« previous next »
Pages: [1]   Go Down

Author Topic: Tow bar installation problem  (Read 5548 times)

Offline spanner

  • Blue is better .... apparently
  • Legendary "1000 Club" Member
  • *****
  • Posts: 1356
  • Thanked: 181 times
  • legend in my own match box.
Tow bar installation problem
« on: December 14, 2014, 03:37:10 PM »
.
Logged
F.R. #905

I.B.A. # 63008

I acknowledge the Bindal and Wulgurukaba traditional custodians of this Australian land that I work, live and play on, and pay my respect to their cultures, their ancestors and to the elders, past, present and all future generations.
 

Offline spanner

  • Blue is better .... apparently
  • Legendary "1000 Club" Member
  • *****
  • Posts: 1356
  • Thanked: 181 times
  • legend in my own match box.
Re: Tow bar installation problem
« Reply #1 on: December 14, 2014, 03:51:35 PM »
does rhis tow bar look like it is meant to fit my ST1100?

I am possibly not having a good day!
Logged
F.R. #905

I.B.A. # 63008

I acknowledge the Bindal and Wulgurukaba traditional custodians of this Australian land that I work, live and play on, and pay my respect to their cultures, their ancestors and to the elders, past, present and all future generations.
 

Offline alans1100

  • 1999 ST1100A
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6248
  • Thanked: 1161 times
  • Alan, Peterborough, SA
Re: Tow bar installation problem
« Reply #2 on: December 14, 2014, 03:58:37 PM »
A little hard to tell with the image 90 degree out at first....... but look like tyre is to wide or frame to narrow.

I use the Classic towbar and the hangers are bolted on and I have 40mm or more clearance each side of the tyre. I still have to remove the bar and leave the supports hanging when I change the rear tyre
Logged
1999 :bl11  2004 :13Candy

FarRider #921- BR15, BR17, CR1

 

Offline STeveo

  • Legendary "1000 Club" Member
  • *****
  • Posts: 1655
  • Thanked: 417 times
  • ST Legend
Re: Tow bar installation problem
« Reply #3 on: December 14, 2014, 06:14:39 PM »
Just bend it in a bit until it fits.
Logged
 

Offline spanner

  • Blue is better .... apparently
  • Legendary "1000 Club" Member
  • *****
  • Posts: 1356
  • Thanked: 181 times
  • legend in my own match box.
Re: Tow bar installation problem
« Reply #4 on: December 14, 2014, 10:59:51 PM »
Ooohkaaayyy


i just cant tell where in the world it is supposed to attach.

Anyone able to helpout a useless tool?

pics or diagrams would be ever so muchly appreciated. 

I can send other pics if needed. 
Logged
F.R. #905

I.B.A. # 63008

I acknowledge the Bindal and Wulgurukaba traditional custodians of this Australian land that I work, live and play on, and pay my respect to their cultures, their ancestors and to the elders, past, present and all future generations.
 

Offline alans1100

  • 1999 ST1100A
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6248
  • Thanked: 1161 times
  • Alan, Peterborough, SA
Re: Tow bar installation problem
« Reply #5 on: December 15, 2014, 01:32:43 AM »
It looks like the needed bolts are wrapped at the mounting points which are the exhaust mounting......The OEM bolts come out as they're not long enough

The 4th picture shows the towbar mounted inboard of the muffler, was the only one I could find on here at the moment.......http://ozstoc.com/index.php?topic=4738.msg50795#msg50795

This where mine bolted for the hangers/supports http://ozstoc.com/index.php?topic=2562.msg26016#msg26016 and I had to make a hole each side for them to slide in. Yours look rigid compared to mine so it might locate at a different location on the upper bike frame.

You might find that once it's installed the wheel clearance will be much better than now.
Logged
1999 :bl11  2004 :13Candy

FarRider #921- BR15, BR17, CR1

 

Offline Gatey

  • Sr. Member
  • ****
  • Posts: 273
  • Thanked: 23 times
  • ST Legend
Re: Tow bar installation problem
« Reply #6 on: December 15, 2014, 05:06:38 PM »
What ever you do Spanner just make a habit of checking the tow-bar frame to diff filler cap clearance...often often often.

Just ask Lionel.

The problem is they can be pulled left out of alignment with the centreline of the bike and crash into the diff plug. And it does not matter what brand bar. Ive seen it on a few more ST's and its eveident on other bikes too.
Logged
Persevere...My Dad did.
FarRider #269..IBA#54983
One of the Barraba Crew
 

Offline spanner

  • Blue is better .... apparently
  • Legendary "1000 Club" Member
  • *****
  • Posts: 1356
  • Thanked: 181 times
  • legend in my own match box.
Re: Tow bar installation problem
« Reply #7 on: December 15, 2014, 10:21:05 PM »
Thanks heaps for the heads up on that one !

 ++
Logged
F.R. #905

I.B.A. # 63008

I acknowledge the Bindal and Wulgurukaba traditional custodians of this Australian land that I work, live and play on, and pay my respect to their cultures, their ancestors and to the elders, past, present and all future generations.
 

Offline Totgas

  • Legendary Member
  • *****
  • Posts: 757
  • Thanked: 84 times
  • Everything is improved with "Flashing lights"
Re: Tow bar installation problem
« Reply #8 on: December 17, 2014, 10:58:56 PM »
Hi Spanner,
The towbar in the picture does not appear to be designed to fit an ST1100. I have done quite an extensive search of the web for various ST1100 towbars and can't find any that match your photo.
As Allan said too narrow, and bending the bars will only weaken the whole thing and effect the geometry. Apart for Allan's install I also found this one http://www.st-riders.net/index.php?topic=7615.0 which shows what the towbar should look like and where it attaches. If I was you I would calk it up to experience and source another - Sorry.

This may be a better option;http://www.ebay.com.au/itm/Honda-Motorcycle-tow-bar-tow-hitch-trailer-tow-/190507300536?clk_rvr_id=750298864230

A.
.
Logged
I acknowledge hardworking Australians no matter who they are or where they come from. All those who have contributed to this wonderful country deserve an equal share of gratitude for their contributions. To single any group of individuals out for special homage only denigrates the rest of us.
 

Online StinkyPete

  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6617
  • Thanked: 3079 times
  • Blackwood, SA
Re: Tow bar installation problem
« Reply #9 on: December 18, 2014, 05:39:42 AM »
Quote from: Totgas on December 17, 2014, 10:58:56 PM
The towbar in the picture does not appear to be designed to fit an ST1100.....

Spanner, contact the previous owner using the e.mail address I sent you.  The towbar WAS previously fitted to an 1100.
Logged
IBA #59146   OzLapper 2012 & 2019

Yamaha AS1
BSA M21 600cc single (1948)
Yamaha XS650  (The Black Wobbler)
Yamaha XJR1300 (Rocket Ship)
Honda ST1300 (Beautiful Bike)
BMW R1200RT (Technically Perfect)
Currently Bikeless
 

Offline spanner

  • Blue is better .... apparently
  • Legendary "1000 Club" Member
  • *****
  • Posts: 1356
  • Thanked: 181 times
  • legend in my own match box.
Re: Tow bar installation problem
« Reply #10 on: December 18, 2014, 07:51:28 AM »
Thanks Stinky.
Logged
F.R. #905

I.B.A. # 63008

I acknowledge the Bindal and Wulgurukaba traditional custodians of this Australian land that I work, live and play on, and pay my respect to their cultures, their ancestors and to the elders, past, present and all future generations.
 
Pages: [1]   Go Up
« previous next »