Author Topic: ST1300 Migsel GPS Mount  (Read 565 times)

Online alans1100

  • 1999 ST1100A
  • RTE Coordinator
  • UNBELIEVABLE "5000 Posts" Member
  • *
  • Posts: 5950
  • Thanked: 1010 times
  • Alan, Peterborough, SA
ST1300 Migsel GPS Mount
« on: August 08, 2018, 07:30:59 PM »
Just ordered the mount to fit our Rider 450 to the 1300 - Cost $186 delivered.

I still need to get TomTom wiring kit and make do with the one cradle between both bikes.

https://buybits.glopal.com/en-AU/p-6410/genuine-migsel-honda-pan-european-gps-satnav-mounting-option-gps-r-paneuro-sku-5982.html?utm_campaign=pr_r&utm_source=buybits.com&utm_medium=wi_osf&utm_content=en_GB


main_pan-a by Alan, on Flickr
1999 :bl11  2004 :13Candy

FarRider #921- BR15, BR17, CR1

 

Online CallMeSteve

  • STrudel, Steve and Ruth.
  • Sr. Member
  • ****
  • Posts: 274
  • Thanked: 92 times
  • Eatons Hill, Brisbane.
Re: ST1300 Migsel GPS Mount
« Reply #1 on: August 08, 2018, 08:10:06 PM »
I paid AUD243 for mine including freight direct from Migsel. I did get a second ball but even so ... Not Happy Jan.   That’s a good price. I never considered I’d get a better price elsewhere for the same thing.
A man rides on his STeed, says “Why am I short of attention? Got a short little span of attention”.

You can call me Steve, with apologies to Paul Simon.

 :wht13

current:
ST1300 2014 Police

pre-kids:
CX500
CB900
CB400NB
CB350
1964 Yamaha YG-1 80cc
 

Online richo

  • Richo
  • Legendary Member
  • *****
  • Posts: 676
  • Thanked: 234 times
  • ST 2009
Re: ST1300 Migsel GPS Mount
« Reply #2 on: August 08, 2018, 08:25:11 PM »
 :thumbs. Looks good. I will have to sneak a closer look during an RTE
Richo
 

Online alans1100

  • 1999 ST1100A
  • RTE Coordinator
  • UNBELIEVABLE "5000 Posts" Member
  • *
  • Posts: 5950
  • Thanked: 1010 times
  • Alan, Peterborough, SA
Re: ST1300 Migsel GPS Mount
« Reply #3 on: August 08, 2018, 08:26:25 PM »
I did check the Migsel site and they had a world wide including shipping price of 131 Euros or about $206 and that's where we going to get it from until I saw another site and checked it out. It's about $22 cheaper all up and better in my pocket I think.

http://www.migsel.com/store/index.php?_a=viewProd&productId=49
1999 :bl11  2004 :13Candy

FarRider #921- BR15, BR17, CR1

 

Online alans1100

  • 1999 ST1100A
  • RTE Coordinator
  • UNBELIEVABLE "5000 Posts" Member
  • *
  • Posts: 5950
  • Thanked: 1010 times
  • Alan, Peterborough, SA
Re: ST1300 Migsel GPS Mount
« Reply #4 on: August 20, 2018, 02:21:24 PM »
This arrived today so I'll get around to fitting in the near future as I need a couple of other items and they can all be fitted at the same time.
1999 :bl11  2004 :13Candy

FarRider #921- BR15, BR17, CR1

 

Online alans1100

  • 1999 ST1100A
  • RTE Coordinator
  • UNBELIEVABLE "5000 Posts" Member
  • *
  • Posts: 5950
  • Thanked: 1010 times
  • Alan, Peterborough, SA
Re: ST1300 Migsel GPS Mount
« Reply #5 on: December 23, 2018, 04:02:55 PM »
After making sure the wiring worked for the GPS and the DC socket worked over here http://ozstoc.com/index.php?topic=12998.msg1247943#msg1247943 it was time to add the Migsel mount.

When I first looked at the parts for this and read up on the install it was at first thought going to be a difficult task and maybe it is if some of the related bike parts are in place but I found it quite easy.

First up was the inserts for the bolts which might be the cause of most of the angst with this install. I found them easy and with an interference fit so they stay in place.

20181223_133020 by Alan, on Flickr20181223_133029 by Alan, on Flickr

After putting the black panel back in place (not yet secured) it's just a matter of holding the mount on top while you put the two bolts in and then tighten them up with an Allen key.

20181223_134039 by Alan, on Flickr

Installed view from the rear

20181223_134050 by Alan, on Flickr

The mount comes with a 1 inch threaded ball mount but I ordered another for the phone mount when I ordered the second GPS power cradle though I may order another ball mount and use the centre spot for the GoPro cam. The centre hole as a plastic insert in it which I added after the photo was taken.

20181223_134725 by Alan, on Flickr

TomTom Rider 450 power cradle mounted in place though will need some adjustment as required when the screen is mounted back in place.

20181223_135007 by Alan , on Flickr

When I installed the wiring for the GPS I used an available hole space as I didn't want to drill a hole in any parts

20181223_135015 by Alan, on Flickr
« Last Edit: December 23, 2018, 04:09:03 PM by alans1100 »
1999 :bl11  2004 :13Candy

FarRider #921- BR15, BR17, CR1

 
The following users thanked this post: Shiney, Rubencan

Offline Shiney

  • Dave
  • Global Moderator
  • UNBELIEVABLE "5000 Posts" Member
  • *****
  • Posts: 5656
  • Thanked: 1432 times
  • RTE Coordinator - Strathpine, QLD
Re: ST1300 Migsel GPS Mount
« Reply #6 on: December 23, 2018, 04:29:35 PM »
Good work mate :thumbsup
My Ride: 2015 (Model) ST1300  :wht13
OzSTOC #104   STOC# 8512   IBA # 59142
Find me in The Who's Who of OzSTOC!

I like shiney things :grin
One of the Dave, Dave, Dave and Duncan crew 8)
 

Online alans1100

  • 1999 ST1100A
  • RTE Coordinator
  • UNBELIEVABLE "5000 Posts" Member
  • *
  • Posts: 5950
  • Thanked: 1010 times
  • Alan, Peterborough, SA
Re: ST1300 Migsel GPS Mount
« Reply #7 on: January 20, 2019, 06:38:05 PM »
All done and bike back together and ready to roll.

Just need to fine turn the TomTom view angle when I sit on the bike.

LH Ram mount fitting is for the phone mount which is still in use on the 1100.

20190120_164024 by Alan, on Flickr


20190120_164045 by Alan, on Flickr
1999 :bl11  2004 :13Candy

FarRider #921- BR15, BR17, CR1

 
The following users thanked this post: Shiney, Bodø