Author Topic: Starcom uhf lead needed please  (Read 136 times)

Offline Simmo50

  • Jr. Member
  • **
  • Posts: 82
  • Thanked: 1 times
  • ST Legend
Starcom uhf lead needed please
« on: August 12, 2018, 07:10:08 PM »
Does anyone have a spare starcom advance 1 uhf cb radio to starcom leadts for a uniden 5 watt radio.  :whit11-r,
 

Online Biggles

  • NatRally 2018 - Mackay
  • "Top Dog" 10000 club
  • *
  • Posts: 12328
  • Thanked: 1421 times
  • Bridgeman Downs, Brisbane
Re: Starcom uhf lead needed please
« Reply #1 on: August 12, 2018, 09:25:07 PM »
I'll be home on Tuesday- I think I can help.  I still have my old Starcom, plus the Uniden lead.
AND the Starcom bluetooth module if anyone is interested in that.
In fact, if anyone would like a cheap working excess-to-my-requirements Starcomm with helmet units and curly cords, shoot me a PM.  For a modest fee, I think Dale in Swansea NSW would install it for you.  I bought it from him originally and had some use from it before going to the Sena to escape the curly cords.
Of course riding a bike is dangerous, but so what? You’re not flirting with death, you’re flirting with life. Adam Piggott

OzSTOC #16  STOC #6135  FarRider #509 IBA #54927

 2000 :wht11   2004 :blu13    2009 :rd13    2008 :rd13
 

Offline Simmo50

  • Jr. Member
  • **
  • Posts: 82
  • Thanked: 1 times
  • ST Legend
Re: Starcom uhf lead needed please
« Reply #2 on: August 12, 2018, 10:14:41 PM »
does it have a single jack type fitting at one end .  i think thats what plugs into the back of my uhf
 

Online Biggles

  • NatRally 2018 - Mackay
  • "Top Dog" 10000 club
  • *
  • Posts: 12328
  • Thanked: 1421 times
  • Bridgeman Downs, Brisbane
Re: Starcom uhf lead needed please
« Reply #3 on: August 13, 2018, 04:07:32 PM »
Yes- from memory round multi-pin.
Also, IIRC, it's screws onto the top.
Of course riding a bike is dangerous, but so what? You’re not flirting with death, you’re flirting with life. Adam Piggott

OzSTOC #16  STOC #6135  FarRider #509 IBA #54927

 2000 :wht11   2004 :blu13    2009 :rd13    2008 :rd13
 

Offline Simmo50

  • Jr. Member
  • **
  • Posts: 82
  • Thanked: 1 times
  • ST Legend
Re: Starcom uhf lead needed please
« Reply #4 on: August 13, 2018, 04:16:15 PM »
should be round multi pin.  to a 3.5mm jack plug i believe
 

Online Brock

  • Tardis Tech
  • Global Moderator
  • UNBELIEVABLE "5000 Posts" Member
  • *****
  • Posts: 7390
  • Thanked: 811 times
  • White is Best
Re: Starcom uhf lead needed please
« Reply #5 on: August 25, 2018, 12:55:36 PM »
There should be a round 6 pin plug I believe to go into the starcom, and suitable plug on the other end to connect to the UHF.

Which UHF do you have, hand held or dash type.

I dont know anything about the starcom, or the pinout for the Uniden radios..
Brock
Asian Correspondent
2003 Honda ST1100PY



Ulysses #32829
STOC #8239
OzSToc # ??
Kinross WA
 

Offline Simmo50

  • Jr. Member
  • **
  • Posts: 82
  • Thanked: 1 times
  • ST Legend
Re: Starcom uhf lead needed please
« Reply #6 on: August 25, 2018, 01:09:13 PM »
 not handheld. uhf has only a jack plug at rear   
 

Online Brock

  • Tardis Tech
  • Global Moderator
  • UNBELIEVABLE "5000 Posts" Member
  • *****
  • Posts: 7390
  • Thanked: 811 times
  • White is Best
Re: Starcom uhf lead needed please
« Reply #7 on: August 25, 2018, 07:40:03 PM »
Plug at the back is audio out/external speaker. This will be a 3.5mm mono plug, which will go to the audio in wires of the 6 pin plug. The other wires needed will go to the front of the radio to the mic plug. A separate plug is used fro tx control

http://stwiki.notonthe.net/bin/view/General/StarCom
Brock
Asian Correspondent
2003 Honda ST1100PY



Ulysses #32829
STOC #8239
OzSToc # ??
Kinross WA
 

Online Totgas

  • Legendary Member
  • *****
  • Posts: 745
  • Thanked: 80 times
  • Everything is improved with "Flashing lights"
Re: Starcom uhf lead needed please
« Reply #8 on: August 25, 2018, 09:40:17 PM »
FYI - Dale is longer doing anything related to Starcom and has suggested contacting Soundrider in Queensland for any advice and support.