Author Topic: Driving Light Mountings For 1100  (Read 19364 times)

alans1100

  • Guest
Driving Light Mountings For 1100
« on: December 19, 2011, 11:18:48 AM »
I found the extra light mountings from the ST1100 police bike. Parts 15 & 16 plus bolts 23 & 24.


http://www.st-1100.com/st1100-parts-fiche-windscreen-st1100py.html


 :bl11 Alan

 

alans1100

  • Guest
Re: Driving Light Mountings For 1100
« Reply #1 on: January 11, 2012, 01:15:30 PM »
Hi all,

I was asked for a wiring diagram for the spotlights on my 1100. I lost the one that came with my set but this a basic lay out.



Spotlights on my 1100 taken at Karratha truck stop while living there June 2009



How I mounted them under headlight. Mounted bracket and used the two screws for fairing mount.



Placed the light Switch in the optional switch cut-a-way on left fairing.



It's not to elegant, but it works and If I decided to remove them the fairing remains undamaged.

 :bl11

Alan
« Last Edit: July 19, 2017, 11:05:58 PM by alans1100 »
 

saaz

  • Guest
Re: Driving Light Mountings For 1100
« Reply #2 on: January 11, 2012, 04:41:48 PM »
Alan, any reinforcing  up under where the brackets are mounted, or is that area plenty strong enough?  I have the police brackets, but under there might be good for lightweight LEDs or such
 

Offline bobSTer

  • Full Member
  • ***
  • Posts: 121
  • Thanked: 9 times
  • ST Legend
Re: Driving Light Mountings For 1100
« Reply #3 on: January 11, 2012, 05:19:37 PM »
Just like any ST - just check the great trailer he has in tow - power to go with power to spare

I have seen 4 x LED lights (strip) mounted in same position - not drive light but xtra awareness lights

Bob

 :dred11
Regards
Robert

1998 Non ABS ST1100
Ulysses #50219
Pajero NT 3.2 DID Pajero
"TOMORROW" (noun)
A mystical land where 99% of all human productivity, motivation and achievement is stored.
 

alans1100

  • Guest
Re: Driving Light Mountings For 1100
« Reply #4 on: January 11, 2012, 05:32:09 PM »
Alan, any reinforcing  up under where the brackets are mounted, or is that area plenty strong enough?  I have the police brackets, but under there might be good for lightweight LEDs or such

I would hate to hazard a guess but I can't see or feel anything under the headlight.

Alan
 

Offline scarp

  • Legendary Member
  • *****
  • Posts: 853
  • Thanked: 4 times
  • Huntingdale, Westralia
Re: Driving Light Mountings For 1100
« Reply #5 on: January 11, 2012, 08:25:15 PM »
Alan, any reinforcing  up under where the brackets are mounted, or is that area plenty strong enough?  I have the police brackets, but under there might be good for lightweight LEDs or such

I would hate to hazard a guess but I can't see or feel anything under the headlight.

Alan
I did notice the special webbing in the 2nd photo
FR# 431
IBA# 60317
 

alans1100

  • Guest
Re: Driving Light Mountings For 1100
« Reply #6 on: January 12, 2012, 11:51:48 AM »
Alan, any reinforcing  up under where the brackets are mounted, or is that area plenty strong enough?  I have the police brackets, but under there might be good for lightweight LEDs or such

I would hate to hazard a guess but I can't see or feel anything under the headlight.

Alan
I did notice the special webbing in the 2nd photo


I just can't seem to train the pet spiders these days