They do look good, I think the amp draw is a smidgeon less than my HID spots and a smidgeon less than the Glenda led's. The led spot version distance is not quiet there compared to the HID.I don't think you would go wrong if you were purchasing a pair
The sad thing is that with 70w HID hi/lows and 55w HID euro spots I am still seriously thinking about how to mount some LED spots below the mirrors just to get that bit more for those times when you need a faster start up time and pure distance as opposed to spread . How much is enough..well depends what you get used to!Quote from: tj189 on July 11, 2013, 06:56:08 PMThey do look good, I think the amp draw is a smidgeon less than my HID spots and a smidgeon less than the Glenda led's. The led spot version distance is not quiet there compared to the HID.I don't think you would go wrong if you were purchasing a pair
Does anyone know if you can have both the Police over-bracket and the Dick Seng under-bracket together on the mirror mount?This is getting a bit theoretical, because Missus Biggles already thinks the Narvas over the mirrors ruin the bike's looks.
What needs to be remembered is all that gear is held on by 2x M6 bolts. onto that 2.2mm plate. Its that plate I;m working to beef up as part of a kit.
Good work Chris, can't wait to see the finished product......glad I didn't throw away my old Rallye 2000's they might live to shine again......well maybe not
Yes they do, with a slight modification to the police brackets. Not a big project just the removal of a small part of the bracket and a longer bolt. I have had the ST1100 set up that way and added the same setup to the ST1300. This setup has done the odd few Km's without issue.
Quote from: tj189 on July 12, 2013, 11:30:56 PMYes they do, with a slight modification to the police brackets. Not a big project just the removal of a small part of the bracket and a longer bolt. I have had the ST1100 set up that way and added the same setup to the ST1300. This setup has done the odd few Km's without issue.You're not worried about the issue Gatey raises regarding the strength of the stock mounting plate?