Author Topic: FI Blinking Light Codes.....  (Read 15260 times)

Offline Diesel

  • Administrator
  • Supreme "2000" Club Member
  • *****
  • Posts: 3777
  • Thanked: 600 times
  • Launceston, Tassie
    • The Review Guys
FI Blinking Light Codes.....
« on: December 07, 2011, 01:50:10 PM »
These are the codes list for the 03 to 06 RR

If there's a code, the FI will flash your code(s). Count the flashes.

There's long blinks and short blinks.

Long = 1.3 seconds

Short = .5 seconds

If you have a long blink, then 3 short ones.....that's 13.

A long blink = 10

A short blink = 1

9 short blinks = 9....and so on.

Let us know....

CODES:

0 - bank angle sensor, ECM, PGM-FI fuse
1 - MAP sensor
2 - MAP sensor vacuum hoses, or sensor itself
7 - ECT sensor poorly connected or open circuit
8 - TP sensor, TP senspr wiring
9 - IAT sensor connection, or open wire
10 - Baro sensor, or connection, or wiring
11 - Vehicle speed sensor, or connection or wiring
12 - #1 injector connection, or faulty injector
13 - #2 injectior connection or faulty injector
14 - #1 connection or open/shorted circuit
15 - #2 connection or open/shorted circuit
18 - Cam pulse sensor, connection or loose sensor
19 - Ignition pulse sensor, connection or loose sensor
20 - faulty E-PROM in ECM.
« Last Edit: September 18, 2012, 08:22:14 AM by Diesel »
FarRider #416   IBA #55491  
OzSTOC Life Member
:candystwheelie       www.dieselst1300.blogspot.com.au
 
The following users thanked this post: robert12

Offline Mystic2

  • Jr. Member
  • **
  • Posts: 53
  • ST Legend
Re: FI Blinking Light Codes.....
« Reply #1 on: April 08, 2013, 05:56:57 PM »
Hi Diesel , I am having my FI red light coming on  :well ,the workshop mechanic said to stop put the bike in neutral and put side stand out the light will start flashing , count the flashes , 2 long & 5 short he is saying that it is a oxygen sensor , there is no noise or change in engine sounds or performance when this happens . Stop turn off engine and it resets , this intermittent at present  :||||, so will see what happens .
 :13Candy
Mystic2
 

Offline Diesel

  • Administrator
  • Supreme "2000" Club Member
  • *****
  • Posts: 3777
  • Thanked: 600 times
  • Launceston, Tassie
    • The Review Guys
Re: FI Blinking Light Codes.....
« Reply #2 on: April 08, 2013, 07:22:03 PM »
Yeah G'day Mystic2 - probs like that totally suck eggs, as you need consistency to form a line of logic - particularly in the process of problem elimination.

Is it consistently a 25?

And are you CERTAIN there is no performance drop, as this would be your key to richer or leaner fuel mixtures dealt by the oxygen sensor...


so monitor your av. fuel consumption, and the throttle response (both initial kick, and her constant acceleration) when you give her a boot.

SAAZ??? HEEEEEELLLLLLLLP!

That's all I've got Mystic - but certainly things to monitor and report back to the mech.

Cheers, Diesel
« Last Edit: April 08, 2013, 07:28:30 PM by Diesel »
FarRider #416   IBA #55491  
OzSTOC Life Member
:candystwheelie       www.dieselst1300.blogspot.com.au
 

Offline Mystic2

  • Jr. Member
  • **
  • Posts: 53
  • ST Legend
Re: FI Blinking Light Codes.....
« Reply #3 on: April 08, 2013, 07:46:58 PM »
Hey thanks Diesel ,  I will follow your Tips , being a sparky they nothing more frustrating than having a intermittent fault ! :think1
 :13Candy
Mystic2
 

Offline saaz

  • Supreme "2000" Club Member
  • *****
  • Posts: 4542
  • Thanked: 40 times
  • Canberra ACT
Re: FI Blinking Light Codes.....
« Reply #4 on: April 08, 2013, 09:07:18 PM »
I can't help with practical knowledge of the error codes, but I know there are more than 30 plus of them with the ST13. If the bike still seems to go ok probably nothing major - could be as simple as a connection. Lots of bikes keep on going even with error codes coming up, its just their way of telling you to give them some attention :)  Oxygen sensor is just one on many possible problems, and again it may not be a major one to worry about.

I have a copy of the ST13 workshop manual so can post up pages of the fault codes if required.  As with cars, read off the error code and read in the manual about what it means.  Quite often it could be just a connection that is faulty.  The wiring on the knock sensors is a known problem, and there are a few threads about that.

 Intermittent faults are the worst to diagnose!
« Last Edit: April 08, 2013, 09:20:18 PM by saaz »
John
(Ridden on and forever in our hearts)
1996 Honda ST1100P
2014 Triumph Trophy SE
Ozstoc, STOC #7239, Farrider #461 Ulysses #061681, IBA #59143 and some others
 

Offline Mystic2

  • Jr. Member
  • **
  • Posts: 53
  • ST Legend
Re: FI Blinking Light Codes.....
« Reply #5 on: April 09, 2013, 07:34:54 AM »
Hey Saaz , thanks for the reply, it is good to know you can draw on support & info from group  , I grew up racing bikes with local dealer and his mechanic so I know I wouldn't be ripped off :cuss ,we will sort it out and post what the out come is  :well
 :13Candy
Mystic2
 

Offline Trevsta83

  • Newbie
  • *
  • Posts: 45
  • Thanked: 4 times
Re: FI Blinking Light Codes.....
« Reply #6 on: December 14, 2014, 02:28:47 PM »
Guys,

I took my bike for a good ride a couple of days ago, ran like a dream as usual. Yesterday I went to ride to work and had poor idling on start up and a FI fault.

Codes 1,2,7,9,12,13,14,15 came up on diagnostic.

I stripped it down this morning and checked a heaps of connections.

After correcting / resetting the FI, should the light go out immediately or will it take a few kms of riding for it to work itself out?

I think my problem was a loose connection somewhere, I have pulled the map sensor out, checked the hoses, checked a few of the other sensor connections and the ECM connections. The diagnostic no longer shows a fault code but the FI light hasn't gone out... I have not refitted the air box etc as yet...

Don't really want to put everything back together if I still have a fault.
 

Offline Biggles

  • NatRally 2018 - Mackay
  • "Top Dog" 10000 club
  • *
  • Posts: 13347
  • Thanked: 1820 times
  • Bridgeman Downs, Brisbane
Re: FI Blinking Light Codes.....
« Reply #7 on: December 14, 2014, 04:07:34 PM »
Since the airbox is off, do the 5 way line clean job, and don't forget the ones under the junction.
That should clear it.
The FI light should be clear straight away, not after a ride.
For the modern man who lives in the city, riding a bike might be one of the only ways to escape the humdrum monotony. To take off and ride. To be both at one with nature and one with the bike. To feel masculine. Adam Piggott

OzSTOC #16  STOC #6135  FarR #509  IBA #54927
 

Offline Trevsta83

  • Newbie
  • *
  • Posts: 45
  • Thanked: 4 times
Re: FI Blinking Light Codes.....
« Reply #8 on: December 14, 2014, 04:11:35 PM »
Beauty, I have now reassembled and it is running fine.

Must have been another loose connection somewhere.

Back on the road tonight  :thumbsup
 

Offline Biggles

  • NatRally 2018 - Mackay
  • "Top Dog" 10000 club
  • *
  • Posts: 13347
  • Thanked: 1820 times
  • Bridgeman Downs, Brisbane
Re: FI Blinking Light Codes.....
« Reply #9 on: December 14, 2014, 04:14:33 PM »
When the airbox is off, the connector on the back of it will be off and that will make the FI light come on.
For the modern man who lives in the city, riding a bike might be one of the only ways to escape the humdrum monotony. To take off and ride. To be both at one with nature and one with the bike. To feel masculine. Adam Piggott

OzSTOC #16  STOC #6135  FarR #509  IBA #54927
 

Offline Trevsta83

  • Newbie
  • *
  • Posts: 45
  • Thanked: 4 times
Re: FI Blinking Light Codes.....
« Reply #10 on: December 14, 2014, 04:44:46 PM »
Yeah I noticed that after I posted. Once I put it all back together the FI light went off.
 

Online robert12

  • Newbie
  • *
  • Posts: 11
  • Thanked: 2 times
  • ST Legend
Re: FI Blinking Light Codes.....
« Reply #11 on: April 22, 2020, 08:21:01 PM »
Thanks for this Deisel, was able to check codes on recent test ride,,came up as 2 long blinks and 6 short blinks,,I call it 26 or code 2 and code 6,,going to let it develop if any.,,thanks again,,Robert
 

Online Brock

  • Tardis Tech
  • Global Moderator
  • UNBELIEVABLE "5000 Posts" Member
  • *****
  • Posts: 7854
  • Thanked: 1077 times
  • White is Best
Re: FI Blinking Light Codes.....
« Reply #12 on: April 22, 2020, 11:25:27 PM »
Brock
Asian Correspondent
2003 Honda ST1100PY



Ulysses #32829
STOC #8239
OzSToc # ??
Kinross WA
 
The following users thanked this post: ruSTynutz