Author Topic: Tupperware Removal Worksheet  (Read 1030 times)

Online Shiney

  • Dave
  • Global Moderator
  • UNBELIEVABLE "5000 Posts" Member
  • *****
  • Posts: 5891
  • Thanked: 1609 times
  • RTE Coordinator - Strathpine, QLD
Tupperware Removal Worksheet
« on: January 26, 2018, 03:47:57 PM »
I just noticed that there have been some questions as to Fairing Removal / Cowl Removal / Tupperware Removal from the ST so I thought I'd post this here :grin

I recommend using the cheat sheets from St-Owners.com :thumbsup







When you remove the fasteners, you place them on the correct spot on the worksheet.  This helps keep track of all the parts.  Also, each fastener is numbered so you can see the location where it came from - and where to put it back.

Some of the socket bolts are labeled as 5mm or 6mm - this is the thread size.  Also there are two different sizes for the trim clips - one has a golf T shaped head and the other is flat.

This is what the sheets look like loaded up:




Here are the links to the full page pdf files:


Page 1 (with numbers)

Page 2 (with numbers)

Page 3 (with numbers)



This was first mentioned on OzSTOC here: http://ozstoc.com/index.php?topic=13.0
If you would like to see the original on ST-Owners follow this link: http://www.st-owners.com/forums/showthread.php?73238-ST1300-TupperWare-Worksheet


As for the actual removal of the fairings, the instruction can be found here: http://www.touringmotorcyclists.com/tech_tips/st_tech_tips/front_fairing_removal.html

Start with Remove the Inner Lower Cowl
:thumb


Cheers
Shiney
« Last Edit: February 10, 2020, 08:58:45 PM by Shiney »
My Ride: 2011 ST1300  :wht13
OzSTOC #104   STOC# 8512   IBA # 59142
Find me in The Who's Who of OzSTOC!

I like shiney things :grin
One of the Dave, Dave, Dave and Duncan crew 8)
 
The following users thanked this post: Rubencan, Wild Rose, johnnyYTED, Gerard & Sandra, CallMeSteve

Online StinkyPete

  • Defected to a BMW
  • NR2016 Group
  • UNBELIEVABLE "5000 Posts" Member
  • *
  • Posts: 5549
  • Thanked: 1903 times
  • Blackwood, SA
Re: Tupperware Removal Worksheet
« Reply #1 on: January 26, 2018, 03:49:55 PM »
These are a good resource Shiney, and I have laminated set in the shed.  Thanks for the head's up for some of our newer members.   :thumb
IBA #59146    FarRider #834    OzLapper 2012 & 2019
             "Riding the Long Roads"
 
The following users thanked this post: Shiney

Offline Gnomad42

  • Jr. Member
  • **
  • Posts: 89
  • Thanked: 31 times
  • ST Legend
Re: Tupperware Removal Worksheet
« Reply #2 on: January 26, 2018, 04:02:57 PM »
I just noticed that there have been some questions as to Fairing Removal / Cowl Removal / Tupperware Removal from the ST so I thought I'd post this here :grin

I recommend using the cheat sheets from St-Owners.com :thumbsup







When you remove the fasteners, you place them on the correct spot on the worksheet.  This helps keep track of all the parts.  Also, each fastener is numbered so you can see the location where it came from - and where to put it back.

Some of the socket bolts are labeled as 5mm or 6mm - this is the thread size.  Also there are two different sizes for the trim clips - one has a golf T shaped head and the other is flat.

This is what the sheets look like loaded up:




Here are the links to the full page pdf files:


Page 1 (with numbers)

Page 2 (with numbers)

Page 3 (with numbers)



This was first mentioned on OzSTOC here: http://ozstoc.com/index.php?topic=13.0
If you would like to see the original on ST-Owners follow this link: http://www.st-owners.com/forums/showthread.php?73238-ST1300-TupperWare-Worksheet

Cheers
Shiney
That's just so good, Shiney! Now to source a new set of fasteners and redo the set!
Thanks.

Sent from my SM-N910G using Tapatalk

 
The following users thanked this post: Shiney

Offline Gnomad42

  • Jr. Member
  • **
  • Posts: 89
  • Thanked: 31 times
  • ST Legend
Re: Tupperware Removal Worksheet
« Reply #3 on: January 26, 2018, 04:06:03 PM »
I just noticed that there have been some questions as to Fairing Removal / Cowl Removal / Tupperware Removal from the ST so I thought I'd post this here :grin

I recommend using the cheat sheets from St-Owners.com :thumbsup







When you remove the fasteners, you place them on the correct spot on the worksheet.  This helps keep track of all the parts.  Also, each fastener is numbered so you can see the location where it came from - and where to put it back.

Some of the socket bolts are labeled as 5mm or 6mm - this is the thread size.  Also there are two different sizes for the trim clips - one has a golf T shaped head and the other is flat.

This is what the sheets look like loaded up:




Here are the links to the full page pdf files:


Page 1 (with numbers)

Page 2 (with numbers)

Page 3 (with numbers)



This was first mentioned on OzSTOC here: http://ozstoc.com/index.php?topic=13.0
If you would like to see the original on ST-Owners follow this link: http://www.st-owners.com/forums/showthread.php?73238-ST1300-TupperWare-Worksheet

Cheers
Shiney
That's just so good, Shiney! Now to source a new set of fasteners and redo the set!
Thanks.

Sent from my SM-N910G using Tapatalk
Now to hunt one down for the 1100

Sent from my SM-N910G using Tapatalk

 
The following users thanked this post: Shiney

Offline Wild Rose

  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 5002
  • Thanked: 1199 times
  • Toowoomba, Qld
Re: Tupperware Removal Worksheet
« Reply #4 on: January 26, 2018, 04:32:44 PM »
Thanks very much Shiney   :like
Now just got to get game enough to pull it apart or find someone close who can help me put it back together
I will have to print out a copy for Toowoomba Honda as last time they dod a shocking job
 :beer
Leo (Wild Rose)
Honda ST 1300

:rd13       :blk13
 2002                            New 29-04-13


Ulysses #49154
FarRider #243
 
The following users thanked this post: Shiney

Offline MICK

  • Tassie NR 2019
  • Newbie
  • *
  • Posts: 28
  • Thanked: 2 times
  • JEDIMICK
Re: Tupperware Removal Worksheet
« Reply #5 on: January 26, 2018, 11:25:14 PM »
I just noticed that there have been some questions as to Fairing Removal / Cowl Removal / Tupperware Removal from the ST so I thought I'd post this here :grin

I recommend using the cheat sheets from St-Owners.com :thumbsup







When you remove the fasteners, you place them on the correct spot on the worksheet.  This helps keep track of all the parts.  Also, each fastener is numbered so you can see the location where it came from - and where to put it back.

Some of the socket bolts are labeled as 5mm or 6mm - this is the thread size.  Also there are two different sizes for the trim clips - one has a golf T shaped head and the other is flat.

This is what the sheets look like loaded up:




Here are the links to the full page pdf files:


Page 1 (with numbers)

Page 2 (with numbers)

Page 3 (with numbers)



This was first mentioned on OzSTOC here: http://ozstoc.com/index.php?topic=13.0
If you would like to see the original on ST-Owners follow this link: http://www.st-owners.com/forums/showthread.php?73238-ST1300-TupperWare-Worksheet

Cheers
Shiney
Thank you very much. Cheers Mick

Sent from my SM-T550 using Tapatalk

Smile because you can😎
 
The following users thanked this post: Shiney

Offline DBfive

  • NatRally 2018 - Mackay
  • Full Member
  • *
  • Posts: 173
  • Thanked: 73 times
  • David B
Re: Tupperware Removal Worksheet
« Reply #6 on: January 28, 2018, 01:50:23 PM »
Thanks Shiney, much more sophisticated than my numbered egg carton!
Dave B
ST1300
CB750 K7
 
The following users thanked this post: Shiney

Online richo

  • Richo
  • Legendary Member
  • *****
  • Posts: 774
  • Thanked: 289 times
  • ST 2009
Re: Tupperware Removal Worksheet
« Reply #7 on: January 28, 2018, 02:04:07 PM »
I have been using the sheet for a while but I have added a small fishing tackle tray to hold the individual bits and pieces .    I always move the sheet of knock it over and the parts move quicker than kids on icecream. 
Richo
 
The following users thanked this post: Shiney

Online Shiney

  • Dave
  • Global Moderator
  • UNBELIEVABLE "5000 Posts" Member
  • *****
  • Posts: 5891
  • Thanked: 1609 times
  • RTE Coordinator - Strathpine, QLD
Re: Tupperware Removal Worksheet
« Reply #8 on: January 28, 2018, 07:13:49 PM »
I have added a magnetic strip to the back and laminated the sheets, this works a charm for the bolts :thumbsup
(But not so good for the plastic pins :fp)
My Ride: 2011 ST1300  :wht13
OzSTOC #104   STOC# 8512   IBA # 59142
Find me in The Who's Who of OzSTOC!

I like shiney things :grin
One of the Dave, Dave, Dave and Duncan crew 8)
 

Online Shiney

  • Dave
  • Global Moderator
  • UNBELIEVABLE "5000 Posts" Member
  • *****
  • Posts: 5891
  • Thanked: 1609 times
  • RTE Coordinator - Strathpine, QLD
Re: Tupperware Removal Worksheet
« Reply #9 on: February 10, 2020, 10:02:54 PM »
For the actual removal of the fairings, the instruction can be found here: http://www.touringmotorcyclists.com/tech_tips/st_tech_tips/front_fairing_removal.html

Start with Remove the Inner Lower Cowl
:thumb


Cheers
Shiney
My Ride: 2011 ST1300  :wht13
OzSTOC #104   STOC# 8512   IBA # 59142
Find me in The Who's Who of OzSTOC!

I like shiney things :grin
One of the Dave, Dave, Dave and Duncan crew 8)
 
The following users thanked this post: ruSTynutz