« previous next »
Pages: [1]   Go Down

Author Topic: Rostra CC fine tuning  (Read 2241 times)

Offline curious1

  • Full Member
  • ***
  • Posts: 121
  • Thanked: 16 times
  • ST Legend
Rostra CC fine tuning
« on: December 25, 2015, 02:45:41 PM »
 As I have completed my Rostra CC install I am still looking how to refine the operation. With practice runs and changing setting between I have come to the conclusion that the closer you get the pulses from the ST to match the expected pulses by the Rostra CC the finer the operation.
Jaycar has a speed corrector for Speedo's which I have checked out and has great division capability. At the moment I use a divide by 4 electronic interface which gets me close to what I want but not 100%. I will report on the outcome with the speed corrector.
Logged
ST1300
NC750
E-Bikes
Pedal bikes
Uni-cycle
 
The following users thanked this post: STroppy, cravenhaven

Offline Shiney

  • Dave
  • Global Moderator
  • UNBELIEVABLE "5000 Posts" Member
  • *****
  • Posts: 6977
  • Thanked: 2558 times
  • RTE Coordinator - Strathpine, QLD
Re: Rostra CC fine tuning
« Reply #1 on: December 25, 2015, 03:07:19 PM »
opcorn opcorn opcorn

Sent from my SM-N9005 using Tapatalk

Logged
My Ride: 2023 ST1800   :thumb
OzSTOC #104   STOC# 8512   IBA # 59142
Find me in The Who's Who of OzSTOC!

I like shiney things :grin
One of the Dave, Dave, Dave and Duncan crew 8)
 
The following users thanked this post: cravenhaven

Offline tremarg

  • Jr. Member
  • **
  • Posts: 60
  • Thanked: 13 times
  • ST Legend
Re: Rostra CC fine tuning
« Reply #2 on: January 25, 2016, 11:57:27 AM »
The speed corrector from Jaycar is necessary and will bring you into the pulse range for the Rostra. However, I spent some years trying to resolve the sensitivity issue. This was fixed by halving the mechanical operation of the throttle. Now I have a cruise control that will operate from 60KMPH upwards with no 'hunting' no matter what the load is. Can give further details if needed.

Trevor
Logged
2008 Honda ST1300
1975 Honda CB750 F



"Having a positive mental attitude is asking how something can be done rather than saying it can’t be done"
 
The following users thanked this post: STroppy, ST2UP, Abe, cravenhaven

Online cravenhaven

  • Sr. Member
  • ****
  • Posts: 346
  • Thanked: 113 times
  • Coomba Bay, NSW
Re: Rostra CC fine tuning
« Reply #3 on: February 02, 2016, 12:52:40 PM »
Quote from: tremarg on January 25, 2016, 11:57:27 AM
The speed corrector from Jaycar is necessary and will bring you into the pulse range for the Rostra. However, I spent some years trying to resolve the sensitivity issue. This was fixed by halving the mechanical operation of the throttle. Now I have a cruise control that will operate from 60KMPH upwards with no 'hunting' no matter what the load is. Can give further details if needed.

Trevor

Yes please, I am just about to install my Rostra unit. Any info, particularly throttle connection and sensor pickup would be appreciated.

Allan
Logged
 

Online cravenhaven

  • Sr. Member
  • ****
  • Posts: 346
  • Thanked: 113 times
  • Coomba Bay, NSW
Re: Rostra CC fine tuning
« Reply #4 on: February 11, 2016, 04:12:06 PM »
Finally got the Rostra CC installed and operational. It took me way... longer than expected while I made up the throttle connections and even the wiring got complicated until I drew my own circuit layout instead of interpreting others on the fly.
Thanks heaps to Tremarg for helping me sort out the tuning issue with the system, it now works a treat and I'm looking forward to a long ride (aka Perth NR) to really appreciate it. I still have a couple of minor attributes to sort out but they aren't critical to the operation.
Logged
 
The following users thanked this post: Abe, PC
Pages: [1]   Go Up
« previous next »