« previous next »
Pages: [1]   Go Down

Author Topic: Fuel Cap hard to remove  (Read 4407 times)

Chops

  • Guest
Fuel Cap hard to remove
« on: October 10, 2014, 02:19:38 PM »
Saw this on a US site and it works great
"The ST 1100 gas cap will get harder to get off but some grease will help this The trick is to apply the grease to the upper surface of the gasket, the surface that contacts the gas cap. Try it, you will be surprised how much better this works.
Logged
 

Offline johnnyYTED

  • Supreme "2000" Club Member
  • *****
  • Posts: 2254
  • Thanked: 853 times
  • STranger 1100 n BEEstY 1330cc
Re: Fuel Cap hard to remove
« Reply #1 on: October 10, 2014, 02:32:21 PM »
 :dred11
 :thumb I'm going to grease my seal as my cap can be very tight  especially when vapour pressure and temps are up... I'll report on it in a week or so.   may help my times on the SS1600 next weekend, :hatwave  thamks Dallas for the tip..  :thumbs
Logged
Picton  if it doesn’t flood higher than previous times.
mobile 047 4488 436 
IBA#59147, FarRider #732
STranger 1998 ST1100, x Police
STrangler ST1300 2007 Charcoal Grey.
BEEstY 2017 Can-Am Daytona 1330.
maybe something with a little extra
:dred11 :Spyder
 

Offline RubenCan

  • Tipovers = 3.
  • Legendary Member
  • *****
  • Posts: 540
  • Thanked: 107 times
  • 1992 ST 1100
Re: Fuel Cap hard to remove
« Reply #2 on: October 10, 2014, 02:41:45 PM »
johnny, I concur with Dallas. I get a lot of pressure build up and it used to be hell to untwist on a hot day at the servo. I used a fair amount of grease (wiped off the excess) between the gasket and the metal part of the fuel cap and it now comes off very smoothly, without any effort. I just repeat the process every 12 months or so.
Logged
Ruben
:blu13  :
1st Bike - 1980 Honda CB250N (Sold)
2nd Bike - 1978 Suzuki GS750 (Sold)
3rd Bike - 1992 ST1100 (Sold)
4th Bike - Current Steed 2015 F6B
5th Bike - Also current STeed 2005 ST1300
Ulysses # 61761 StGeorge Sutherland Branch
OZSToc # 145
 

Offline Biggles

  • "Top Dog" 10000 club
  • *****
  • Posts: 14269
  • Thanked: 2769 times
  • Bridgeman Downs, Brisbane
Re: Fuel Cap hard to remove
« Reply #3 on: October 10, 2014, 03:03:43 PM »
It's been too long since my ST1100 days, but I recall that was an excellent trick.
Replace the grease every few months as Reuben says, because the fuel and vapour gradually dissolve it.
Logged
For the modern man who lives in the city, riding a bike might be one of the only ways to escape the humdrum monotony. To take off and ride. To be both at one with nature and one with the bike. To feel masculine. Adam Piggott

OzSTOC #16  STOC #6135  FarR #509  IBA #54927
 

Offline Bluey

  • Sr. Member
  • ****
  • Posts: 393
  • Thanked: 6 times
  • Burleigh Heads, Qld
Re: Fuel Cap hard to remove
« Reply #4 on: October 10, 2014, 09:16:53 PM »
It works for me. A great tip.
Logged
'99 ST1100
 

Offline alans1100

  • 1999 ST1100A
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6248
  • Thanked: 1161 times
  • Alan, Peterborough, SA
Re: Fuel Cap hard to remove
« Reply #5 on: October 10, 2014, 11:44:59 PM »
Since it's warmed up a little over the past couple weeks I haven't noticed the fuel cap being a little harder to remove compared to the cooler months: yet.

Or over 8 years I've got used to it.......nah!!! can't be that as last summer I needed two hands to undo the cap on a couple of fills. So, it's out to the tool shed to find (and I do mean find) the grease and do mine. I saw it yesterday but now that I want it I won't be able to find it.
Logged
1999 :bl11  2004 :13Candy

FarRider #921- BR15, BR17, CR1

 

Offline spanner

  • Blue is better .... apparently
  • Legendary "1000 Club" Member
  • *****
  • Posts: 1356
  • Thanked: 181 times
  • legend in my own match box.
Re: Fuel Cap hard to remove
« Reply #6 on: December 10, 2014, 11:45:29 AM »
any particular grease you use or just some General Purpose?
Logged
F.R. #905

I.B.A. # 63008

I acknowledge the Bindal and Wulgurukaba traditional custodians of this Australian land that I work, live and play on, and pay my respect to their cultures, their ancestors and to the elders, past, present and all future generations.
 

Offline johnnyYTED

  • Supreme "2000" Club Member
  • *****
  • Posts: 2254
  • Thanked: 853 times
  • STranger 1100 n BEEstY 1330cc
Re: Fuel Cap hard to remove
« Reply #7 on: December 10, 2014, 11:58:35 AM »
 :dred11
Well that was a long week..  :grin
I used a marine grade molly grease  :thumb and my wriST certainly appreciates it. :thumbs
 My fuel cap comes of as easy as now,, so guys even vasoline  will grease it up..juST dont use too much :-(((
Logged
Picton  if it doesn’t flood higher than previous times.
mobile 047 4488 436 
IBA#59147, FarRider #732
STranger 1998 ST1100, x Police
STrangler ST1300 2007 Charcoal Grey.
BEEstY 2017 Can-Am Daytona 1330.
maybe something with a little extra
:dred11 :Spyder
 

Online Brock

  • Tardis Tech
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 8886
  • Thanked: 1848 times
  • White is the fastest
Re: Fuel Cap hard to remove
« Reply #8 on: December 10, 2014, 04:40:27 PM »
Put the smear of grease between the lid itself and the seal, not the tank and seal.
Logged
Brock
Asian Correspondent
2003 Honda ST1100PY



Ulysses #32829
STOC #8239
OzSToc # ??
Kinross WA
 

Offline Philbo

  • Full Member
  • ***
  • Posts: 145
  • Thanked: 76 times
  • Old,not bold
Re: Fuel Cap hard to remove
« Reply #9 on: December 10, 2014, 06:27:33 PM »
I use Vaseline on the upper side of the washer.  It seems to last a year or so, Phil
Logged
Ermagard
 
Pages: [1]   Go Up
« previous next »