaha AS1
BSA M21 600cc single (1948)
Yamaha XS650  (The Black Wobbler)
Yamaha XJR1300 (Rocket Ship)
Honda ST1300 (Beautiful Bike)
BMW R1200RT (Technically Perfect)
Currently Bikeless
 
The following users thanked this post: Shiney, Lionel, Jdbiker

Offline Jdbiker

  • NR2024 Rally Team
  • Supreme "2000" Club Member
  • *
  • Posts: 3279
  • Thanked: 1604 times
  • ST Legend
Re: More Metal Work Projects
« Reply #1 on: February 01, 2017, 03:08:11 PM »
 :like
Jdbiker.
2008 red ST1300A
1980 Yamaha XS 1100
1974. Yamaha TX 500 sold
1984   Kawasaki GT 750
1975  Honda GL1000

Honda XL 250 sold
Suzuki TS 100
2000 Honda ST1100P
1988 Enfield Bullet 350
 1941 Royal Enfield WD/C 350 engine
2021 Royal Enfield Bullet 500
2024 Honda Transalp
 

Offline richo

  • Richo
  • Legendary Member
  • *****
  • Posts: 960
  • Thanked: 394 times
  • ST 2009
Re: More Metal Work Projects
« Reply #2 on: February 01, 2017, 05:37:30 PM »
Very neat looking camp oven.   Well done
Richo
 

Offline johnnyYTED

  • Supreme "2000" Club Member
  • *****
  • Posts: 2240
  • Thanked: 841 times
  • STranger 1100 n BEEstY 1330cc
Re: More Metal Work Projects
« Reply #3 on: February 01, 2017, 09:51:40 PM »
 :dred11
wow Pete, pretty dam smick lQQking cooker there,     :think1 could you do a onesie size with 45kg bottle.  :grin ;-*
Picton  if it doesn’t flood higher than previous times.
mobile 047 4488 436 
IBA#59147, FarRider #732
STranger 1998 ST1100, x Police
STrangler ST1300 2007 Charcoal Grey.
BEEstY 2017 Can-Am Daytona 1330.
maybe something with a little extra
:dred11 :Spyder
 

Offline StinkyPete

  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6587
  • Thanked: 3015 times
  • Blackwood, SA
Re: More Metal Work Projects
« Reply #4 on: February 04, 2017, 11:06:48 AM »
I saw this in an old metal working book, and made it many year ago.   I've fitted a metal cutting disk to one side of a bench grinder, with a rest that can be moved back and forth as the disk wears.   It's extremely handy for making small rough cuts, and slots in thin material and so on.  I tend not to use it for material over about 3mm thick.
IBA #59146   OzLapper 2012 & 2019

Yamaha AS1
BSA M21 600cc single (1948)
Yamaha XS650  (The Black Wobbler)
Yamaha XJR1300 (Rocket Ship)
Honda ST1300 (Beautiful Bike)
BMW R1200RT (Technically Perfect)
Currently Bikeless
 

Offline StinkyPete

  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6587
  • Thanked: 3015 times
  • Blackwood, SA
Re: More Metal Work Projects
« Reply #5 on: July 07, 2017, 03:09:26 PM »
Here's my latest project, which is a birthday gift for my daughter.     It's a back yard fire pit made from a 16 inch steel rim and a smaller rim, but with a swing over BBQ grill.  The chain is purely for decoration.
IBA #59146   OzLapper 2012 & 2019

Yamaha AS1
BSA M21 600cc single (1948)
Yamaha XS650  (The Black Wobbler)
Yamaha XJR1300 (Rocket Ship)
Honda ST1300 (Beautiful Bike)
BMW R1200RT (Technically Perfect)
Currently Bikeless
 
The following users thanked this post: Shiney, Lionel, ST1100_GREG

Offline ST2UP

  • The Pockey Poker ;)
  • Administrator
  • UNBELIEVABLE "5000 Posts" Member
  • *****
  • Posts: 5620
  • Thanked: 1341 times
  • Guyra - NSW
Re: More Metal Work Projects
« Reply #6 on: July 07, 2017, 04:37:06 PM »
Nice job....

You have inspired me to throw up a couple of my camp cooking creations when i get home  :grin

 :beer
Chris    



IBA #64116   FarRider #660   Ulysses #56339

st2up@ozstoc.com

Mbl: 0428792425

Sighted it....Wanted it...Chucked a fit...GOT IT !!!!
 

Offline Gadget

  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 5627
  • Thanked: 2146 times
  • Just Ridin'
Re: More Metal Work Projects
« Reply #7 on: July 07, 2017, 04:42:40 PM »
Nice job....

You have inspired me to throw up a couple of my camp cooking creations when i get home  :grin

 :beer
Don't throw up, it gets messy and smells. :stirpot :grin

Sent from my SM-G930F using Tapatalk

Cheers,
Gary
_________________________________________________________________________________________________________
Then  :blu13 Now :Spyder
Life's too short to be miserable, so enjoy it! :)
OzSTOC #257
FarRider #810
IBA #59140

Mob: 04 2448 3555
 

Offline ST2UP

  • The Pockey Poker ;)
  • Administrator
  • UNBELIEVABLE "5000 Posts" Member
  • *****
  • Posts: 5620
  • Thanked: 1341 times
  • Guyra - NSW
Re: More Metal Work Projects
« Reply #8 on: July 07, 2017, 09:12:55 PM »
Here is my home made flat pack fire pit....

Folds flat and interlocks together....just 5 bits plus the tent pegs to sit the billy, pan or BBQ plate on. All fits in a canvas bag.

Great for when you want a fire and no pit exists.....sticks with the "tread lightly" outdoors theme  :like

Chris    



IBA #64116   FarRider #660   Ulysses #56339

st2up@ozstoc.com

Mbl: 0428792425

Sighted it....Wanted it...Chucked a fit...GOT IT !!!!
 
The following users thanked this post: Shiney, Lionel, ST1100_GREG

Offline Gadget

  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 5627
  • Thanked: 2146 times
  • Just Ridin'
Re: More Metal Work Projects
« Reply #9 on: July 07, 2017, 09:20:05 PM »
WOW:

Sent from my SM-G930F using Tapatalk

Cheers,
Gary
_________________________________________________________________________________________________________
Then  :blu13 Now :Spyder
Life's too short to be miserable, so enjoy it! :)
OzSTOC #257
FarRider #810
IBA #59140

Mob: 04 2448 3555
 

Offline StinkyPete

  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6587
  • Thanked: 3015 times
  • Blackwood, SA
Re: More Metal Work Projects
« Reply #10 on: July 07, 2017, 09:21:13 PM »
That's a pretty nice design Chris.  What did you use to slot the plates?
IBA #59146   OzLapper 2012 & 2019

Yamaha AS1
BSA M21 600cc single (1948)
Yamaha XS650  (The Black Wobbler)
Yamaha XJR1300 (Rocket Ship)
Honda ST1300 (Beautiful Bike)
BMW R1200RT (Technically Perfect)
Currently Bikeless
 

Offline ST2UP

  • The Pockey Poker ;)
  • Administrator
  • UNBELIEVABLE "5000 Posts" Member
  • *****
  • Posts: 5620
  • Thanked: 1341 times
  • Guyra - NSW
Re: More Metal Work Projects
« Reply #11 on: July 07, 2017, 10:12:46 PM »
That's a pretty nice design Chris.  What did you use to slot the plates?

Was a really hi-tech piece of equipment that has served me well for a number of years....not a plasma cutter no no !! free hand with a 4" angle grinder and a 2.5mm cut off wheel and a fine file.

I have a smaller one also that I made from 16g Stainless sheet.....it was for just the 2 of us in the bike camper. 
Chris    



IBA #64116   FarRider #660   Ulysses #56339

st2up@ozstoc.com

Mbl: 0428792425

Sighted it....Wanted it...Chucked a fit...GOT IT !!!!
 
The following users thanked this post: Rob Dunlop

Offline johnnyYTED

  • Supreme "2000" Club Member
  • *****
  • Posts: 2240
  • Thanked: 841 times
  • STranger 1100 n BEEstY 1330cc
Re: More Metal Work Projects
« Reply #12 on: July 07, 2017, 10:54:06 PM »
 :dred11
wow for both the rims and 'tread light designs guys :thumbsup :clap
Picton  if it doesn’t flood higher than previous times.
mobile 047 4488 436 
IBA#59147, FarRider #732
STranger 1998 ST1100, x Police
STrangler ST1300 2007 Charcoal Grey.
BEEstY 2017 Can-Am Daytona 1330.
maybe something with a little extra
:dred11 :Spyder
 

Offline StinkyPete

  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6587
  • Thanked: 3015 times
  • Blackwood, SA
Re: More Metal Work Projects
« Reply #13 on: July 08, 2017, 07:47:01 AM »
It's interesting to see the two completely different approaches to achieve the same end.   Chris's concept is practical, lightweight and flat-packable, whereas mine is heavy, decorative and would probably survive a direct hit from missile (or the toddlers).
IBA #59146   OzLapper 2012 & 2019

Yamaha AS1
BSA M21 600cc single (1948)
Yamaha XS650  (The Black Wobbler)
Yamaha XJR1300 (Rocket Ship)
Honda ST1300 (Beautiful Bike)
BMW R1200RT (Technically Perfect)
Currently Bikeless
 
The following users thanked this post: ST1100_GREG

Offline StinkyPete

  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6587
  • Thanked: 3015 times
  • Blackwood, SA
Re: More Metal Work Projects
« Reply #14 on: May 15, 2020, 02:44:46 PM »
We have a wood box in the lounge and when I get a bit enthusiastic with filling it, the wood hits the wall behind the box and leaves a mark.   With time on my hands during "Lockdown 2020" I decided to get a bit creative and have added a decorative metal screen to the back of the box to protect the wall.   It fits nicely with the decor of the room.

IBA #59146   OzLapper 2012 & 2019

Yamaha AS1
BSA M21 600cc single (1948)
Yamaha XS650  (The Black Wobbler)
Yamaha XJR1300 (Rocket Ship)
Honda ST1300 (Beautiful Bike)
BMW R1200RT (Technically Perfect)
Currently Bikeless
 
The following users thanked this post: STeveo, Wild Rose, ruSTynutz

Online ruSTynutz

  • NR2024 Rally Team
  • UNBELIEVABLE "5000 Posts" Member
  • *
  • Posts: 5026
  • Thanked: 3088 times
Re: More Metal Work Projects
« Reply #15 on: May 15, 2020, 04:04:41 PM »
Very fancy, Pete!  :clap  :thumbs

I wish I had talent when it comes to working with metal... :-[

These last few days I've been attempting to make a mounting bracket for my Tyre Pressure Monitoring System out of stainless steel resulting in pretty mixed results and lots of swearing.  :law

Damn my ocd... :fp  :rofl


        2005 Honda ST1300A
 
The following users thanked this post: StinkyPete

Offline StinkyPete

  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6587
  • Thanked: 3015 times
  • Blackwood, SA
Re: More Metal Work Projects
« Reply #16 on: May 15, 2020, 05:25:22 PM »
Come over and stay for a couple of nights and we'll get it sorted.  :thumbsup    Oh that's right ........ all of our borders are closed.  Bugger this "Lockdown 2020"  :well
IBA #59146   OzLapper 2012 & 2019

Yamaha AS1
BSA M21 600cc single (1948)
Yamaha XS650  (The Black Wobbler)
Yamaha XJR1300 (Rocket Ship)
Honda ST1300 (Beautiful Bike)
BMW R1200RT (Technically Perfect)
Currently Bikeless
 
The following users thanked this post: ruSTynutz

Online ruSTynutz

  • NR2024 Rally Team
  • UNBELIEVABLE "5000 Posts" Member
  • *
  • Posts: 5026
  • Thanked: 3088 times
Re: More Metal Work Projects
« Reply #17 on: May 15, 2020, 05:44:03 PM »
Thanks Pete!   :thumb

It's pretty much done now anyhow.
Just finished fitting it onto the front brake master cylinder mount.
It looks okay, in fact a blind man would be happy to see it!  :whistle
I'm yet to fit the sensors but thought I'd leave them to another day as I'm off for a ride with Sue tomorrow and didn't want to risk things until I'd had enough time to trial it all...


        2005 Honda ST1300A
 

Online ruSTynutz

  • NR2024 Rally Team
  • UNBELIEVABLE "5000 Posts" Member
  • *
  • Posts: 5026
  • Thanked: 3088 times
Re: More Metal Work Projects
« Reply #18 on: May 15, 2020, 06:01:33 PM »
Here's a pic...

« Last Edit: May 15, 2020, 06:05:07 PM by ruSTynutz »


        2005 Honda ST1300A
 
The following users thanked this post: Biggles

Offline StinkyPete

  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6587
  • Thanked: 3015 times
  • Blackwood, SA
Re: More Metal Work Projects
« Reply #19 on: May 15, 2020, 08:19:12 PM »
That's great ruSTynutz.   I used a similar concept for the heated grip controller on my ST, and also for the CB radio mount on my current Beemer.   I turned up a couple of short cylindrical spacers to go between the new plate and the handgrip casting and then used some slightly longer cup head (allen key) screws to hold it all in place.
IBA #59146   OzLapper 2012 & 2019

Yamaha AS1
BSA M21 600cc single (1948)
Yamaha XS650  (The Black Wobbler)
Yamaha XJR1300 (Rocket Ship)
Honda ST1300 (Beautiful Bike)
BMW R1200RT (Technically Perfect)
Currently Bikeless
 
The following users thanked this post: ruSTynutz

Offline denis gibson

  • Jr. Member
  • **
  • Posts: 97
  • Thanked: 92 times
  • ST Legend
Re: More Metal Work Projects
« Reply #20 on: May 15, 2020, 08:43:30 PM »
Very nice work guys. Been mixing concrete myself and making couple of 2.7 by 2.3 high gates for neighbor. Took four off us to hang the bloody things. Getting bike out as good days at moment over weekend. Stay safe all Denis Diane.
 
The following users thanked this post: ruSTynutz

Online ruSTynutz

  • NR2024 Rally Team
  • UNBELIEVABLE "5000 Posts" Member
  • *
  • Posts: 5026
  • Thanked: 3088 times
Re: More Metal Work Projects
« Reply #21 on: May 15, 2020, 10:12:10 PM »
That's great ruSTynutz.   I used a similar concept for the heated grip controller on my ST, and also for the CB radio mount on my current Beemer.   I turned up a couple of short cylindrical spacers to go between the new plate and the handgrip casting and then used some slightly longer cup head (allen key) screws to hold it all in place.

Thanks Pete...I actually got the idea from the bracket used on my heated grip controller!

I'm not sure if the bracket came with the grips or if the previous owner fabricated it but it inspired me to use a similar design.

I was going to use aluminium for the main bracket but thought it may not be strong enough unless I went for something probably twice as thick as the stainless steel. In hindsight it would certainly have been much easier to work!
I too needed some cylindrical spaces but I cheated, I just used some appropriate sized aluminium tubing and cut some from that...  :grin
I used slightly longer bolts as well...Luckily I had a jar of assorted bolts etc I'd purchased years ago from a motorcycle wrecking yard.

Making the bracket was actually more complicated than it looks as the tpms was designed to be mounted on the handlebar so had part of the mount on the back along with the charging point. I had to cut an appropriately shaped hole so the tpms sat flush on the bracket.

Cheers :beer


        2005 Honda ST1300A
 

Offline StinkyPete

  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6587
  • Thanked: 3015 times
  • Blackwood, SA
Re: More Metal Work Projects
« Reply #22 on: September 02, 2020, 03:51:41 PM »
I have just finished making a copy of a "Tree Popper", a cunning device for pulling out substantial woody weeds and small saplings.    See  http://www.treepopper.com.au/     My neighbour who is clearing olives from a creek bed on his land  borrowed one from somewhere, and reckoned it was seriously useful.   I thought I could make a similar device, so here's my copy of a "Tree Popper", which is now more or less community property for anyone around me who has a need.



IBA #59146   OzLapper 2012 & 2019

Yamaha AS1
BSA M21 600cc single (1948)
Yamaha XS650  (The Black Wobbler)
Yamaha XJR1300 (Rocket Ship)
Honda ST1300 (Beautiful Bike)
BMW R1200RT (Technically Perfect)
Currently Bikeless
 
The following users thanked this post: Wild Rose, ruSTynutz

Online ruSTynutz

  • NR2024 Rally Team
  • UNBELIEVABLE "5000 Posts" Member
  • *
  • Posts: 5026
  • Thanked: 3088 times
Re: More Metal Work Projects
« Reply #23 on: September 02, 2020, 04:20:19 PM »
Looks very professional!  :thumbs :clap


        2005 Honda ST1300A
 

Bodø

  • Guest
Re: More Metal Work Projects
« Reply #24 on: September 02, 2020, 05:43:17 PM »
I'm sure I could find a use for it at work.   :whistle