Author Topic: Tyre Pressure Monitor  (Read 5529 times)

Offline alans1100

  • 1999 ST1100A
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6248
  • Thanked: 1161 times
  • Alan, Peterborough, SA
Tyre Pressure Monitor
« on: July 27, 2012, 02:04:28 PM »
I saw this come up as an advert in Facebook so I had a closer look.

To be honest I'd be lucky if I checked my air pressure every two weeks, but this would make it so much easier.

Not sure how long the link will last but I have copied the review text from Motoress (a female rider site) and put a link in for the manufacturer.

http://motoress.com/readarticle.asp?articleid=674&c=technique

http://shop.tiremoni.com/en/tiremoni/measurement-range/up-to-60-psi/tiremoni-tm-400-tyre-pressure-monitoring-system/a-17/

It goes without saying motorcycle tyres / tires are one of the most important aspects of a rider’s performance and safety. The contact patch, those two small areas is what keeps us on the road. Along with the management of the tyres is the compound and condition of the tyre; the tyre pressure itself is extremely relevant to the tyre’s operation. Yet still few riders check their tyre pressure.

An investigation by the Institute of Advanced Motorists UK found we don’t check our motorcycle tyre pressures regularly enough. This survey also found nearly a quarter of pressure gauge readings at petrol stations are false. The results show that only 18% of men and just 4% of women who are on the road check tyre pressures once a week as is recommended.
The TireMoni is your little tyre pressure manager all in one! If you’re not a frequent tyre pressure checker – this gadget is definitely for you!

We’ve reviewed and tested the TireMoni system and it definitely removes the hassle of checking your tyre pressure and 'real-time' picture of your tyres air-health for further '‘peace of mind’. We found it accurate and super easy to use.

Here’s how it works. The whole system is composed of two valve cap units and a main key chain unit which when turned on, receives the feedback and readouts from the valve cap sensors. One valve cap sensor is for the front tyre and the other for the rear. Once in place, these cap-sensors will provide, on request or continuous feedback, of your tyre pressure - even its temperature!

It’s real easy to set up and comes complete with an optional ant-theft ring per cap- to avoid curious onlookers from removing the sensor. *The anti-theft ring makes it difficult to remove the cap to adjust air levels – something to consider.

The sensors must be mounted onto metal valve stems which most modern motorcycles have.

Benefits

•Aims to improve ride performance and handling by helping you maintain optimal pressures.
•Decreases chance of blow out from overinflated or underinflated tyres
•Time saver! Less ride time spent making tyre pressure checks/inspections.
•Great preventative management. While monitoring your tyre’s pressure you have the potential to detect problems before they become serious.
•Helps assist in fuel expense management. Incorrect tyre pressures i.e. an under inflated tyre can cause the bike to work harder; use more fuel.
•Assists in extending the life of your tyres by managing a consistent pressure rate.
If your tyre pressure becomes low or too high (these guidelines pre-programmed into the unit by you) - three beeps sound accompanied by a vibration from the unit. So if you can’t hear the warning you can feel it.

We don’t recommend you keep this on the same key ring as your motorcycle key, though it appears the best place to carry the TireMoni. It will be bumped around and this means subject to abuse and potential damage. Attach it to the inside of your jacket pocket, on your carry on bag or fanny pack - someplace handy to refer to it when you need.

There are various models of the TireMoni for the various types of motorcycle’s including quads/ATV’s. There's a cruiser, cruiser with trailer, trike and sidecar version. We tested the sportbike model T400.

We’re still testing its long term accuracy so stay tuned for updates.

The system is well designed and it’s obvious a lot of thought went into it!
It is a little pricey at EU 139,00 which is about $170.00.

**We really liked the fact that you can choose your measurement in PSI, BAR, or KPA.

We wouldnt classify the TireMoni as a 'must have' yet this would definitely be handy for the rider who finds it a hassle to manage tyre pressure or who rides long distances - or simply wants further peace of mind.
It makes a great gift for the rider who has everything!

More features to note:

•Unit can be turned off or kept on all the time
•Sound can be muted with the ‘mute’ button function
•Temperature selected in Celsius or Fahrenheit
•Connection status display
•Battery low light
•Backlight allows viewing in dark
•You can purchase replacement sensors if lost or damaged wich work with any unit.
Note: our model came with the tyre valve sensors numbered “1” and “2” rather than “F” for front and “R” for rear- indicated in the online photos of.
We used 1 for front and 2 for rear.

Visit the manufacturer’s website to purchase!
 
1999 :bl11  2004 :13Candy

FarRider #921- BR15, BR17, CR1

 


terrydj

  • Guest
Re: Tyre Pressure Monitor
« Reply #2 on: July 27, 2012, 04:03:43 PM »
I have been using the same on e that is in the Link for a few years now without a problem. Reads to within a couple of pounds to what the servo tyre pressure gauges and mine read, and that's close enough for me. I have the one that also has the tyre pressures for me trailer as well. Starts to work really quickly when you take off, maybe within 50 meters or so.
I only have stuff that works and I would buy it again, no problems.

« Last Edit: July 27, 2012, 04:05:58 PM by terrydj »
 

Offline saaz

  • Supreme "2000" Club Member
  • *****
  • Posts: 4542
  • Thanked: 41 times
  • Canberra ACT
Re: Tyre Pressure Monitor
« Reply #3 on: July 27, 2012, 05:22:08 PM »
Terry, is there an option to use 4 sensors for the motorcycle unit? It does not seem obvious from the website.  There is a car one with 4 sensors but I assume is not too waterproof.  I have had 2 tyres go flat from nails in the last few years, so anything that might give a warning about low pressures would be good.  I check the bike tyres all the time, but if you get a nail/flat while riding best to know sooner rather than later.
John
(Ridden on and forever in our hearts)
1996 Honda ST1100P
2014 Triumph Trophy SE
Ozstoc, STOC #7239, Farrider #461 Ulysses #061681, IBA #59143 and some others
 

Offline alans1100

  • 1999 ST1100A
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6248
  • Thanked: 1161 times
  • Alan, Peterborough, SA
Re: Tyre Pressure Monitor
« Reply #4 on: July 27, 2012, 05:39:56 PM »
Terry, is there an option to use 4 sensors for the motorcycle unit? It does not seem obvious from the website.  There is a car one with 4 sensors but I assume is not too waterproof.  I have had 2 tyres go flat from nails in the last few years, so anything that might give a warning about low pressures would be good.  I check the bike tyres all the time, but if you get a nail/flat while riding best to know sooner rather than later.


There is this one which is for a cruiser plus trailer which looks similar to the one Terry is using.

http://shop.tiremoni.com/en/motorcycle-accessories/tyres-rims/tm-450-tyre-pressure-monitoring-system-for-cruiser---trailer/a-162/
1999 :bl11  2004 :13Candy

FarRider #921- BR15, BR17, CR1

 

terrydj

  • Guest
Re: Tyre Pressure Monitor
« Reply #5 on: July 27, 2012, 05:41:42 PM »
It has 2 sensors for the bike and another 2 for the trailer.
The number 2 sensor for the bike goes on the front and the number 1 sensor goes on the back.
The unit that you look at is pretty waterproof. I have had it stop a couple of times but when it dries out its a goer. It lets you know when the pressure gets so many Psi above your set point and when the PSI gets to many less of your set point.

Tj189 has another kind on his bike and if he has,  it works as well :thumbs so give him a yell
 

terrydj

  • Guest
Re: Tyre Pressure Monitor
« Reply #6 on: July 27, 2012, 05:42:47 PM »
Terry, is there an option to use 4 sensors for the motorcycle unit? It does not seem obvious from the website.  There is a car one with 4 sensors but I assume is not too waterproof.  I have had 2 tyres go flat from nails in the last few years, so anything that might give a warning about low pressures would be good.  I check the bike tyres all the time, but if you get a nail/flat while riding best to know sooner rather than later.


There is this one which is for a cruiser plus trailer which looks similar to the one Terry is using.

http://shop.tiremoni.com/en/motorcycle-accessories/tyres-rims/tm-450-tyre-pressure-monitoring-system-for-cruiser---trailer/a-162/


That's the one on my bike
 

Offline tj189

  • Supreme "2000" Club Member
  • *****
  • Posts: 2131
  • Thanked: 150 times
  • Brisbane
Re: Tyre Pressure Monitor
« Reply #7 on: July 27, 2012, 06:08:17 PM »
As Terry suggested, I am using this one
http://www.tire-watch.com/index.php

webbikeworld has a number of reviews of TPMS

irrespective of which one you use they are a great idea  :thumbs
IBA #38035
FarRider #189
Ulysses #42456