« previous next »
Pages: [1]   Go Down

Author Topic: Ram Mount for Clutch cover  (Read 4553 times)

Offline Biggles

  • "Top Dog" 10000 club
  • *****
  • Posts: 14264
  • Thanked: 2761 times
  • Bridgeman Downs, Brisbane
Ram Mount for Clutch cover
« on: July 24, 2014, 09:58:13 AM »
I think I saw someone in here with the Ram single ball mount that replaces (or sits on top of) the clutch reservoir on the ST13.
When I tried to get this a few months ago, the seller's measurement of the hole spacing was 60mm and of course, the screw centres are 70mm.
Any ideas?  Or better yet, a part number?
Logged
For the modern man who lives in the city, riding a bike might be one of the only ways to escape the humdrum monotony. To take off and ride. To be both at one with nature and one with the bike. To feel masculine. Adam Piggott

OzSTOC #16  STOC #6135  FarR #509  IBA #54927
 

Offline West Aussie Glen

  • old fart
  • Supreme "2000" Club Member
  • *****
  • Posts: 3282
  • Thanked: 946 times
  • Willetton, Perth
Re: Ram Mount for Clutch cover
« Reply #1 on: July 24, 2014, 10:24:24 AM »
Logged
Glen
Sold
1948 James 98cc 2 Speed, 1969 Suzuki A100-2
1970 Suzuki T250 Hustler, Honda CL100
Yamaha RD250C, 1985 Kawasaki GPZ250
BMW K75S, 78 Yamaha XS11
Yamaha Royal Star Tour Deluxe, 88 GL1500
99 SE GL1500
In the shed
85 Kawasaki LTD250
88 GL1500 Outfit
08 ST1300
2013 GL1800
2013 GL1800 Outfit
 

Offline StinkyPete

  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6615
  • Thanked: 3074 times
  • Blackwood, SA
Re: Ram Mount for Clutch cover
« Reply #2 on: July 24, 2014, 11:48:57 AM »
Quote from: Biggles on July 24, 2014, 09:58:13 AM
I think I saw someone in here with the Ram single ball mount that replaces (or sits on top of) the clutch reservoir on the ST13.
When I tried to get this a few months ago, the seller's measurement of the hole spacing was 60mm and of course, the screw centres are 70mm.
Any ideas?  Or better yet, a part number?

I have an offset RAM mount for my CB radio, which sits above of the clutch reservoir cover.   I'll check for a RAM part number and post photo when I get home later today.
Logged
IBA #59146   OzLapper 2012 & 2019

Yamaha AS1
BSA M21 600cc single (1948)
Yamaha XS650  (The Black Wobbler)
Yamaha XJR1300 (Rocket Ship)
Honda ST1300 (Beautiful Bike)
BMW R1200RT (Technically Perfect)
Currently Bikeless
 

Offline Biggles

  • "Top Dog" 10000 club
  • *****
  • Posts: 14264
  • Thanked: 2761 times
  • Bridgeman Downs, Brisbane
Re: Ram Mount for Clutch cover
« Reply #3 on: July 24, 2014, 12:46:13 PM »
Thankyouse Glen and Pete.

I'll go with the MCL one just because I think it's neater to replace the cover rather than sit another plate on top of it.
Just my preference.
Not cheap, though, especially with our exchange rate at present and US$35 postage.    :eek
Logged
For the modern man who lives in the city, riding a bike might be one of the only ways to escape the humdrum monotony. To take off and ride. To be both at one with nature and one with the bike. To feel masculine. Adam Piggott

OzSTOC #16  STOC #6135  FarR #509  IBA #54927
 

Offline StinkyPete

  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6615
  • Thanked: 3074 times
  • Blackwood, SA
Re: Ram Mount for Clutch cover
« Reply #4 on: July 24, 2014, 01:40:57 PM »
No worries, and I agree that the MCL product looks very good and integrates much better than the RAM product on the bike.
Logged
IBA #59146   OzLapper 2012 & 2019

Yamaha AS1
BSA M21 600cc single (1948)
Yamaha XS650  (The Black Wobbler)
Yamaha XJR1300 (Rocket Ship)
Honda ST1300 (Beautiful Bike)
BMW R1200RT (Technically Perfect)
Currently Bikeless
 

Offline Shiney

  • Dave
  • Global Moderator
  • UNBELIEVABLE "5000 Posts" Member
  • *****
  • Posts: 6977
  • Thanked: 2558 times
  • RTE Coordinator - Strathpine, QLD
Re: Ram Mount for Clutch cover
« Reply #5 on: July 24, 2014, 03:30:09 PM »
Is this the one you were after?


Motorbike Reservoir cover    http://www.ja-gps.com.au/RAM/ram-b-346u/





If you go for this don't forget the OzSTOC discount:

Johnny Appleseed GPS (For Ram Mounts & Brackets)
Logged
My Ride: 2023 ST1800   :thumb
OzSTOC #104   STOC# 8512   IBA # 59142
Find me in The Who's Who of OzSTOC!

I like shiney things :grin
One of the Dave, Dave, Dave and Duncan crew 8)
 

Offline Biggles

  • "Top Dog" 10000 club
  • *****
  • Posts: 14264
  • Thanked: 2761 times
  • Bridgeman Downs, Brisbane
Re: Ram Mount for Clutch cover
« Reply #6 on: July 24, 2014, 06:08:37 PM »
That's the one the retailer girl told me had 60mm centres on the holes.  Otherwise I would have bought it.
Now I'll just wait for the MCL one to arrive.  It has the added advantage of not having superfluous holes, and we don't want to spoil the ST's good looks.
Logged
For the modern man who lives in the city, riding a bike might be one of the only ways to escape the humdrum monotony. To take off and ride. To be both at one with nature and one with the bike. To feel masculine. Adam Piggott

OzSTOC #16  STOC #6135  FarR #509  IBA #54927
 

Offline Shiney

  • Dave
  • Global Moderator
  • UNBELIEVABLE "5000 Posts" Member
  • *****
  • Posts: 6977
  • Thanked: 2558 times
  • RTE Coordinator - Strathpine, QLD
Re: Ram Mount for Clutch cover
« Reply #7 on: July 24, 2014, 06:22:20 PM »
The MCL one does look very nice :thumbs
Logged
My Ride: 2023 ST1800   :thumb
OzSTOC #104   STOC# 8512   IBA # 59142
Find me in The Who's Who of OzSTOC!

I like shiney things :grin
One of the Dave, Dave, Dave and Duncan crew 8)
 

Offline ST2UP

  • The Pockey Poker ;)
  • Administrator
  • UNBELIEVABLE "5000 Posts" Member
  • *****
  • Posts: 5626
  • Thanked: 1376 times
  • Guyra - NSW
Re: Ram Mount for Clutch cover
« Reply #8 on: July 24, 2014, 06:30:33 PM »
I have one of the MCL ones.......very nicely made  :like

On loan at the moment as it was surplus to my needs.......that may change in the future  :think1


 :beer
Logged
Chris    



IBA #64116   FarRider #660   Ulysses #56339

st2up@ozstoc.com

Mbl: 0428792425

Sighted it....Wanted it...Chucked a fit...GOT IT !!!!
 
Pages: [1]   Go Up
« previous next »