« previous next »
Pages: [1]   Go Down

Author Topic: MCL Highway Blades WANTED  (Read 3521 times)

Offline gone-cruising

  • gone-cruising
  • Newbie
  • *
  • Posts: 39
  • Thanked: 15 times
  • gone-cruising
MCL Highway Blades WANTED
« on: March 03, 2018, 08:46:59 PM »
Hi Guys,
Wanting to buy a set of MCL Highway Blades for my ST1300 ride.
If anyone knows of someone with a set or they might be selling their bike and would sell them off it.
Please pass this on.  0412 445 966.
Cheers Steve  :13Candy
Logged
 

Online Biggles

  • "Top Dog" 10000 club
  • *****
  • Posts: 14272
  • Thanked: 2777 times
  • Bridgeman Downs, Brisbane
Re: MCL Highway Blades WANTED
« Reply #1 on: March 03, 2018, 09:34:21 PM »
Whatever happened to that guy on the Forum who borrowed a set to try and reverse-engineer them?
Logged
For the modern man who lives in the city, riding a bike might be one of the only ways to escape the humdrum monotony. To take off and ride. To be both at one with nature and one with the bike. To feel masculine. Adam Piggott

OzSTOC #16  STOC #6135  FarR #509  IBA #54927
 

Offline gone-cruising

  • gone-cruising
  • Newbie
  • *
  • Posts: 39
  • Thanked: 15 times
  • gone-cruising
Re: MCL Highway Blades WANTED
« Reply #2 on: March 04, 2018, 08:47:27 PM »
Hi Biggles,
They have been returned to Peter just last week and a big thanks to him for the opportunity to at least try and have them made here.
BUT they would have to be made on a multi-head Auto Milling machine to which there are none within this area.

We tried as far as Townsville- Mackay and couldn't find anyone. Brisbane/ Sydney/ Melb maybe.

First you need someone to have a laser reading design machine to produce a disk, then take that to the Multi-head machinist to setup for production. Cost aprox $3,000, production would need to be a min.. of 100 units. Then there's the anodizing and assembly costs.

Need I say more. Believe me I have tried..

Now for the good news, The tip-over bars are still on there way. With all S.S. materials supplied and production expected within the month!!!!!

Sorry but I tried B

Cheers Steve  :13Candy
Logged
 

Offline gone-cruising

  • gone-cruising
  • Newbie
  • *
  • Posts: 39
  • Thanked: 15 times
  • gone-cruising
Re: MCL Highway Blades WANTED
« Reply #3 on: March 04, 2018, 08:49:56 PM »
And by the way there was only a hand full of possible sales that showed interest.
Logged
 

Online Biggles

  • "Top Dog" 10000 club
  • *****
  • Posts: 14272
  • Thanked: 2777 times
  • Bridgeman Downs, Brisbane
Re: MCL Highway Blades WANTED
« Reply #4 on: March 05, 2018, 01:40:44 PM »
Quote from: gone-cruising on March 04, 2018, 08:47:27 PM
Hi Biggles,
They have been returned to Peter just last week and a big thanks to him for the opportunity to at least try and have them made here.
BUT they would have to be made on a multi-head Auto Milling machine to which there are none within this area.

We tried as far as Townsville- Mackay and couldn't find anyone. Brisbane/ Sydney/ Melb maybe.

First you need someone to have a laser reading design machine to produce a disk, then take that to the Multi-head machinist to setup for production. Cost aprox $3,000, production would need to be a min.. of 100 units. Then there's the anodizing and assembly costs.

That makes the ones from the States @ $280 a pair cheap!  Someone over there has got the set-up, but obviously not the motivation.
It's a darn shame, because even owning a pair doesn't guarantee you're set for life, because if you have a tip-over with one extended, it bends (understandably) but unlike steel, it doesn't bend back straight.      :-[    DAMHIK
Logged
For the modern man who lives in the city, riding a bike might be one of the only ways to escape the humdrum monotony. To take off and ride. To be both at one with nature and one with the bike. To feel masculine. Adam Piggott

OzSTOC #16  STOC #6135  FarR #509  IBA #54927
 

Offline gone-cruising

  • gone-cruising
  • Newbie
  • *
  • Posts: 39
  • Thanked: 15 times
  • gone-cruising
Re: MCL Highway Blades WANTED
« Reply #5 on: March 05, 2018, 08:50:23 PM »
Hi Biggles
Where can I get them from in the states for $280??????
And if anyone can give me a contact NUMBER, EMAIL ADDRESS or WEB SITE I'd like it.
I've sent 7 emails to them at 2 different addresses and tried phoning on numerous occasions. With no reply, returned emails with not responding and if you Google the address there is no signage for that address its a postal distribution house.
If you phone local dealers and wholesalers none of them know where they are now or if they are even open.
Talk about frustrating.  B give me a call 0412 445 966.
Cheers Steve  :13Candy 
Logged
 

Online Brookester

  • Brookester
  • Sr. Member
  • ****
  • Posts: 431
  • Thanked: 237 times
  • ST Legend
Re: MCL Highway Blades WANTED
« Reply #6 on: March 05, 2018, 08:55:23 PM »
If MCL is referring to Motorcycle Larry Inc they closed up shop some time ago...daughter had tried to run the business after his passing but it all got too much..pity because they had some great gear
Logged
One day you will wake up and there won't be anymore time to do the things you've always wanted so do them NOW!!!
Remember there are 7 days in a week and Someday isn't one of them!
 

Online Biggles

  • "Top Dog" 10000 club
  • *****
  • Posts: 14272
  • Thanked: 2777 times
  • Bridgeman Downs, Brisbane
Re: MCL Highway Blades WANTED
« Reply #7 on: March 06, 2018, 09:17:10 AM »
Quote from: Brookester on March 05, 2018, 08:55:23 PM
If MCL is referring to Motorcycle Larry Inc they closed up shop some time ago...daughter had tried to run the business after his passing but it all got too much..pity because they had some great gear

Yep "gone-cruising"- that's the one, and that's why I alluded to the equipment being there with no-one willing or able to operate it.
Logged
For the modern man who lives in the city, riding a bike might be one of the only ways to escape the humdrum monotony. To take off and ride. To be both at one with nature and one with the bike. To feel masculine. Adam Piggott

OzSTOC #16  STOC #6135  FarR #509  IBA #54927
 

Offline gone-cruising

  • gone-cruising
  • Newbie
  • *
  • Posts: 39
  • Thanked: 15 times
  • gone-cruising
Re: MCL Highway Blades WANTED
« Reply #8 on: March 06, 2018, 07:56:48 PM »
Biggles please give me a call 0412 445 966,
You guys have been out there with these bikes for a long time.
Cheers Steve  :13Candy
« Last Edit: March 08, 2018, 11:20:15 PM by gone-cruising »
Logged
 
Pages: [1]   Go Up
« previous next »