Author Topic: Pendle ST1300 Parking Brake (Read 26518 times)

StinkyPete · « **on:** December 26, 2013, 08:26:18 AM »

http://www.tworrall.talktalk.net/

Here you go! For all of those who were interested in a Middleton Handbrake, here's an alternative, known as a Pendle Parking Brake. It can be purchased via ebay at http://www.ebay.com.au/itm/Honda-ST1300-Parking-Brake-for-Models-2003-2008-/231105750923?pt=UK_Motorcycle_Parts_13&hash=item35cef9e78b&_uhb=1 for around $70 AUD, and postage from GB looks like it is included. I just might get my self one of these.

I've sent an e.mail to Tony to confirm if shipping to Oz is included. Make sure you order the correct kit, as there are two ST1300 kits, depending upon the type of brake lever that you have fitted.

StinkyPete · « **Reply #1 on:** December 27, 2013, 06:39:08 AM »

I've just ordered a Pendle Parking Brakes via ebay. Tony covers the postage, so the kit has cost me about $70 Aussie dollars, delivered. Once I receive it, I'll post some photos and provide a report.

The type of brake lever was changed during 2008, so refer to the photos on the web site http://www.tworrall.talktalk.net/ and make sure you order the correct kit.

StinkyPete · « **Reply #2 on:** January 13, 2014, 02:44:32 PM »

My "Pendle Parking Brake" arrived today. It was a ten minute job to fit it accordance with the supplied instructions, which are also shown on the web site link. http://www.tworrall.talktalk.net/ It's an alternative to the Middleton Brake that Abe and Saaz are using. I haven't posted any photos, 'cause there's lots on their web site.

ruSTyEB · « **Reply #3 on:** January 13, 2014, 10:24:28 PM »

TonyWorrall · « **Reply #4 on:** January 15, 2014, 11:18:20 PM »

Hope no one objects but I have just joined your forum from the England where we do not talk about the cricket. I would like to thank all your members who have shown an interest in and especially to those who have purchased my Pendle Parking Brakes. Yes postage is F.O.C.
I have not sold many ST1100 ones but the 1300s are going reasonably well from down under.
The feedback I have received from Oz, USA, Canada and Europe has been great but sales are a bit slow in the Northern hemisphere I think due to the wintery weather, all bikes are laid up under cover hibernating.
I really appreciate the feedback I get from you guys, especially about the 40 deg weather you are currently getting. I do not know how you cope with wearing all the gear in those temperatures. The Pans must be blowing hot air over your legs all time. Wish you could send some of it our way ( 5 deg wet and windy here - so whats new I hear you say ).
Thanks again for your interest and great comms & feedback - it really is appreciated.
Kind regards
Tony
http://www.tworrall.talktalk.net/

West Aussie Glen · « **Reply #5 on:** January 15, 2014, 11:35:24 PM »

Good timing Pete, I can inspect it on Saturday week.

Shiney · « **Reply #6 on:** January 15, 2014, 11:47:05 PM »

Quote from: TonyWorrall on January 15, 2014, 11:18:20 PM

Hope no one objects but I have just joined your forum from the England where we do not talk about the cricket. I would like to thank all your members who have shown an interest in and especially to those who have purchased my Pendle Parking Brakes. Yes postage is F.O.C.
I have not sold many ST1100 ones but the 1300s are going reasonably well from down under.
The feedback I have received from Oz, USA, Canada and Europe has been great but sales are a bit slow in the Northern hemisphere I think due to the wintery weather, all bikes are laid up under cover hibernating.
I really appreciate the feedback I get from you guys, especially about the 40 deg weather you are currently getting. I do not know how you cope with wearing all the gear in those temperatures. The Pans must be blowing hot air over your legs all time. Wish you could send some of it our way ( 5 deg wet and windy here - so whats new I hear you say ).
Thanks again for your interest and great comms & feedback - it really is appreciated.
Kind regards
Tony
http://www.tworrall.talktalk.net/

G'day Tony, welcome to the forum

TonyWorrall · « **Reply #7 on:** February 18, 2014, 05:04:28 AM »

Following new negotiations with material suppliers I am pleased to be able to offer the ST1300 Pendle Parking Brakes at reduced prices.
The later models (A9 on) can be purchased for £30 and the earlier models which include a new LEVER can be purchased for £34.
The ST1100 models are still available for £28
I am also pleased to offer FREE DELIVERY WORLDWIDE on all types. If you are interested then please use Ebay to make your purchase or contact me direct via the contact details on my web site.
http://www.tworrall.talktalk.net/
Kind regards
Tony

TonyWorrall · « **Reply #8 on:** May 01, 2014, 09:55:14 PM »

Sorry to report that I am ending the production of the ST1300 P/Brake due to a failure of sales.

I will be continuing with the ST1100 type as this one continues to be very popular all over the world.

I have been informed that the lack of sales of the 1300 type probably stems from an article in the UK Pan Clan
magazine which was critical of the design and raised safety concerns.
The article suggested that it should have been designed upside down (HOW?) as this would prevent any failure
of a broken spring causing a potential hazard. It also suggested that over vigorous cleaning could damage
the spring.

Details of all the safety tests carried out (including broken spring or jammed plunger) were provided to the Pan Clan UK
These safety tests proved conclusively that the Pan Clan report was nothing more than academic clap trap.
Unfortunately my reply to them which included details of the tests were completely ignored and not published.

I have not received a single reported failure of the ST1100 design in over 14 years, on the contrary, everyone
has been extremely complimentary.

The ST1300 design follows the exact same principle as the ST1100 type.

To the few people who have purchased the ST1300 brake I will assure you of my full service backup and support.

Following this announcement, if any of my 1300 customers have any concerns about safety, quality or reliability of
the product I have supplied I am prepared to offer a full refund should you wish to return the item. Please be assured
that a broken spring or jammed plunger can never prevent the brake being applied. THE DESIGN IS FAILSAFE.

Regards
A disappointed
Tony

Sicman · « **Reply #9 on:** May 01, 2014, 10:02:12 PM »

Dude - Dont give up just yet - We Aussies can decipher crap

and filter out the bullshit

I know of a couple of orders coming to you soon - We talked about ordering, but just havent got around to it yet

Aint that right BB

Brock · « **Reply #10 on:** May 01, 2014, 10:02:42 PM »

Thats a shame Tony, what would be the cut off date should any-one here in Oz wish to purchase one for the 1300??

TonyWorrall · « **Reply #11 on:** May 01, 2014, 10:21:17 PM »

Hi
I have had about 6 laying on my desk for the last 3 months. I cant suggest a final date but once these are gone (if they ever go) that will be the end.
Kind regards
Tony

Sicman · « **Reply #12 on:** May 01, 2014, 10:36:51 PM »

They dont show on Aussie ebay - I will try the UK version

StinkyPete · « **Reply #13 on:** May 01, 2014, 11:15:18 PM »

That's a bugger Tony. I'm really happy with mine, and would encourage and of our members who are looking for a parking brake to buy one of yours.

ST2UP · « **Reply #14 on:** May 01, 2014, 11:47:57 PM »

Meant to attend to this last week......know don't seam to be able to find ebay link

TonyWorrall · « **Reply #15 on:** May 02, 2014, 01:54:59 AM »

Hi
I have not relisted the 1300 on ebay as I was just wasting money with the ads
No sales for 2 months except one to Oz.
As I give free postage it is not really worthwhile selling just to Oz - I needed a UK market to help me to continue.
Kind regards
Tony

West Aussie Glen · « **Reply #16 on:** May 02, 2014, 02:20:43 AM »

Tony,
I have sent an email to tworrall@msn.com re purchase of an ST1300 park brake.

West Aussie Glen · « **Reply #17 on:** May 02, 2014, 08:17:15 PM »

I definitely want one of these. I have exchanged emails with Tony and he is happy to look at a group buy if there are others definitely interested. Any starters?

atoyot · « **Reply #18 on:** May 02, 2014, 08:26:15 PM »

Quote from: West Aussie Glen on May 02, 2014, 08:17:15 PM

I definitely want one of these. I have exchanged emails with Tony and he is happy to look at a group buy if there are others definitely interested. Any starters?

I bought one a few months ago, so can't justify another, but I can highly recommend this brake from Tony. Once ST1300 owners see them, how they work, and how handy they are, they will want one! Just make sure you get the correct one for pre-08 models.

West Aussie Glen · « **Reply #19 on:** May 02, 2014, 08:32:04 PM »

Three choices:-
ST1100
ST1300 upto 07 and
ST1300 08 onwards

TonyWorrall · « **Reply #20 on:** May 02, 2014, 08:34:28 PM »

I would just like to say thank you very much for all the emails/messages of good will etc I have received from all you guys "down under".
The brakes have now been relisted on Ebay but I can confirm that a group buy and delivery to a single Aussie address would attract a reasonable discount.
Thanks again for all your support.
Kind regards
Tony

STroppy · « **Reply #21 on:** May 02, 2014, 08:52:13 PM »

I'll put my hand up for a 2009 on version . . .

STroppy · « **Reply #22 on:** May 02, 2014, 09:47:03 PM »

Just bought one on Ebay . .

atoyot · « **Reply #23 on:** May 02, 2014, 10:01:15 PM »

One thing I did mean to say is before anyone orders, check your brake lever type as I needed the '09 and later type, but my '08 model ST has the later type of brake lever. Not sure why, but it's worth checking yours just in case....Yours should definitely be right Terry.

STroppy · « **Reply #24 on:** May 02, 2014, 10:05:45 PM »

I chatted with Tony a d sent him fotos of my lever . . I also needed the 09 on version. Got a mesage from him that he was relisting the parking brake on ebay so went and bought it . . . Thanks for all the info Andrew and you too Pete . . .

News:

Author Topic: Pendle ST1300 Parking Brake (Read 26518 times)

atoyot

atoyot